International Journal of Engineering

Main Subjects = Mechanical Engineering

Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces

Volume 35, Issue 12, December 2022, Pages 2291-2296

B. Jalili; A. Mousavi; P. Jalili; A. Shateri; D. Domiri Ganji

Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface

Volume 35, Issue 12, December 2022, Pages 2337-2343

S. Talouti; D. Benzerga; H. Abdelkader

Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation

Volume 35, Issue 12, December 2022, Pages 2350-2358

D. Doreswamy; S. S. Menon; J. M. D'Souza; S. K. Bhat

A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution

Volume 35, Issue 12, December 2022, Pages 2386-2394

P. Jalili; B. Jalili; A. Shateri; D. Domiri Ganji

Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations

Volume 35, Issue 11, November 2022, Pages 2092-2101

P. Mehdianfar; Y. Shabani; K. Khorshidi

In Silico Analysis of Stem Cells Mechanical Stimulations for Mechnoregulation Toward Cardiomyocytes

Volume 35, Issue 11, November 2022, Pages 2229-2237

M. Ebad; B. Vahidi

Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region

Volume 35, Issue 11, November 2022, Pages 2238-2246

S. Nagiredla; S. Joladarashi; H. Kumar

Effect of Tubular Solar Absorber on Performance of Counterflow Double Pass Solar Air Heater: Experimental and Numerical Studies

Volume 35, Issue 10, October 2022, Pages 2007-2017

N. F. Hussein; S. T. Ahmed; A. L. Ekaid

Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process

Volume 35, Issue 9, September 2022, Pages 1707-1715

M. Mahmoodi; H. Tagimalek; M. R. Maraki; S. Karimi

Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution

Volume 35, Issue 8, August 2022, Pages 1479-1487

K. Venugopal; P. Halder; V. Susarla; S. Palanivelu

Effect of Suspension System Stiffness on Dynamic Load Action Chassis Multi-purpose Forest Fire Fighting Vehicle

Volume 35, Issue 8, August 2022, Pages 1571-1578

L. Van Van; C. Hung Phi; N. Thanh Tung

Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks

Volume 35, Issue 8, August 2022, Pages 1651-1661

E. Tayari; L. Torkzadeh; D. Domiri Ganji; K. Nouri

Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis

Volume 35, Issue 8, August 2022, Pages 1662-1673

A. Ashabi; M. M. Peiravi; P. Nikpendar; S. Salehi Nasab; F. Jaryani

Structural Stiffness Matching Modeling and Active Design Approach for Multiple Stepped Cantilever Beam

Volume 35, Issue 7, July 2022, Pages 1227-1236

M. H. Zhang; Z. C. Cao; F. C. Xia; Z. Yao

Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils

Volume 35, Issue 7, July 2022, Pages 1330-1342

C. Guolong; C. Zheng; J. Wuyin

Collision-free Inverse Kinematics of Redundant Manipulator for Agricultural Applications through Optimization Techniques

Volume 35, Issue 7, July 2022, Pages 1343-1354

A. Sridhar Reddy; V. V. M. J. Satish Chembuly; V. V. S. Kesava Rao

Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach

Volume 35, Issue 7, July 2022, Pages 1355-1364

A. Lamba; . Vipin

Numerical Investigation on Oscillation Behavior of a Non-isothermal Self-excited Jet in a Cavity: The Effects of Reynolds Number and Temperature Differences

Volume 35, Issue 6, June 2022, Pages 1193-1201

M. Aminzadeh; J. Khadem; S. A. Zolfaghari; A. Omidvar

Numerical Investigation of Geometric Parameters Effects on Heat Transfer Enhancement in a Manifold Microchannel Heat Sink

Volume 35, Issue 5, May 2022, Pages 943-953

M. R. Babaei; G. A. Sheikhzadeh; A. A. Abbasian Arani

Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes

Volume 35, Issue 5, May 2022, Pages 954-966

Y. Noori; A. R. Teymourtash; B. Zafarmand

A Novel Curve for the Generation of the Non-circular Gear Tooth Profile

Volume 35, Issue 5, May 2022, Pages 1024-1036

N. H. Thai; N. T. Trung

Fouling Performance of A Horizontal Corrugated Tube due to Air Injection

Volume 35, Issue 5, May 2022, Pages 1074-1081

H. Sharifi; P. Ahmadi Moghaddam; S. Jafarmadar; A. M. Nikbakht; A. Hosainpour

Advanced Exergy Scrutiny of a Dual-loop Organic Rankine Cycle for Waste Heat Recovery of a Heavy-duty Stationary Diesel Engine

Volume 35, Issue 4, April 2022, Pages 644-656

H. Boodaghi; M. M. Etghani; K. Sedighi

Influence of Multiple Repairs on the Quality of Duplex Welded Joints

Volume 35, Issue 4, April 2022, Pages 675-684

A. Bennabi; A. Adjeloua; H. Ameur; N. Boualem; M. Younsi

Experimental Examination of Gas-liquid Two-phase Flow Patterns in an Inclined Rectangular Channel with 90° Bend for Various Vertical Lengths

Volume 35, Issue 4, April 2022, Pages 685-691

M. Vatani; D. Domiri-Ganji

Journal Archive

Volume 37 (2024)

Volume 36 (2023)

Volume 35 (2022)

Volume 34 (2021)

Volume 33 (2020)

Volume 32 (2019)

Volume 31 (2018)

Volume 30 (2017)

Volume 29 (2016)

Volume 28 (2015)

Volume 27 (2014)

Volume 26 (2013)

Volume 25 (2012)

Volume 24 (2011)

Volume 23 (2010)

Volume 22 (2009)

Volume 21 (2008)

Volume 20 (2007)

Volume 19 (2006)

Volume 18 (2005)

Volume 17 (2004)

Volume 16 (2003)

Volume 15 (2002)

Volume 14 (2001)

Volume 13 (2000)

Volume 12 (1999)

Volume 11 (1998)

Volume 10 (1997)

Volume 9 (1996)

Volume 8 (1995)

Volume 7 (1994)

Volume 6 (1993)

Volume 5 (1992)

Volume 4 (1991)

Volume 3 (1990)

Volume 2 (1989)

Volume 1 (1988)