Author Index

A

  • Abbasi, B. A Simple Transformation Method in Skewness Reduction [Volume 24, Issue 2, 2011, Pages 169-175]
  • Abbasi Nargesi, Farshad Synthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy [Volume 24, Issue 2, 2011, Pages 123-130]
  • Abbaspour, Mohammad EXPERIMENTAL INVESTIGATION OF DRAG REDUCTION ON AHMED MODEL USING A COMBINATION OF ACTIVE FLOW CONTROL METHODS [Volume 24, Issue 4, 2011, Pages 403-410]
  • Abdollahi, Reza Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
  • Abghari, Ramin Design of a New Instrument for Measuring Frictional Properties of Woven Fabrics [Volume 24, Issue 4, 2011, Pages 387-392]
  • Akhondizadeh, Mehdi Dynamic Analysis of A Three-Rotor Flexible Coupling with Angular Misalignment [Volume 24, Issue 2, 2011, Pages 155-164]
  • Alamatian, javad A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads [Volume 24, Issue 4, 2011, Pages 341-350]
  • Alemzadeh, Iran Xylanase Production under Solid State Fermentation by Aspergillus niger [Volume 24, Issue 3, 2011, Pages 197-208]
  • Alim, Md. Abdul Performance of SST k-ω Turbulence Model for Computation of Viscous Drag of Axisymmetric Underwater Bodies [Volume 24, Issue 2, 2011, Pages 139-146]
  • Amoozad-Khalili, Hossein Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
  • Arab, Najmeddin Analytical Modeling of Axi-Symmetric Sheet Metal Forming [Volume 24, Issue 1, 2011, Pages 55-63]
  • Arab Markadeh, G. R. An Optimal Selection of Induction Heating Capacitance by Genetic Algorithm Considering Dissipation Loss Caused by ESR (TECHNICAL NOTE) [Volume 24, Issue 1, 2011, Pages 19-26]
  • Ardeshiri, Anam An Approach for the Estimation of Aggregate Potential Telecommuting Demand [Volume 24, Issue 4, 2011, Pages 331-340]
  • Arefmanesh, Ali Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
  • Aryanezhad, M.B. A Mathematical Method for Managing the System Constraint [Volume 24, Issue 1, 2011, Pages 37-47]
  • Asadi, Sekineh Image Quality Enhancement Using Pixel Wise Gamma Correction [Volume 24, Issue 4, 2011, Pages 301-312]
  • Askari Lasaki, Salar Mathematical Modeling of Potential Flow over a Rotating Cylinder (RESEARCH NOTE) [Volume 24, Issue 1, 2011, Pages 55-63]
  • Ataeian, Arash An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes [Volume 24, Issue 2, 2011, Pages 191-196]
  • Azazari.khosroshahi, rasoul Synthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy [Volume 24, Issue 2, 2011, Pages 123-130]

B

  • Badri, Seyed Amin A Mathematical Method for Managing the System Constraint [Volume 24, Issue 1, 2011, Pages 37-47]
  • Bagheri, Ahmad Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
  • Bagheri, Ahmad Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]
  • Bagheri, Ahmad Multi-Objective Optimization of Solar Thermal Energy Storage Using Hybrid of Particle Swarm Optimization and Multiple Crossover and Mutation Operator [Volume 24, Issue 4, 2011, Pages 367-376]
  • Bagheri, N. EFFECT OF Si ANTIOXIDANT ON THE RATE OF OXIDATION OF CARBON IN MgO- C REFRACTORY [Volume 24, Issue 4, 2011, Pages 357-366]
  • Bambaeechee, Mohsen Static and dynamic nonlinear analysis of steel frame with semi-rigid connections [Volume 24, Issue 3, 2011, Pages 203-222]
  • Baradaran, Gholam hosein Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
  • Basnet, Ritu Finite Capacity Queuing System with Vacations and Server Breakdowns [Volume 24, Issue 4, 2011, Pages 387-394]

C

  • Chaube, S Analysis of the Reliability of a Three-Component System with Two Repairmen [Volume 24, Issue 4, 2011, Pages 395-402]

D

  • Dariabeigi, Ehasan An Optimal Selection of Induction Heating Capacitance by Genetic Algorithm Considering Dissipation Loss Caused by ESR (TECHNICAL NOTE) [Volume 24, Issue 1, 2011, Pages 19-26]
  • Darvishi, D. Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
  • Drake, P. R. Global Supply Chain Management under Carbon Emission Trading Program Using Mixed Integer Programming and Genetic Algorithm [Volume 24, Issue 1, 2011, Pages 37-53]

E

  • Ehsany, Rouhollah Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
  • Ekhteraei Toussi, Hamid Frequency Analysis for a Timoshenko Beam Located on an Elastic Foundation [Volume 24, Issue 1, 2011, Pages 87-105]
  • Elias, Md. Mixed Convection Flow in a Rectangular Ventilated Cavity with a Heat Conducting Solid Circular Cylinder at the Center [Volume 24, Issue 1, 2011, Pages 93-105]

F

  • Farrahi, G. H. Side Effects of Shot Peening on Fatigue Crack Initiation Life [Volume 24, Issue 3, 2011, Pages 275-280]
  • Fatahi, Mohsen Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
  • Fazlollahtabar, Hamed An Interactive Allocation for Depot-Customer-Depot in a Multi Aspect Supply Chain Network [Volume 24, Issue 4, 2011, Pages 367-376]
  • Fotros, Farshad Effects of Geometric Nonlinearity on Stress Analysis in Large Amplitude Vibration of thin Circular Functionally Graded Plates With Rigid Core [Volume 24, Issue 3, 2011, Pages 281-290]

G

  • Gandjalikhan Nassab, S.A. Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow [Volume 24, Issue 3, 2011, Pages 301-319]
  • Gharebagh, vahid STATIC AND DYNAMIC RESPONSE OF CARBON NANOTUBE-BASED NANOTWEEZERS [Volume 24, Issue 4, 2011, Pages 377-386]
  • Ghazvinizadeh, Hossein Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
  • Ghimire, Ram Finite Capacity Queuing System with Vacations and Server Breakdowns [Volume 24, Issue 4, 2011, Pages 387-394]
  • Ghodratnama, Ali Solving a new bi-objective model for a cell formation problem considering labor allocation by multi-objective particle swarm optimization [Volume 24, Issue 3, 2011, Pages 249-258]
  • Ghorbanpour, ali Postbuckling Equilibrium Path of a Long Thin-Walled Cylindrical Shell (Single-Walled Carbon Nanotube) under Axial Compression Using Energy Method [Volume 24, Issue 1, 2011, Pages 79-86]
  • Golpaigani, Hamid Reza Single Machine Scheduling Problem with Precedence Constraints and Deteriorating Jobs [Volume 24, Issue 2, 2011, Pages 115-122]
  • GUPTA, SORABH Performance Modeling of Power Generation System of a Thermal Plant [Volume 24, Issue 3, 2011, Pages 239-248]

H

  • Habibi, Alireza Nonlinear sensitivity Analysis of RCMRF Considering Both Axial and Flexure Effects (RESEARCH NOTE) [Volume 24, Issue 3, 2011, Pages 223-238]
  • Haghshenas, D. F. Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
  • Halali, Mohammad Effect of CO2 Partial Pressure on the Thermal Decomposition Kinetics of Zinc Carbonate Hydroxide (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 263-268]
  • Hamawand, Ihsan Effect of colloidal Particles associated with the liquid bridge in sticking during drying in Superheated Steam [Volume 24, Issue 2, 2011, Pages 119-126]
  • Hamedi Sangari, Alireza Laboratory Studies on the Effect of Vertical Gravel Column Drains on Liquefaction Potential [Volume 24, Issue 3, 2011, Pages 209-226]
  • Hamta, Nima Single Machine Scheduling Problem with Precedence Constraints and Deteriorating Jobs [Volume 24, Issue 2, 2011, Pages 115-122]
  • Han, Qiang Postbuckling Equilibrium Path of a Long Thin-Walled Cylindrical Shell (Single-Walled Carbon Nanotube) under Axial Compression Using Energy Method [Volume 24, Issue 1, 2011, Pages 79-86]
  • Hassanpour, Hamid An Improved Pixon-Based Approach for Image Segmentation [Volume 24, Issue 1, 2011, Pages 25-35]
  • Hassanpour, Hamid Image Quality Enhancement Using Pixel Wise Gamma Correction [Volume 24, Issue 4, 2011, Pages 301-312]
  • Hassanzadeh Nemati, Nahid Characterization of Constrained Aged Niti Strips for Using In Artificial Muscle Actuators (Technical Note) [Volume 24, Issue 4, 2011, Pages 321-330]
  • Heidarinejad, Ghassem Simulation of Premixed Combustion Flow around Circular Cylinder using Hybrid Random Vortex [Volume 24, Issue 3, 2011, Pages 269-278]
  • Heydar, M. An integrated AHP-VIKOR methodology for plant location selection [Volume 24, Issue 2, 2011, Pages 127-137]
  • H-Gangaraj, S.M. Side Effects of Shot Peening on Fatigue Crack Initiation Life [Volume 24, Issue 3, 2011, Pages 275-280]
  • Hosseinzadeh, Naghdali Vibration Mechanism of 13th Century Historical Menar-Jonban Monument in Iran [Volume 24, Issue 4, 2011, Pages 313-324]

J

  • Jafari, Saeed Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow [Volume 24, Issue 3, 2011, Pages 301-319]
  • Jafarmadar, samad Numerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition [Volume 24, Issue 2, 2011, Pages 165-179]
  • Jahanmiri, Mohsen EXPERIMENTAL INVESTIGATION OF DRAG REDUCTION ON AHMED MODEL USING A COMBINATION OF ACTIVE FLOW CONTROL METHODS [Volume 24, Issue 4, 2011, Pages 403-410]
  • Jahanshahi, Ebrahim Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow [Volume 24, Issue 3, 2011, Pages 301-319]

K

  • Karbassi, Seyed Mehdi Design of a New Instrument for Measuring Frictional Properties of Woven Fabrics [Volume 24, Issue 4, 2011, Pages 387-392]
  • Karim, Md. Performance of SST k-ω Turbulence Model for Computation of Viscous Drag of Axisymmetric Underwater Bodies [Volume 24, Issue 2, 2011, Pages 139-146]
  • Kaveh, Ali Calculation of Buckling Load and Eigen Frequencies for Planar Truss Structures with Multi-Symmetry [Volume 24, Issue 4, 2011, Pages 351-366]
  • Kazemi, M. T. Mixed Mode Fracture in Reinforced Concrete with Low Volume Fraction of Steel Fibers [Volume 24, Issue 1, 2011, Pages 1-18]
  • Kazemipoor, Hamed Solving a bi-objective manpower scheduling problem considering the utility of objective functions [Volume 24, Issue 3, 2011, Pages 251-262]
  • Kebbati, Youssef Modular approach for an ASIC integration of electrical drive controls [Volume 24, Issue 2, 2011, Pages 107-118]
  • Keramati, A. Minimizing the supplying cost of leverage items: a mathematical approach [Volume 24, Issue 3, 2011, Pages 259-274]
  • Kermanpur, Ahmad Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
  • Keshavarz Alamdari, Eskandar Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
  • Khalil Arya, S. Numerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition [Volume 24, Issue 2, 2011, Pages 165-179]
  • Khanahmadi, Morteza Xylanase Production under Solid State Fermentation by Aspergillus niger [Volume 24, Issue 3, 2011, Pages 197-208]
  • Khatamnejad, Hassan Numerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition [Volume 24, Issue 2, 2011, Pages 165-179]
  • Khazaei, Mohammad Solving a new bi-objective model for a cell formation problem considering labor allocation by multi-objective particle swarm optimization [Volume 24, Issue 3, 2011, Pages 249-258]
  • Kheirkhah, Mohammad hosein Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
  • Kheybari, Shahram Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]
  • Khoddami, A. An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes [Volume 24, Issue 2, 2011, Pages 191-196]
  • Khoshbakhti Saray, R. Optimization of GRI-mech 3.0 Mechanism using HCCI Combustion Models and Genetic Algorithm [Volume 24, Issue 2, 2011, Pages 155-168]
  • Kowsari, Milad STATISTICAL PREDICTION OF THE SEQUENCE OF LARGE EARTHQUAKES IN IRAN [Volume 24, Issue 4, 2011, Pages 325-336]
  • Kumar, N. A Computational Study of Metabolism in Sprinting (TECHNICAL NOTE) [Volume 24, Issue 1, 2011, Pages 75-80]

L

  • Liang, Qiaokang Flexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot [Volume 24, Issue 4, 2011, Pages 377-386]

M

  • Mahdavi, Iraj An Interactive Allocation for Depot-Customer-Depot in a Multi Aspect Supply Chain Network [Volume 24, Issue 4, 2011, Pages 367-376]
  • Mahmoodabadi, Mohammad Javad Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
  • Mahmoodabadi, Mohammad Javad Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]
  • Mahshid, S. EFFECT OF Si ANTIOXIDANT ON THE RATE OF OXIDATION OF CARBON IN MgO- C REFRACTORY [Volume 24, Issue 4, 2011, Pages 357-366]
  • Makui, A. Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
  • Makui, A. Solving a new bi-objective model for a cell formation problem considering labor allocation by multi-objective particle swarm optimization [Volume 24, Issue 3, 2011, Pages 249-258]
  • Mamdoohi, Amir Reza An Approach for the Estimation of Aggregate Potential Telecommuting Demand [Volume 24, Issue 4, 2011, Pages 331-340]
  • Marandi, Seyed Morteza Laboratory Studies on the Effect of Vertical Gravel Column Drains on Liquefaction Potential [Volume 24, Issue 3, 2011, Pages 209-226]
  • Marandi, Seyed Morteza Reducing the Forces Caused by Earthquake on Retaining Walls Using Granulated Rubber-Soil Mixture [Volume 24, Issue 4, 2011, Pages 337-350]
  • Mardani, Esfandiar Physical Nonlinear Analysis of a Beam Under Moving Harmonic Load [Volume 24, Issue 2, 2011, Pages 107-113]
  • Mardani, Esfandiar Analysis of a Beam under Moving Loads [Volume 24, Issue 3, 2011, Pages 227-236]
  • Meratian, Mahmood Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
  • Minouei, Hossein Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
  • Mirzahosseinian, H. Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
  • Mohagheghian, Iman A Particle Swarm Optimization Algorithm for Mixed-Variable Nonlinear Problems [Volume 24, Issue 1, 2011, Pages 65-78]
  • Mohajeri, Amir An Interactive Allocation for Depot-Customer-Depot in a Multi Aspect Supply Chain Network [Volume 24, Issue 4, 2011, Pages 367-376]
  • Mohammadimehr, Mehdi Postbuckling Equilibrium Path of a Long Thin-Walled Cylindrical Shell (Single-Walled Carbon Nanotube) under Axial Compression Using Energy Method [Volume 24, Issue 1, 2011, Pages 79-86]
  • Mousavi, S.M. An integrated AHP-VIKOR methodology for plant location selection [Volume 24, Issue 2, 2011, Pages 127-137]

N

  • Naei, M.H. Effects of Geometric Nonlinearity on Stress Analysis in Large Amplitude Vibration of thin Circular Functionally Graded Plates With Rigid Core [Volume 24, Issue 3, 2011, Pages 281-290]
  • Nahvi, Hassan A Particle Swarm Optimization Algorithm for Mixed-Variable Nonlinear Problems [Volume 24, Issue 1, 2011, Pages 65-78]
  • Nazaryan, Ernest Analytical Modeling of Axi-Symmetric Sheet Metal Forming [Volume 24, Issue 1, 2011, Pages 55-63]
  • Niaki, S.T.A. A Simple Transformation Method in Skewness Reduction [Volume 24, Issue 2, 2011, Pages 169-175]
  • Nobari, Amir Hossein Effect of CO2 Partial Pressure on the Thermal Decomposition Kinetics of Zinc Carbonate Hydroxide (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 263-268]

O

  • Ostovari, Amir Hossein Design of a New Instrument for Measuring Frictional Properties of Woven Fabrics [Volume 24, Issue 4, 2011, Pages 387-392]

P

  • Pashaei, M. H. Effects of Geometric Nonlinearity on Stress Analysis in Large Amplitude Vibration of thin Circular Functionally Graded Plates With Rigid Core [Volume 24, Issue 3, 2011, Pages 281-290]
  • Pishahang, Mehdi Effect of CO2 Partial Pressure on the Thermal Decomposition Kinetics of Zinc Carbonate Hydroxide (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 263-268]
  • Pourfallah, Mohsen Numerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition [Volume 24, Issue 2, 2011, Pages 165-179]

R

  • Rahman, Md. Mixed Convection Flow in a Rectangular Ventilated Cavity with a Heat Conducting Solid Circular Cylinder at the Center [Volume 24, Issue 1, 2011, Pages 93-105]
  • Rahman, Md. Performance of SST k-ω Turbulence Model for Computation of Viscous Drag of Axisymmetric Underwater Bodies [Volume 24, Issue 2, 2011, Pages 139-146]
  • Ram, Mangey Analysis of the Reliability of a Three-Component System with Two Repairmen [Volume 24, Issue 4, 2011, Pages 395-402]
  • Ramiar, Abas The Effect of Viscous Dissipation and Variable Properties on Nanofluids Flow in Two Dimensional Microchannels [Volume 24, Issue 2, 2011, Pages 131-142]
  • Rana, U S Numerical Solution of Pricing of European Put Option with Stochastic Volatility [Volume 24, Issue 2, 2011, Pages 189-202]
  • Ranjbar, Abolfazl The Effect of Viscous Dissipation and Variable Properties on Nanofluids Flow in Two Dimensional Microchannels [Volume 24, Issue 2, 2011, Pages 131-142]
  • Ranjbar-Bourani, M. Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
  • Razmi, J. Minimizing the supplying cost of leverage items: a mathematical approach [Volume 24, Issue 3, 2011, Pages 259-274]
  • Rezaeepazhand, Jalil A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads [Volume 24, Issue 4, 2011, Pages 341-350]
  • Rezaiee Pajand, M. Nonlinear Numerical Integration Scheme in Strain Space Plasticity [Volume 24, Issue 1, 2011, Pages 1-13]
  • Rezaiee Pajand, M. Static and dynamic nonlinear analysis of steel frame with semi-rigid connections [Volume 24, Issue 3, 2011, Pages 203-222]
  • Rostami, Hamid Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]

S

  • Sadafi, Mohamadhosein Multi-Objective Optimization of Solar Thermal Energy Storage Using Hybrid of Particle Swarm Optimization and Multiple Crossover and Mutation Operator [Volume 24, Issue 4, 2011, Pages 367-376]
  • Sadegheih, A. Global Supply Chain Management under Carbon Emission Trading Program Using Mixed Integer Programming and Genetic Algorithm [Volume 24, Issue 1, 2011, Pages 37-53]
  • Sadeghian, Mojtaba Frequency Analysis for a Timoshenko Beam Located on an Elastic Foundation [Volume 24, Issue 1, 2011, Pages 87-105]
  • Sadrnezhaad, S.K. Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
  • Sadrnezhaad, S.K. Characterization of Constrained Aged Niti Strips for Using In Artificial Muscle Actuators (Technical Note) [Volume 24, Issue 4, 2011, Pages 321-330]
  • Sadrnezhaad, S.K. EFFECT OF Si ANTIOXIDANT ON THE RATE OF OXIDATION OF CARBON IN MgO- C REFRACTORY [Volume 24, Issue 4, 2011, Pages 357-366]
  • Safari, Leila Fully Differential Current Buffers Based on a Novel Common Mode Separation Technique [Volume 24, Issue 3, 2011, Pages 237-249]
  • Safikhani, Hamed Multi-Objective Optimization of Solar Thermal Energy Storage Using Hybrid of Particle Swarm Optimization and Multiple Crossover and Mutation Operator [Volume 24, Issue 4, 2011, Pages 367-376]
  • Saidi, Ali Postbuckling Equilibrium Path of a Long Thin-Walled Cylindrical Shell (Single-Walled Carbon Nanotube) under Axial Compression Using Energy Method [Volume 24, Issue 1, 2011, Pages 79-86]
  • Sarafrazi, S.R. Static and dynamic nonlinear analysis of steel frame with semi-rigid connections [Volume 24, Issue 3, 2011, Pages 203-222]
  • Seyedan, S.E. A Simple Transformation Method in Skewness Reduction [Volume 24, Issue 2, 2011, Pages 169-175]
  • Shahi1, Saideh Sadat Xylanase Production under Solid State Fermentation by Aspergillus niger [Volume 24, Issue 3, 2011, Pages 197-208]
  • Shahnazari, M.R. Comparison of Thermal Dispersion Effects for Single and two Phase Analysis of Heat Transfer in Porous Media [Volume 24, Issue 1, 2011, Pages 81-91]
  • Shahnazari Shahrezaei, Parisa Solving a bi-objective manpower scheduling problem considering the utility of objective functions [Volume 24, Issue 3, 2011, Pages 251-262]
  • Shahriarian, Soodabeh Simulation of Premixed Combustion Flow around Circular Cylinder using Hybrid Random Vortex [Volume 24, Issue 3, 2011, Pages 269-278]
  • Shahryari, Leila Calculation of Buckling Load and Eigen Frequencies for Planar Truss Structures with Multi-Symmetry [Volume 24, Issue 4, 2011, Pages 351-366]
  • Shakib, Najva An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes [Volume 24, Issue 2, 2011, Pages 191-196]
  • Sheikhzadeh, Ghanbar Ali Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
  • Shojaefard, M. H. Mathematical Modeling of Potential Flow over a Rotating Cylinder (RESEARCH NOTE) [Volume 24, Issue 1, 2011, Pages 55-63]
  • Singh, Dr. Numerical Modeling of Two-Layered Micropolar Fluid Through an Normal and Stenosed Artery [Volume 24, Issue 2, 2011, Pages 177-187]
  • Singh, S. B. Analysis of the Reliability of a Three-Component System with Two Repairmen [Volume 24, Issue 4, 2011, Pages 395-402]
  • SRIBENJACHOT, S. Global Supply Chain Management under Carbon Emission Trading Program Using Mixed Integer Programming and Genetic Algorithm [Volume 24, Issue 1, 2011, Pages 37-53]

T

  • Taimury, E. Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
  • Tavakkoli-Moghaddam, Reza An integrated AHP-VIKOR methodology for plant location selection [Volume 24, Issue 2, 2011, Pages 127-137]
  • Tavakkoli-Moghaddam, Reza Solving a new bi-objective model for a cell formation problem considering labor allocation by multi-objective particle swarm optimization [Volume 24, Issue 3, 2011, Pages 249-258]
  • Tavakkoli-Moghaddam, Reza Solving a bi-objective manpower scheduling problem considering the utility of objective functions [Volume 24, Issue 3, 2011, Pages 251-262]
  • Tewari, P.C Performance Modeling of Power Generation System of a Thermal Plant [Volume 24, Issue 3, 2011, Pages 239-248]
  • Tohidi, S.H Comparison Nanostructure Behaviour of Copper Species on the Silicamatrix Xerogels [Volume 24, Issue 2, 2011, Pages 147-153]
  • Torabi, M. Electrochemical Evaluation of PbO Nanoparticles as Anode for Lithium Ion Batteries (Technical Note) [Volume 24, Issue 4, 2011, Pages 351-356]

U

  • Unes, Unes Single Machine Scheduling Problem with Precedence Constraints and Deteriorating Jobs [Volume 24, Issue 2, 2011, Pages 115-122]

V

  • Vossoughi Shahvari, Fariborz Mixed Mode Fracture in Reinforced Concrete with Low Volume Fraction of Steel Fibers [Volume 24, Issue 1, 2011, Pages 1-18]

W

  • Wang, Yaonan Flexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot [Volume 24, Issue 4, 2011, Pages 377-386]

Y

  • Yaghmaei-Sabegh, Saman Stochastic Finite Fault Modeling for the 16 September 1978 Tabas, Iran, Earthquake [Volume 24, Issue 1, 2011, Pages 15-24]
  • Yazdani, Azad - STATISTICAL PREDICTION OF THE SEQUENCE OF LARGE EARTHQUAKES IN IRAN [Volume 24, Issue 4, 2011, Pages 325-336]
  • Yousefian, Hadi An Improved Pixon-Based Approach for Image Segmentation [Volume 24, Issue 1, 2011, Pages 25-35]
  • Yousefzadi Nobakht, Ali Optimization of GRI-mech 3.0 Mechanism using HCCI Combustion Models and Genetic Algorithm [Volume 24, Issue 2, 2011, Pages 155-168]