Numerical Modeling of Sediment-flow around Obstacle Inspired by Marine Sponges: Considering Body Configurations

Document Type : Original Article

Authors

Department of Civil and Environmental Engineering, Amirkabir University of Technology, Tehran, Iran

Abstract

Coral reefs are exposed to extinction due to the sediment blocking through coral colonies. In this condition, there is no practical solution that originates from nature. Among all aquatic animals, marine tubular sponges have marvelous mechanisms. These natural creatures can inspire the design of a device for managing sediment-flow hydrodynamics. They suck flow from body perforation and pump water and undigested materials from the top outlet. Therefore, coinciding with receiving nutrients, the flow becomes circulated. This may help the momentum transfer through the coral colonies. In the current study, a synthetic sponge by motivating the tubular sponges was designed. Synthetic sponges’ suction/pumping discharge was constant at 150 L/h. They have a body diameter of 8 and 15 cm and a height of 20 cm. The perforation area distribution changes to understand how it may influence sediment-flow hydrodynamics. The numerical modeling based on Reynolds Averaged Navier Stokes (RANS) equations and image processing technique (surface LIC) were deployed to determine the vortical flow patterns. Results confirmed that choosing the best body perforation configuration and area distribution can generate the dipole vortex. In this condition, a tornado combines with dipole and erodes the sediments to ≈ 30% near the bed. Moreover, the sediment concentration reduces to ≈ 20%  in the water column at X/D =1. In this condition, it can be observed that the emergence of specific vorticities and re-circulations develops the suspension of particles. Therefore, the synthetic sponge with precise design can be practical for enhancing the momentum transferring and preventing pollutant blockage among coral colonies.

Keywords

Main Subjects


  1. Woodroffe, C.D. and Webster, J.M., “Coral reefs and sea-level change”, Marine Geology, Vol. 352, (2014), 248-267. https://doi.org/10.1016/j.margeo.2013.12.006.
  2. Fabricius, K.E., “Effects of terrestrial runoff on the ecology of corals and coral reefs: Review and synthesis”, Marine Pollution Bulletin, Vol. 50, No. 2, (2005), 125-146. https://doi.org/10.1016/j.marpolbul.2004.11.028.
  3. Nace, T. Nearly all coral reefs will disappear over the next 20 years, scientists say. 2020; Available from: https://www.forbes.com/sites/trevornace/2020/02/24/70-90-percent-of-coral-reefs-will-disappear-over-the-next-20-years-scientists-say/?sh=5259cd1d7d87.
  4. Jr, J. and Graus, R., “Water flow and hydromechanical adaptations of branched reef corals”, Bulletin of Marine Science, Vol. 25, (1975), 112-125.
  5. Hossain, M.M. and Staples, A.E., “Passive vortical flows enhance mass transport in the interior of a coral colony”, Physics of Fluids, Vol. 31, No. 6, (2019), 061701. DOI: 10.1063/1.5094076.
  6. Hossain, M.M. and Staples, A.E., “Mass transport and turbulent statistics within two branching coral colonies”, Fluids, Vol. 5, No. 3, (2020), 153. https://doi.org/10.3390/fluids5030153.
  7. Folkard, A.M., “Hydrodynamics of model posidonia oceanica patches in shallow water”, Limnology and Oceanography, Vol. 50, No. 5, (2005), 1592-1600. https://doi.org/10.4319/lo.2005.50.5.1592.
  8. Bartzke, G., Siemann, L., Büssing, R., Nardone, P., Koll, K., Hebbeln, D. and Huhn, K., “Investigating the prevailing hydrodynamics around a cold-water coral colony using a physical and a numerical approach”, Frontiers in Marine Science, Vol. 8, (2021). DOI: 10.3389/fmars.2021.663304.
  9. Fernandes, M.C., Saadat, M., Cauchy-Dubois, P., Inamura, C., Sirota, T., Milliron, G., Haj-Hariri, H., Bertoldi, K. and Weaver, J.C., “Mechanical and hydrodynamic analyses of helical strake-like ridges in a glass sponge”, Journal of The Royal Society Interface, Vol. 18, No. 182, (2021), 20210559. https://doi.org/10.1098/rsif.2021.0559.
  10. Quen, L.K., Abu, A., Kato, N., Muhamad, P., Tan, L.K. and Kang, H.S., “Performance of two- and three-start helical strakes in suppressing the vortex-induced vibration of a low mass ratio flexible cylinder”, Ocean Engineering, Vol. 166, (2018), 253-261. https://doi.org/10.1016/j.oceaneng.2018.08.008.
  11. Region, P. and Leys, S.P., “Effects of sediment on glass sponges (porifera, hexactinellida) and projected effects on glass sponge reefs. (2013). DFO Canadian Science Advisory Secretariat Research Document, 74.
  12. Rickborn, A.J., “The spatial ecology of a coral reef sponge, Aplysina fistularis." (2014). Ph.D. Dissertations, Boston University
  13. Maddock, B. Yellow tube sponge. 2021; Available from: https://www.dimensions.com/.
  14. Rickborn, A.J., “The spatial ecology of a coral reef sponge, Aplysina fistularis”, Arizona State University, school of arts and sciences, Boston University, MA, (2010),
  15. Machałowski, T., Rusak, A., Wiatrak, B., Haczkiewicz-Leśniak, K., Popiel, A., Jaroszewicz, J., Żak, A., Podhorska-Okołów, M. and Jesionowski, T., “Naturally formed chitinous skeleton isolated from the marine demosponge Aplysina fistularis as a 3d scaffold for tissue engineering”, Materials, Vol. 14, No. 11, (2021), 2992. https://doi.org/10.1016/j.carbpol.2021.118750.
  16. Morganti, T.M., Ribes, M., Yahel, G. and Coma, R., “Size is the major determinant of pumping rates in marine sponges”, Frontiers in Physiology, Vol. 10, (2019), 1474-1474. DOI: 10.3389/fphys.2019.01474.
  17. Strehlow, B., Jorgensen, D., Webster, N., Pineda, M.C. and Duckworth, A., “Using a thermistor flowmeter with attached video camera for monitoring sponge excurrent speed and oscular behaviour”, PeerJournal, Vol. 4, (2016). DOI: 10.7717/peerj.2761.
  18. Ebtehaj, I., Azimi, H. and Bonakdari, H., “Numerical analysis of sediment transport in sewer pipe”, International Journal of Engineering, Transactions B: Applications, Vol. 28, No. 11, (2015),1564-1570. DOI:10.5829/idosi.ije.2015.28.11b.03.
  19. Jafarmadar, s., “The effects of pressure difference in nozzle’s two phase flow on the quality of exhaust mixture”, International Journal of Engineering, Transactions B: Applications, Vol. 26, No. 5, (2013), 553-562. DOI: 10.5829/idosi.ije.2013.26.05b.12.
  20. Rodríguez-Ocampo, P., Ring, M., Fontes, J., Alcerreca-Huerta, J., Mendoza, E. and Silva, R., “Cfd simulations of multiphase flows: Interaction of miscible liquids with different temperatures”, Water, Vol. 12, (2020), 2581. DOI: 10.3390/w12092581.
  21. Trimulyono, A., Chrismianto, D., Samuel, S. and Aslami, M.H., “Single-phase and two-phase smoothed particle hydrodynamics for sloshing in the low filling ratio of the prismatic tank”, International Journal of Engineering,Transactions B: Applications, Vol. 34, No. 5, (2021), 1345-1351. DOI: 10.5829/ije.2021.34.05b.30.
  22. Ltd., O. Openfoam manual. 2022; Available from: https://www.openfoam.com/documentation/.
  23. Coleman, N., “Effects of Suspended Sediment on the Open-Channel Velocity Distribution”, Water Resources Research, Vol. 22, No. 10, (1986) 1377-1384. https://doi.org/10.1029/WR022i010p01377
  24. BIRD, J. Sponges. 2014; Available from: https://www.youtube.com/watch?v=m8a0oNsDEx8.
  25. Hashempour, M. and Kolahdoozan, M., “Three-dimensional modeling of dilute sediment concentration around the synthetic sponge inspired by the tubular sponge mechanism”, Ocean Engineering, Vol. 271, 113799. https://doi.org/10.1016/j.oceaneng.2023.113799
  26. Palau-Salvador, G., Stoesser, T., Fröhlich, J., Kappler, M., Rodi, W., “Large Eddy Simulations and Experiments of Flow Around Finite-Height Cylinders”, Flow, Turbulence and Combustion, Vol. 84, No. 2, (2009). DOI: 10.1007/s10494-009-9232-0

27     Introductory OpenFOAM® Course From 14th to 18th July, 2014. Wolf dynamics. University of Genoa, DICCA.

  1. Jones, D., Chapuis, M., Liefvendahl, M., Norrison, D. and Widjaja, R., “Rans simulations using openfoam software., (2016).
  2. Cabral, B. and Leedom, L.C., “Imaging vector fields using line integral convolution”, in Proceedings of the 20th annual conference on Computer graphics and interactive techniques, Anaheim, Association for Computing Machinery., (1993 of Conference), 263-270.
  3. Selim, T., Hesham, M. and Elkiki, M., “Effect of sediment transport on flow characteristics in non-prismatic compound channels”, Ain Shams Engineering Journal, Vol. 13, No. 6, (2022), 101771. https://doi.org/10.1016/j.asej.2022.101771.
  4. Heidarinejad, G. and Delfani, S., “Direct numerical simulation of the wake flow behind a cylinder using random vortex method in medium to high reynolds numbers”, International Journal of Engineering, Vol. 13, No. 3, (2000), 33-50.
  5. Kirkil, G. and Constantinescu, G., “Effects of cylinder reynolds number on the turbulent horseshoe vortex system and near wake of a surface-mounted circular cylinder”, Physics of Fluids, Vol. 27, No. 7, (2015), 075102. DOI: 10.1063/1.4923063.
  6. Zhang, D., Cheng, L., An, H., Zhao, M., “Direct numerical simulation of flow around a surface-mounted finite square cylinder at low Reynolds numbers”, Physics of Fluids, Vol. 29, (2017), 045101. DOI: 10.1063/1.4979479.
  7. Sumner, D., “Flow above the free end of a surface-mounted finite-height circular cylinder: A review”, Journal of Fluids and Structures, Vol. 43, (2013), 41-63. https://doi.org/10.1016/j.jfluidstructs.2013.08.007.
  8. Sau, A., Hwang, R., Sheu, T. and Yang, W., “Interaction of trailing vortices in the wake of a wall-mounted rectangular cylinder”, Physical Review E, Statistical, Nonlinear, and Soft Matter Physics, Vol. 68, (2003), 056303. DOI: 10.1103/PhysRevE.68.056303.
  9. Chen, Q., Yang, Z. and Wu, H., “Evolution of turbulent horseshoe vortex system in front of a vertical circular cylinder in open channel”, Water, Vol. 11, No. 10, (2019), 2079. DOI:10.3390/w11102079.
  10. Xu, D., Liu, J., Wu, X., “Görtler vortices and streaks in boundary layer subject to pressure gradient: excitation by free stream vortical disturbances, nonlinear evolution and secondary instability”, Journal of Fluid Mechanics, Vol. 900, (2020). DOI: 10.1017/jfm.2020.438