1.    Dzhemilev ER, Shammazov IA, Sidorkin DI, Mastobaev BN, Gumerov AK. Developing technology and device for the main pipelines repair with cutting out their defective sections. Neftyanoe Khozyaystvo. Oil Industry. 2022;2022(10):78–82. https://doi.org/10.24887/0028-2448-2022-10-78-82
2.    Bolobov VI, Popov GG. Methodology for testing pipeline steels for resistance to grooving corrosion. Journal of Mining Institute. 2021;252(6):854–60. https://doi.org/10.31897/PMI.2021.6.718:09
3.    Schipachev AM, Vardanyan ES, Mukamadeev VR, Mukamadeev IR. Investigation of changes in the surface hardness of coated cutting tools. Metalloobrabotka. 2021;3(123):22–29. https://doi.org/10.25960/mo.2021.3.22
4.    Yujra RE, Vyacheslavov AV, Gogolinskiy KV, Sapozhnikova K, Taymanov R. Deformation Monitoring Systems for Hydroturbine Head-Cover Fastening Bolts in Hydroelectric Power Plants. Sensors. 2025;25:2548. https://doi.org/10.3390/s25082548
5.    Krizskii VN, Kosarev OV, Aleksandrov PN, Luntovskaya YA. Mathematical modeling of the electric field of an in-line diagnostic probe of a cathode-polarized pipeline. Journal of Mining Institute. 2024;265:156–64.
6.    Botyan E, Lavrenko S, Pushkarev A. Evaluation of Complicated Mining Exploitation Conditions Influence on Service Life of Open Pit Trucks Suspensions with Remote Monitoring Systems. International Journal of Engineering Transactions B: Applications. 2024;37(11):2268–75. https://doi.org/10.5829/ije.2024.37.11b.12
7.    Zandinava B, Bakhtiari R, Vukelic G. Failure analysis of a gas transport pipe made of API 5L X60 steel. Engineering Failure Analysis. 2021;131:105881. https://doi.org/10.1016/j.engfailanal.2021.105881
8.    Elkhodbia M, Gadala I, Barsoum I, AlFantazi A, Abdel Wahab M. Multi-physics microstructural modeling of a carbon steel pipe failure in sour gas service. Engineering Failure Analysis. 2025;174:109469. https://doi.org/10.1016/j.engfailanal.2025.109469
9.    Li L, Yu T, Xia J, Gao Y, Han B, Gao Z. Failure analysis of L415/316L composite pipe welded joint. Engineering Failure Analysis. 2024;158:107981. https://doi.org/10.1016/j.engfailanal.2024.107981
10.    Pham TH, Kim SE. Microstructure evolution and mechanical properties changes in the weld zone of a structural steel during low-cycle fatigue studied using instrumented indentation testing. International Journal of Mechanical Sciences. 2016;114:141–56. https://doi.org/10.1016/j.ijmecsci.2016.05.021
11.    Midawi A, Simha CHM, Gerlich A. Assessment of yield strength mismatch in X80 pipeline steel welds using instrumented indentation. International Journal of Pressure Vessels and Piping. 2018;168. https://doi.org/10.1016/j.ijpvp.2018.09.014
12.    Vinogradova AA, Gogolinskiy KV, Shchiptsova EK. A study of applicability of instrumented indentation method to determine the mechanical properties of thermoplastic. Industrial laboratory. Diagnostics of materials. 2025;91(5):67–76. https://doi.org/10.26896/1028-6861-2025-91-5-67-76
13.    Purnomo E, Wiranata A, Aan D, Muflikhun M. Microstructural and Mechanical Characterization of U-Bend Economizer Failures: Integrating Experimental Testing and CFD Simulation. Journal of Materials Research and Technology. 2025;36. https://doi.org/10.1016/j.jmrt.2025.04.178
14.    Li D, Hu S, Liu X, Xie Y, Feng C. Safety Performance Assessment Strategies of P91 Steel Based on Leeb Hardness. IOP Conference Series: Earth and Environmental Science. 2019;295:032096. https://doi.org/10.1088/1755-1315/295/3/032096
15.    Seijiro M, Takashi Y. Computer Simulation of Micro Rebound Hardness Test. Procedia Engineering. 2014;81:1396–401. https://doi.org/10.1016/j.proeng.2014.10.163
16.    Gogolinskii KV, Syasko VA, Umanskii AS, Nikazov AA, Bobkova TI. Mechanical properties measurements with portable hardness testers: advantages, limitations, prospects. Journal of Physics: Conference Series. 2019;1384:012012. https://doi.org/10.1088/1742-6596/1384/1/012012
17.    Gvozdyakov DV, Zenkov AV, Gubin VE, Kaltaev AZh, Marysheva YaV. Experimental studies into the effect of air pressure on the atomization characteristics of coal-water slurries. iPolytech Journal. 2021;25(5):586–600. https://doi.org/10.52351/00260827_2021_09_81
18.    Corigliano P, Crupi V, Fricke W, Friedrich N, Guglielmino E. Experimental and numerical analysis of fillet-welded joints under low-cycle fatigue loading by means of full-field techniques. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2015;229. https://doi.org/10.1177/0954406215571462
19.    Jasim AH, Nuha H, Khanjar A. Investigation of slug catcher vessel degradation by hydrogen sulfide (H2S) damage. Heliyon. 2024;10:e40307. https://doi.org/10.1016/j.heliyon.2024.e40307
20.    Voelkel J, Meissner M, Bartsch H, Feldmann M. The influence of external weld imperfection size on the load-bearing capacity of butt-welded joints. Journal of Constructional Steel Research. 2024;220:108808. https://doi.org/10.1016/j.jcsr.2024.108808
21.    Churiaque C, Sánchez-Amaya J, Üstündag Ö, Porrua-Lara M, Gumenyuk A, Rethmeier M. Improvements of hybrid laser arc welding for shipbuilding T-joints with 2F position of 8 mm thick steel. Optics & Laser Technology. 2021;143:107284. https://doi.org/10.1016/j.optlastec.2021.107284
22.    Üstündag Ö, Bakir N, Gumenyuk A, Rethmeier M. Improvement of Charpy impact toughness by using an AC magnet backing system for laser hybrid welding of thick S690QL steels. Procedia CIRP. 2022;111:462–65. https://doi.org/10.1016/j.procir.2022.08.067
23.    Schroepfer D, Witte J, Kromm A, Kannengiesser T. Stresses in repair welding of high-strength steels—part 2: heat control and stress optimization. Welding in the World. 2024;68. https://doi.org/10.1007/s40194-024-01731-7
24.    Rhode M, Erxleben K, Richter T, Schroepfer D, Mente T, Michael T. Local mechanical properties of dissimilar metal TIG welded joints of CoCrFeMnNi high entropy alloy and AISI 304 austenitic steel. Welding in the World. 2024;68:1–11. https://doi.org/10.1007/s40194-024-01718-4
25.    Fuštar B, Lukačević I, Skejić D, Garašić I. Fatigue tests of S690 as-welded and HFMI-treated details with longitudinal and transverse attachments. Results in Engineering. 2024;23:1–8. https://doi.org/10.1016/j.rineng.2024.102386
26.    Diekhoff P, Hensel J, Nitschke-Pagel T, Dilger K. Investigation on fatigue strength of cut edges produced by various cutting methods for high-strength steels. Welding in the World. 2020;64. https://doi.org/10.1007/s40194-020-00853-y
27.    Schroeder N, Rhode M, Kannengiesser T. Thermodynamic prediction of precipitations behaviour in HAZ of a gas metal arc welded S690QL with varying Ti and Nb content. Welding in the World. 2023;67. https://doi.org/10.1007/s40194-023-01550-2
28.    Brätz O, von Arnim M, Eichler S, Gericke A, Henkel K-M, Hildebrand J, Bergmann J, Kuhlmann U. Load-carrying capacity of MAG butt and fillet welded joints on high-strength structural steels of grade S960QL and S960MC. CE/Papers. 2023;6:587–94. https://doi.org/10.1002/cepa.2478
29.    Churiaque C, Sánchez-Amaya JM, Porrúa-Lara M, Gumenyuk A, Rethmeier M. The effects of HLAW parameters for one side T-joints in 15 mm thickness naval steel. Metals. 2021;11(4):600. https://doi.org/10.3390/met11040600
30.    Pryakhin EI, Sharapova DM. Understanding the structure and properties of the heat affected zone in welds and model specimens of high-strength low-alloy steels after simulated heat cycles. CIS Iron and Steel Review. 2020;19:60–65. https://doi.org/10.17580/cisisr.2020.01.12
31.    Rahmani M, Moslemi Petrudi A. Investigation of crack growth by loading fatigue due to fluid and structural coupling vibrations in the joint of thermowell welding in gas pipeline. Journal of Research in Engineering and Applied Sciences. 2020;5(2):28–37. https://doi.org/10.46565/jreas.2020.v05i02.001
32.    Mičian M, Winczek J, Gucwa M, Koňár R, Málek M, Postawa P. Investigation of welds and heat affected zones in weld surfacing steel plates taking into account the bead sequence. Materials. 2020;13:5666. https://doi.org/10.3390/ma13245666
33.    Sizyakov MI. The use of steel arc welding pipes on tank farms or oil and gas industry objects. Petroleum Engineering. 2020;18:88–93. https://doi.org/10.17122/ngdelo-2020-2-88-93
34.    Kalimuthu V, Muthupandi V, Jayachitra R. Influence of heat treatment on the microstructure, ultrasonic attenuation and hardness of SAF 2205 duplex stainless steel. Materials Science and Engineering: A. 2011;529:447–51. https://doi.org/10.1016/j.msea.2011.09.059
35.    Mutlu I, Oktay E, Ekinci S. Characterization of microstructure of H13 tool steel using ultrasonic measurements. Russian Journal of Nondestructive Testing. 2013;49. https://doi.org/10.1134/S106183091302006X
36.    Borovkov AI, Prokhorovich VE, Bychenok VA, Berkutov IV, Alifanova IE. Ultrasonic inspection technique for welded joints obtained by spot friction stir welding. Russian Journal of Nondestructive Testing. 2023;59(2):149–60. https://doi.org/10.1134/S1061830923700262
37.    Shikhov A, Gogolinsky K, Zubarev A, Smorodinsky Ya, Kopytina D, Vinogradova A. Analysis of the requirements for metrological support of methods and means of ultrasound control. Russian Journal of Nondestructive Testing. 2025;61(3):1061–69. https://doi.org/10.1134/S1061830924603180
38.    Carreón H, Barrera G, Natividad C, Salazar M, Contreras A. Relation between hardness and ultrasonic velocity on pipeline steel welded joints. Nondestructive Testing and Evaluation. 2015;31(2):97–108. https://doi.org/10.1080/10589759.2015.1074231
39.    Bolobov VI, Latipov IU, Zhukov VS, Popov GG. Using the magnetic anisotropy method to determine hydrogenated sections of a steel pipeline. Energies. 2023;16:5585. https://doi.org/10.3390/en16155585
40.    Bychenok VA, et al. Ultrasonic testing of adhesion of special coatings. Russian Journal of Nondestructive Testing. 2023;59(8):839–46. https://doi.org/10.1134/S1061830923700481
41.    Carreon M, Ruiz A, Medina A, Barrera Cardiel G, Zárate MJ. Characterization of the alumina–zirconia ceramic system by ultrasonic velocity measurements. Materials Characterization. 2009;60:875–81. https://doi.org/10.1016/j.matchar.2009.02.008
42.    Daqing W, Yajie W, Weihua L, Chen H, Chun Y, Hao L. Multiscale investigation of microstructure optimization in the arc additive manufacturing and arc welding by self-induced ultrasound. International Journal of Heat and Mass Transfer. 2021;180:121790. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121790
43.    Cécile G, Jean M, Marie-Aude P, Gilles C, Bertrand C. Influence of the uncertainty of elastic constants on the modelling of ultrasound propagation through multi-pass austenitic welds. Impact on non-destructive testing. International Journal of Pressure Vessels and Piping. 2019;171:125–36. https://doi.org/10.1016/j.ijpvp.2019.02.011
44.    Fischer-Cripps AC. Introduction to contact mechanics. 2nd ed. US: Springer; 2007. p. 226.
45.    Oliver W, Pharr G. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research. 1992;7(6):1564–83. https://doi.org/10.1557/JMR.1992.1564
46.    Bharare OS, Sarve SA, Gengane VV, Sahane AS, Jikar PC. Effect of various surface heat treatment methods and its parametric variation on the hardness properties of different steels grades. Materials Today: Proceedings. 2024;102:132–39. https://doi.org/10.1016/j.matpr.2023.04.057
47.    Anggraini L, Kartomi H. Hot forgeability of SCr420 low-alloy steel for piston rod application. In: Journal of Physics: Conference Series. 2020;1595(1):012007. https://doi.org/10.1088/1742-6596/1595/1/012007
48.    Wangyu L, Dongxun L, Weigui X. A novel time-of-flight difference determination method for ultrasonic thickness measurement with ultrasonic echo onset point detection. Applied Acoustics. 2025;233:110605. https://doi.org/10.1016/j.apacoust.2025.110605
49.    Peng Z, Shijie W, Pan D, Xinru G, Tonghai W, Min Y, Yaguo L. High-accuracy ultrasonic measurement of oil film thickness in sliding bearings considering surface thin coating. Tribology International. 2025;110343. https://doi.org/10.1016/j.triboint.2024.110343
50.    Pan D, Laisheng Z, Tonghai W, Min Y, Tom R, Zhongxiao P. Simultaneous measurement of thickness and sound velocity of porous coatings based on the ultrasonic complex reflection coefficient. NDT & E International. 2022;131:102683. https://doi.org/10.1016/j.ndteint.2022.102683
51.    Hao C, Kaipeng J, Wei Z, Chengqian Z, Jianzhong F, Peng Z. High precision ultrasonic measurement method for thin-walled parts. NDT & E International. 2024;145:103122. https://doi.org/10.1016/j.ndteint.2024.103122
52.    Morana M, Damir M, Biserka R, Zdenka K. Measurement uncertainty evaluation of ultrasonic wall thickness measurement. Measurement. 2019;137:179–88. https://doi.org/10.1016/j.measurement.2019.01.027
53.    Marcelo YM, Nicolás P, Flávio B, Julio CA, Marcos SGT. Error analysis of self-compensated ultrasound measurements of the thickness loss due to corrosion in pipe walls. Ultrasonics. 2024;142:107387. https://doi.org/10.1016/j.ultras.2024.107387