International Journal of Engineering

Articles in Press: ALL Accepted Manuscript Corrected Proof

Numerical Solution of Fence Performance for Reduction of Sand Deposition on Railway Tracks

Volume 29, Issue 7, July 2016, Pages 1014-1021

Peyaman Razi; arash Mirabdolah lavasani; ramin mehdipour

Enhancement of the Shear-flexural Strength of the Rubberized Concrete Prism Beam by External Reinforcement

Volume 35, Issue 5, May 2022, Pages 1017-1023

T. J. Mohammed; K. M. Breesem

Experimental and Numerical Investigation of Air Temperature Distribution inside a Car under Solar Load Condition

Volume 32, Issue 7, July 2019, Pages 1031-1039

B. Srusti; M. B. Shyam Kumar

Analysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE)

Volume 30, Issue 7, July 2017, Pages 1074-1080

I. S. N. V. R. Prasanth; D. V. Ravishankar; M. Manzoor Hussain

Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method

Volume 28, Issue 7, July 2015, Pages 1099-1107

MANIVANNAN A; KARTHIKEYAN R; SHENBAGA VINAYAGA MOORTHI N; Venkatesan M; V.C. SATHISH GANDHI

Ovality and Bow Defect of Pre-punched Sheets in Roll Forming of Trapezoidal Sections

Volume 31, Issue 7, July 2018, Pages 1123-1128

M Safari; J Joudaki

Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube

Volume 27, Issue 7, July 2014, Pages 1149-1154

Alireza Hajipour; Ehsan Shojaeezadeh; S. Kobra Asadi Yousef-abad; Koorosh Goudarzi

Oscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE)

Volume 29, Issue 8, August 2016, Pages 1167-1174

Behrooz Attaran; Milad Zarchi

Isothermal Redox Kinetics of Co3O4-Fe2O3 Nano-Composite as a Thermochemical Heat Storage Material

Volume 32, Issue 8, August 2019, Pages 1200-1209

Nariman Nekokar; Mehdi Pourabdoli

H∞ Robust Controller Design and Experimental Analysis of Active Magnetic Bearings with Flexible Rotor System

Volume 28, Issue 8, August 2015, Pages 1233-1240

changsheng Zhu; Zhixian Zhong

Robot Arm Performing Writing through Speech Recognition Using Dynamic Time Warping Algorithm

Volume 30, Issue 8, August 2017, Pages 1238-1245

V. Manoj Kumar; D. Srii Hari Thipesh

A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System

Volume 34, Issue 5, May 2021, Pages 1239-1249

H. Abdolrahimi; D. Arab Khaburi

Application of Wavelet Neural Network in Forward Kinematics Solution of 6-RSU Co-axial Parallel Mechanism Based on Final Prediction Error

Volume 31, Issue 8, August 2018, Pages 1283-1291

A Rahmani

A Bi-level Meta-heuristic Approach for a Hazardous Waste Management Problem

Volume 33, Issue 7, July 2020, Pages 1304-1310

Z. Saeidi-Mobarakeh; R. Tavakkoli-Moghaddam; M. Navabakhsh; H. Amoozad-Khalili

Experimental and Numerical Studies on the Characteristics of Simple and Multi-cell Shapes of Quasi-hemisphere Thin-walled Structures

Volume 27, Issue 8, August 2014, Pages 1307-1316

Masoud Parsapour

Prediction and Optimization of Mechanical Properties of St52 in Gas Metal Arc Weld Using Response Surface Methodology and ANOVA

Volume 29, Issue 9, September 2016, Pages 1307-1313

Gohar Ranjbari; Ali Doniavi

Investigation on Tensile Strength of Friction Stir Welded Joints in PP/EPDM/Clay Nanocomposites

Volume 28, Issue 9, September 2015, Pages 1382-1391

mohammadreza nakhaei; Nasrollah Bani Mostafa Arab; gholam rezaei

Comparison of Properties of Ti/TiN/TiCN/TiAlN Film Deposited by Cathodic Arc Physical Vapor and Plasma-assisted Chemical Vapor Deposition on Custom 450 Steel Substrates

Volume 29, Issue 10, October 2016, Pages 1459-1468

Esmaeil Poursaeidi; Akbar Salarvand

Young s Modulus of Single and Double Walled Carbon Nanocones Using Finite Element Method(TECHNICAL NOTE)

Volume 27, Issue 9, September 2014, Pages 1467-1474

Abdolhosein fereidoon; Mostafa Mohammadian

Thermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam (TECHNICAL NOTE)

Volume 32, Issue 10, October 2019, Pages 1480-1484

Bahman Meyghani; Mokhtar Awang; ChuanSong Wu

A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites

Volume 34, Issue 6, June 2021, Pages 1512-1522

P. Gholami; Mohammad Ali Kouchakzadeh; M. A. Farsi

Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE)

Volume 28, Issue 10, October 2015, Pages 1525-1532

Hossein Golbakhshi; Moslem Namjoo; Farhad Khoshnam

Techno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms

Volume 30, Issue 10, October 2017, Pages 1555-1564

A. Kumar; A. Biswas

The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux

Volume 33, Issue 8, August 2020, Pages 1590-1597

K. DolatiAsl; Y. Bakhshan; E. Abedini; S. Niazi

Investigating the Effects of Cold Bulge Forming Speed on Thickness Variation and Mechanical Properties of Aluminum Alloys: Experimental and Numerical

Volume 31, Issue 9, September 2018, Pages 1602-1608

S. M. R Tabatabaei; K. Alasvand Zarasvand

Journal Archive

Volume 37 (2024)

Volume 36 (2023)

Volume 35 (2022)

Volume 34 (2021)

Volume 33 (2020)

Volume 32 (2019)

Volume 31 (2018)

Volume 30 (2017)

Volume 29 (2016)

Volume 28 (2015)

Volume 27 (2014)

Volume 26 (2013)

Volume 25 (2012)

Volume 24 (2011)

Volume 23 (2010)

Volume 22 (2009)

Volume 21 (2008)

Volume 20 (2007)

Volume 19 (2006)

Volume 18 (2005)

Volume 17 (2004)

Volume 16 (2003)

Volume 15 (2002)

Volume 14 (2001)

Volume 13 (2000)

Volume 12 (1999)

Volume 11 (1998)

Volume 10 (1997)

Volume 9 (1996)

Volume 8 (1995)

Volume 7 (1994)

Volume 6 (1993)

Volume 5 (1992)

Volume 4 (1991)

Volume 3 (1990)

Volume 2 (1989)

Volume 1 (1988)