1. Kashani, H., Ito, Y., Han, J., Liu, P., and Chen, M. “Extraordinary tensile strength and ductility of scalable nanoporous graphene.” Science Advances, Vol. 5, No. 2, (2019). https://doi.org/10.1126/sciadv.aat6951
2. Hassanpour, M., Shafigh, P., and Mahmud, H. Bin. “Lightweight aggregate concrete fiber reinforcement - A review.” Construction and Building Materials. Vol. 38, (2012), 452-461. https://doi.org/10.1016/j.conbuildmat.2012.07.071
3. Ting, T. Z. H., Rahman, M. E., Lau, H. H., and Ting, M. Z. Y. “Recent development and perspective of lightweight aggregates based self-compacting concrete.” Construction and Building Materials. Vol. 201, (2019), 763-777. https://doi.org/10.1016/j.conbuildmat.2018.12.128
4. Ehsani Yeganeh, A., Kouroshnezhad, F., Dadsetan, S., Hossain, K. M. A., and Lachemi, M. “Experimental Investigation on Mechanical Properties of Fiber Reinforced Lightweight Self-consolidating Concrete.” In RILEMBookseries (Vol. 23, pp. 536–543). Springer Netherlands. https://doi.org/10.1007/978-3-030-22566-7_62
5. Hilal, N. N., Sahab, M. F., and Mohammed Ali, T. K. “Fresh and hardened properties of lightweight self-compacting concrete containing walnut shells as coarse aggregate.” Journal of King Saud University - Engineering Sciences, (2020). https://doi.org/10.1016/j.jksues.2020.01.002
6. Mohsenzadeh, S., Maleki, A., and Lotfollahi-Yaghin, M. A. “Experimental and Numerical Study of Energy Absorption Capacity of Glass Reinforced SCC Beams.” International Journal of Engineering, Transactions C: Aspects, Vol. 32, No. 12, (2019), 1733–1744. https://doi.org/10.5829/ije.2019.32.12c.06
7. Badogiannis, E. G., Christidis, I., and Tzanetatos, G. E. “Evaluation of the mechanical behavior of pumice lightweight concrete reinforced with steel and polypropylene fibers.” Construction and Building Materials, Vol. 196, (2019), 443–456. https://doi.org/10.1016/j.conbuildmat.2018.11.109
8. Wu, T., Yang, X., Wei, H., and Liu, X. “Mechanical properties and microstructure of lightweight aggregate concrete with and without fibers.” Construction and Building Materials, Vol. 199, (2019), 526–539. https://doi.org/10.1016/j.conbuildmat.2018.12.037
9. Senff, L., Labrincha, J. A., Ferreira, V. M., Hotza, D., and Repette, W. L. “Effect of nano-silica on rheology and fresh properties of cement pastes and mortars.” Construction and Building Materials, Vol. 23, No. 7, (2009), 2487–2491. https://doi.org/10.1016/j.conbuildmat.2009.02.005
10. Afzali Naniz, O., and Mazloom, M. “Effects of colloidal nano-silica on fresh and hardened properties of self-compacting lightweight concrete.” Journal of Building Engineering, Vol. 20, , (2018), 400–410. https://doi.org/10.1016/j.jobe.2018.08.014
11. Mohammed, B. S., Liew, M. S., Alaloul, W. S., Khed, V. C., Hoong, C. Y., and Adamu, M. “Properties of nano-silica modified pervious concrete.” Case Studies in Construction Materials, Vol. 8, , (2018), 409–422. https://doi.org/10.1016/j.cscm.2018.03.009
12. Abd Elrahman, M., Chung, S. Y., Sikora, P., Rucinska, T., and Stephan, D. “Influence of nanosilica on mechanical properties, sorptivity, and microstructure of lightweight concrete.” Materials, Vol. 12, No. 19, (2019). https://doi.org/10.3390/ma12193078
13. Kanthe, V., Deo, S., and Murmu, M. “Combine Use of Fly Ash and Rice Husk Ash in Concrete to Improve its Properties.” International Journal of Engineering, Transactions A: Basics, Vol. 31, No. 7, (2018), 1012–1019. https://doi.org/10.5829/ije.2018.31.07a.02
14. Hashemi, S. H., and Mirzaeimoghadam, I. “Influence of Nano-silica and Polypropylene Fibers on Bond Strength of Reinforcement and Structural Lightweight Concrete.” International Journal of Engineering, Transactions B: Applications, Vol. 27, No. 2, (2014), 261–268. https://doi.org/10.5829/idosi.ije.2014.27.02b.10
15. Shen, D., Jiao, Y., Kang, J., Feng, Z., and Shen, Y. “Influence of ground granulated blast furnace slag on early-age cracking potential of internally cured high performance concrete.” Construction and Building Materials, Vol. 233, (2020), 117083. https://doi.org/10.1016/j.conbuildmat.2019.117083
16. Zaroudi, M., Madandoust, R., and Aghaee, K. “Fresh and hardened properties of an eco-friendly fiber reinforced self-consolidated concrete composed of polyolefin fiber and natural zeolite.” Construction and Building Materials, Vol. 241, (2020), 118064. https://doi.org/10.1016/j.conbuildmat.2020.118064
17. Sadeghi-Nik, A., Berenjian, J., Alimohammadi, S., Lotfi-Omran, O., Sadeghi-Nik, A., and Karimaei, M. “The Effect of Recycled Concrete Aggregates and Metakaolin on the Mechanical Properties of Self-Compacting Concrete Containing Nanoparticles.” Iranian Journal of Science and Technology - Transactions of Civil Engineering, Vol. 43, No. 1, (2019), 503–515. https://doi.org/10.1007/s40996-018-0182-4
18. Mehrinejad Khotbehsara, M., Mohseni, E., Ozbakkaloglu, T., and Ranjbar, M. M. “Durability Characteristics of Self-Compacting Concrete Incorporating Pumice and Metakaolin.” Journal of Materials in Civil Engineering, Vol. 29, No. 11, (2017), 04017218. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002068
19. Najimi, M., Sobhani, J., Ahmadi, B., and Shekarchi, M. “An experimental study on durability properties of concrete containing zeolite as a highly reactive natural pozzolan.” Construction and Building Materials, Vol. 35, (2012), 1023–1033. https://doi.org/10.1016/j.conbuildmat.2012.04.038
20. ASTM C136 / C136M-19, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA, (2019).
21. ASTM C330 / C330M-17a, Standard Specification for Lightweight Aggregates for Structural Concrete, ASTM International, West Conshohocken, PA, (2017).
22. ASTM C311 / C311M-18, Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete, ASTM International, West Conshohocken, PA, (2018).
23. ASTM C494 / C494M-17, Standard Specification for Chemical Admixtures for Concrete, ASTM International, West Conshohocken, PA, (2017).
24. ACI Committee 211, American Concrete Institute, Farmington Hills, Michigan, (1991).
25. Self-Compacting Concrete European Project Group, The European guidelines for self-compacting concrete: Specification, production and use. International Bureau for Precast Concrete (BIBM), (2005).
26. ASTM C39 / C39M-18, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, (2018).
27. ASTM C496 / C496M-17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, (2017).
28. ASTM C293 / C293M-16, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading), ASTM International, West Conshohocken, PA, (2016).
29. ASTM C597-09, Standard Test Method for Pulse Velocity Through Concrete, ASTM International, West Conshohocken, PA, (2009).
30. Vasconcelos, G., Lourenço, P. B., Alves, C. A. S., and Pamplona, J. “Ultrasonic evaluation of the physical and mechanical properties of granites.” Ultrasonics, Vol. 48, No. 5, (2008), 453–466. https://doi.org/10.1016/j.ultras.2008.03.008
31. Lafhaj, Z., Goueygou, M., Djerbi, A., and Kaczmarek, M. “Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water / cement ratio and water content.” Cement and Concrete Research, Vol. 36, No. 4, (2006), 625–633. https://doi.org/10.1016/j.cemconres.2005.11.009
32. ASTM C642-13, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International, West Conshohocken, PA, (2013).
33. Sengul, O., and Gjorv, O. E. “Electrical Resistivity Measurements for Quality Control During Concrete Construction.” ACI Materials Journal, Vol. 106, No. 6, (2008), 541–547. Retrieved from https://trid.trb.org/view/876465
34. Song, H. W., and Saraswathy, V. “Corrosion Monitoring of Reinforced Concrete Structures - A Review .” International Journal of Electrochemical Science, Vol. 2, (2007), 1–28. Retrieved from http://cecri.csircentral.net/683/
35. Elkey, W., and Sellevold, E. “Electrical Resistivity of Concrete”, Publication No. 80, Norwegian Road Research Laboratory, Oslo, Norway, (1995).
36. AL-Ameeri, A. “The Effect of Steel Fiber on Some Mechanical Properties of Self Compacting Concrete.” American Journal of Civil Engineering, Vol. 1, No. 3, (2013), 110. https://doi.org/10.11648/j.ajce.20130103.14
37. Sivakumar, V. R., Kavitha, O. R., Prince Arulraj, G., and Srisanthi, V. G. “An experimental study on combined effects of glass fiber and Metakaolin on the rheological, mechanical, and durability properties of self-compacting concrete.” Applied Clay Science, Vol. 147, (2017), 123–127. https://doi.org/10.1016/j.clay.2017.07.015
38. Taheri Fard, A. R., Soheili, H., Ramzani Movafagh, S., and Farnood Ahmadi, P. “Combined effect of glass fiber and polypropylene fiber on mechanical properties of self-compacting concrete.” Magazine of Civil Engineering, Vol. 62, No. 2, (2016), 26–31. https://doi.org/10.5862/MCE.62.3
39. Persson, B. “A comparison between mechanical properties of self-compacting concrete and the corresponding properties of normal concrete.” Cement and Concrete Research, Vol. 31, No. 2, (2001), 193–198. https://doi.org/10.1016/S0008-8846(00)00497-X
40. ACI 213R-03, Guide for Structural Lightweight-aggregate Concrete. ACI 213R-03, American Concrete Institute, Farmington Hills, MI. (2003).
41. De Schutter, G., Bartos, P. J., Domone, P., and Gibbs, J. Self-Compacting Concrete. Whittles Publishing, Dunbeath, Caithness Scotland. Retrieved from https://trid.trb.org/view/863702
42. Arefi, M., Javeri, M., and Mollaahmadi, E. “To study the effect of adding Al2O3 nanoparticles on the mechanical properties and microstructure of cement mortar.” Life Science Journal, Vol. 8, No. 4, (2011), 613–617. Retrieved from https://www.academia.edu/download/30702744/082_7488life0804_613_617.pdf
43. Nazari, A., Riahi, S., Riahi, S., Fatemeh Shamekhi, S., and Khademno, A. “Influence of Al2O3 nanoparticles on the compressive strength and workability of blended concrete .” Journal of American Science, Vol. 6, No. 5, (2010), 6–9. Retrieved from http://firstname.lastname@example.org
44. Faez, A., Sayari, A., and Manie, S. “Mechanical and Rheological Properties of Self-Compacting Concrete Containing Al2O3 Nanoparticles and Silica Fume.” Iranian Journal of Science and Technology - Transactions of Civil Engineering, (2020), 1–11. https://doi.org/10.1007/s40996-019-00339-y
45. Mukharjee, B. B., and Barai, S. V. “Influence of Nano-Silica on the properties of recycled aggregate concrete.” Construction and Building Materials, Vol. 55, (2014), 29–37. https://doi.org/10.1016/j.conbuildmat.2014.01.003
46. ACI Committee 318. Building Code Requirements for Structural Concrete (ACI318-95) and Commentary (ACI 318-R95). American Concrete Institute, Farmington Hills, Mich., (1995).
47. European Committee for Standardisation (CEN). European (draft) Standard EN 1992-1- 1: Eurocode 2; Design of concrete structures, Part 1-1: General rules and rules for buildings. Brussels, (2004).
48. Berge, O. “Reinforced structures in lightweight concrete.” PhD Thesis, Stockholm, (1973).
49. Bogas, J. A., and Nogueira, R. “Tensile strength of structural expanded clay lightweight concrete subjected to different curing conditions.” KSCE Journal of Civil Engineering, Vol. 18, No. 6, (2014), 1780–1791. https://doi.org/10.1007/s12205-014-0061-x
50. ACI Committee 363, State-of-the-art report on high-strength concrete (ACI 363R-92), American Concrete Institute, Farmington Hills, Michigan, 55. (1992).
51. ACI 318-99, Building Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Michigan, 393, (1999).
52. Whitehurst, E. A. “Evaluation of Concrete Properties from Sonic Tests.” American Concrete Institute Monograph, Vol. 326, , (2006), 16–21. Retrieved from https://ci.nii.ac.jp/naid/10018411018
53. CEB-FIP. Diagnosis and assessment of concrete, structures-state of art report, CEB Bulletin 83. (1989).
54. Agarkar, S., and Joshi, M. “Study of effect of Al2O3 nanoparticles on the compressive strength and workability of blended concrete.” International Journal of Current Research, Vol. 4, No. 12, (2012), 382–384.