Author Index

A

  • Abbasnejad, B. Stabilization of Electrostatically Actuated Micro-pipe Conveying Fluid Using Parametric Excitation [Volume 30, Issue 12, 2017, Pages 1911-1918]
  • Abdollahi, M. Reconstitution of Sand Specimens Using a Rainer System [Volume 30, Issue 10, 2017, Pages 1451-1463]
  • Abdollahi, Seyed Mohammad Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE) [Volume 30, Issue 2, 2017, Pages 162-171]
  • Abdollah-zadeh, A. Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
  • Abdollahzadeh Sharghi, E. The Influence of Short Values of Hydraulic and Sludge Retention Time on Performance of a Membrane Bioreactor Treating Sunflower Oil Refinery Wastewater [Volume 30, Issue 10, 2017, Pages 1417-1424]
  • Abdul Halim, A. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Abdul Kadir, A. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Abdul Latiff, Ab A. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Abedi Pahnekollaei, S. M. Optimal Design of a Brushless DC Motor, by Cuckoo Optimization Algorithm (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 668-677]
  • Abessi, O. Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
  • Abolfazlzadeh, M. Statistical Analysis of the Railway Accidents Causes in Iran (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1822-1830]
  • Abooie, M. H. Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]
  • Abouabdellah, A. Identification of the Patient Requirements Using Lean Six Sigma and Data Mining [Volume 30, Issue 5, 2017, Pages 691-699]
  • Aftabi Sani, Ahmad Free Vibration Analysis of a Six-degree-of-freedom Mass-spring System Suitable for Dynamic Vibration Absorbing of Space Frames [Volume 30, Issue 1, 2017, Pages 30-39]
  • Aghajanzadeh, Omid An Investigation on the Effects of Gas Pressure Drop in Heat Exchangers on Dynamics of a Free Piston Stirling Engine [Volume 30, Issue 2, 2017, Pages 294-302]
  • Ahmadi, I. Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
  • Ahmadian, M. T. Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
  • Ahmaditabar, K. Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
  • Ahmed, Mohammed Altaf Embedded Memory Test Strategies and Repair [Volume 30, Issue 6, 2017, Pages 839-845]
  • Akbar Ghafouri Rokn Abadi, Ali Constrained Model Predictive Control of Low-power Industrial Gas Turbine [Volume 30, Issue 2, 2017, Pages 207-214]
  • Akbari, Gholamhosein Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering [Volume 30, Issue 2, 2017, Pages 288-293]
  • Akbarzadeh, F. A Modfied Self-organizing Map Neural Network to Recognize Multi-font Printed Persian Numerals (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1700-1706]
  • Akhondizadeh, M. Experimental Determination of the Optimum Ball Impacts for Solution of Silo Obstruction (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1215-1222]
  • Alaei, Reza Selecting Efficient Service-providers in Electric Power Distribution Industry Using Combinatorial Reverse Auction [Volume 30, Issue 9, 2017, Pages 1342-1351]
  • Alagappan, N. Performance Investigation of 405 Stainless Steel Thermosyphon using Cerium (IV) Oxide Nano Fluid [Volume 30, Issue 4, 2017, Pages 575-581]
  • Alam, M. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Alavi, A. Stiffness-based Approach for Preliminary Design of Framed Tube Structures [Volume 30, Issue 11, 2017, Pages 1664-1672]
  • Aliakbari Nouri, F. Providing a Fuzzy Expert System to Assess the Maturity Level of Companies in Manufacturing Excellence in the Food Industry of Iran [Volume 30, Issue 4, 2017, Pages 532-542]
  • Alimirzaloo, Vali Investigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050 [Volume 30, Issue 6, 2017, Pages 920-925]
  • AMGHAR, Mustapha Risk Analysis of Operating Room Using the Fuzzy Bayesian Network Model [Volume 30, Issue 1, 2017, Pages 66-74]
  • Amin Naseri, M.R. A Game Theoretic Approach for Sustainable Power Systems Planning in Transition [Volume 30, Issue 3, 2017, Pages 393-402]
  • Amiri, A. The Effect of Measurement Errors on the Performance of Variable Sample Size and Sampling Interval Control Chart [Volume 30, Issue 7, 2017, Pages 995-1004]
  • Amiri, Amirhossein Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
  • Amirinejhad, M. K. Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 814-820]
  • Ardeshir, Gholamreza Improving Linearity of CMOS Variable-gain Amplifier Using Third-order Intermodulation Cancellation Mechanism and Intermodulation Distortion Sinking Techniques [Volume 30, Issue 2, 2017, Pages 192-198]
  • Ariz, M. Thermal Performance of Jet Impingement with Spent Flow Management [Volume 30, Issue 10, 2017, Pages 1599-1608]
  • Arora, V. K. Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model [Volume 30, Issue 4, 2017, Pages 479-485]
  • Asadi Amiri, S. Image Enhancement Using an Adaptive Un-sharp Masking Method Considering the Gradient Variation [Volume 30, Issue 8, 2017, Pages 1118-1125]
  • Asadi Saeed Abad, F. An Architecture for Security and Protection of Big Data [Volume 30, Issue 10, 2017, Pages 1479-1486]
  • Asgari, M. Investigating The Seismic Response of Structural Walls Using Nonlinear Static and Incremental Dynamic Analyses [Volume 30, Issue 11, 2017, Pages 1691-1699]
  • Ashoka Reddy, K. Empirical Mode Decomposition based Adaptive Filtering for Orthogonal Frequency Division Multiplexing Channel Estimation [Volume 30, Issue 10, 2017, Pages 1517-1525]
  • Ashraf Talesh, Seyed Siamak A Dimensionless Parameter Approach based on Singular Value Decomposition and Evolutionary Algorithm for Prediction of Carbamazepine Particles Size [Volume 30, Issue 3, 2017, Pages 330-337]
  • Askari Lasaki, Salar Oil Reservoirs Classification Using Fuzzy Clustering (RESEARCH NOTE) [Volume 30, Issue 9, 2017, Pages 1391-1400]
  • Atashnezhad, A. Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
  • Attaran, Behrooz Numerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions [Volume 30, Issue 6, 2017, Pages 887-894]
  • Awang, H. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Azadi, M. Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
  • Azadi, M. Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
  • Azadnia, A. H. An Adaptive Fuzzy Neural Network Model for Bankruptcy Prediction of Listed Companies on the Tehran Stock Exchange [Volume 30, Issue 12, 2017, Pages 1879-1884]
  • Azizi, K. Computational Fluid Dynamic- Two Fluid Model Study of Gas-Solid Heat Transfer in a Riser with Various Inclination Angles [Volume 30, Issue 4, 2017, Pages 464-472]
  • Azizollah Ganji, B. The Effect of Material Properties on Sensitivity of the Microelectromechanical Systems Piezoelectric Hydrophone [Volume 30, Issue 12, 2017, Pages 1848-1855]
  • Azizollah Ganji, bahram Simulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm [Volume 30, Issue 6, 2017, Pages 846-850]
  • Azizuddin, Md. Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant [Volume 30, Issue 4, 2017, Pages 558-566]

B

  • Babazadeh, Saeedeh Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
  • Badal, T. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
  • Badjian, Hamed Multi-objective Optimization of Stirling Heat Engine Using Gray Wolf Optimization Algorithm (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 895-903]
  • Bagheri, Reza Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 93-100]
  • Bagheripour, Ehsan Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
  • Bagheripour, Ehsan Incorporated Poly Acrylic Acid-co-Fe3O4 Nanoparticles Mixed Matrix Polyethersulfone based Nanofiltration Membrane in Desalination Process [Volume 30, Issue 6, 2017, Pages 821-829]
  • Baharom, A. Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
  • Bahrami, N. Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
  • Bai, L. Single Image Dehazing Algorithm Based on Dark Channel Prior and Inverse Image [Volume 30, Issue 10, 2017, Pages 1471-1478]
  • Bakhshan, Y. Estimating Solar Radiation and Developing Iran’s Atlas Map of Optimum Monthly Tilt Angle (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1197-1204]
  • Bakhshi Khaniki, Hossein Free Vibration Analysis of Nonuniform Microbeams Based on Modified Couple Stress Theory: an Analytical Solution [Volume 30, Issue 2, 2017, Pages 311-320]
  • Balogun, Vincent A. Optimum Swept Angle Estimation based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy [Volume 30, Issue 4, 2017, Pages 591-596]
  • Baniamerian, Z. A New Approach in Developing Optimal Defrost/Demist Performance in a Passenger Car (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1081-1089]
  • Bao, LP. Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]
  • Barforoushi, T. Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
  • Bargegol, I. Relationship between Pedestrians’ Speed, Density and Flow Rate of Crossings through Urban Intersections (Case Study: Rasht Metropolis) (RESEARCH NOTE) [Volume 30, Issue 12, 2017, Pages 1814-1821]
  • Bargegol, I. Statistical Analysis of the Railway Accidents Causes in Iran (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1822-1830]
  • Barzegar-Mohammadi, M. A New Mathematical Model To Optimize A Green Gas Network: A Case Study [Volume 30, Issue 7, 2017, Pages 1029-1037]
  • Bashiri, Mahdi Bi-objectives Approach for a Multi-period Two Echelons Perishable Product Inventory-routing Problem with Production and Lateral Transshipment [Volume 30, Issue 6, 2017, Pages 876-886]
  • Basirat, R. The Investigation of Subsidence Effect on Buried Pipes in 3D Space [Volume 30, Issue 8, 2017, Pages 1182-1189]
  • Bayati, Nasrin Pattern Recognition in Control Chart Using Neural Network based on a New Statistical Feature [Volume 30, Issue 9, 2017, Pages 1372-1380]
  • Bazoobandi, H. Wavelet Neural Network with Random Wavelet Function Parameters [Volume 30, Issue 10, 2017, Pages 1510-1516]
  • Beatrice Seventline, J. Estimation of Roughness Parameters of A Surface Using Different Image Enhancement Techniques (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 652-658]
  • Beheshti, H. Performance Enhancement and Environmental Impact Analysis of a Solar Chimney Power Plant: Twenty-four-hour Simulation in Climate Condition of Isfahan Province, Iran [Volume 30, Issue 8, 2017, Pages 1260-1269]
  • Behfar, R. Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
  • Behnamfar, F. Soft Soil Seismic Design Spectra Including Soil-structure Interaction [Volume 30, Issue 10, 2017, Pages 1443-1450]
  • Benbouziyane, J. Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
  • Benchatti, A. Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
  • Bhaskara Rao, J. Estimation of Roughness Parameters of A Surface Using Different Image Enhancement Techniques (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 652-658]
  • Bin Ibne Reaz, M. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
  • Binti Mohd Hanib, N. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
  • Biswas, A. Techno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms [Volume 30, Issue 10, 2017, Pages 1555-1564]
  • Bohlooli, A. Neural Network Based Protection of Software Defined Network Controller against Distributed Denial of Service Attacks [Volume 30, Issue 11, 2017, Pages 1714-1722]
  • Bolouri Bazaz, J. Reconstitution of Sand Specimens Using a Rainer System [Volume 30, Issue 10, 2017, Pages 1451-1463]
  • Bonora, N A Strain Range Dependent Cyclic Plasticity Model [Volume 30, Issue 2, 2017, Pages 321-329]
  • Borjini, M. N. Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
  • Borzouyi Kutenayi, S. The Effect of Caspian Sea Water on Corrosion Resistance and Compressive Strength of Reinforced Concrete Containing Different SiO2 Pozzolan [Volume 30, Issue 10, 2017, Pages 1464-1470]
  • Bozorgi, A. A Bi-objective Stochastic Optimization Model for Humanitarian Relief Chain by Using Evolutionary Algorithms [Volume 30, Issue 10, 2017, Pages 1526-1537]
  • Bozorgi-Amiri, A. Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
  • Brahimi, M. Probabilistic Approach to the Seismic Vulnerability of RC Frame Structures by the Development of Analytical Fragility Curves [Volume 30, Issue 7, 2017, Pages 945-954]
  • B. Speily, O. R. Energy Aware Resource Management of Cloud Data Centers [Volume 30, Issue 11, 2017, Pages 1730-1739]

C

  • C, Angel Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 127-133]
  • Chandramohan, Sujatha Performance Evaluation of Magnetorheological Damper Valve Configurations Using Finite Element Method [Volume 30, Issue 2, 2017, Pages 303-310]
  • Chen, G. Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
  • Chen, Jian Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
  • Cheng, T. Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
  • Cheraghalipour, A. An Integrated Approach for Collection Center Selection in Reverse Logistics [Volume 30, Issue 7, 2017, Pages 1005-1016]
  • Choong, F. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]

D

  • Dabaghi, E. Feature Dimension Reduction of Multisensor Data Fusion using Principal Component Fuzzy Analysis [Volume 30, Issue 4, 2017, Pages 493-499]
  • Dadban Shahamat, Y. Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
  • Daghighi, S. Optimum Design of a Coir Fiber Biocomposite Tube Reinforced with Nano Silica and Nano Clay Powder [Volume 30, Issue 12, 2017, Pages 1894-1902]
  • Danesh-Manesh, H. Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
  • Daryadel, Mahsa Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
  • Daud, Z. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Davarnejad, R. Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
  • Davarpanah, L. The Influence of Short Values of Hydraulic and Sludge Retention Time on Performance of a Membrane Bioreactor Treating Sunflower Oil Refinery Wastewater [Volume 30, Issue 10, 2017, Pages 1417-1424]
  • Dehghan Manshadi, Mojtaba Parametric Study of Movement Path in Two-dimensional Wing Flow Separation: Experimental Investigation [Volume 30, Issue 9, 2017, Pages 1401-1407]
  • Dehzangi, A. Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
  • Deng, S. Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
  • Dengqiu, Ma Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
  • Deo, S. Durable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials [Volume 30, Issue 7, 2017, Pages 964-971]
  • DolatiAsl, K. Estimating Solar Radiation and Developing Iran’s Atlas Map of Optimum Monthly Tilt Angle (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1197-1204]
  • Doniavi, Ali Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
  • Doost Mohammadi, mohammad hossein Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 57-65]
  • Dorfeshan, Y. Solving Critical Path Problem in Project Network by a New Enhanced Multi-objective Optimization of Simple Ratio Analysis Approach with Interval Type-2 Fuzzy Sets [Volume 30, Issue 9, 2017, Pages 1352-1361]
  • Doroudyan, Mohammad Hadi Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
  • Dvoynikov, M. Designing a High Resistant, High-torque Downhole Drilling Motor (RESEARCH NOTE) [Volume 30, Issue 10, 2017, Pages 1615-1621]
  • Dyamannavr, Neelappa Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 127-133]
  • Dzyura, V. O. Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]

E

  • Ebrahimi, Afshin Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
  • Ebrahimnezhad, P. Survival of Lactobacillus Acidophilus as Probiotic Bacteria using Chitosan Nanoparticles [Volume 30, Issue 4, 2017, Pages 456-463]
  • Ebrahimnezhad, S. A New Extended Analytical Hierarchy Process Technique with Incomplete Interval-valued Information for Risk Assessment in IT Outsourcing [Volume 30, Issue 5, 2017, Pages 739-748]
  • Edem, Isuamfon F. Optimum Swept Angle Estimation based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy [Volume 30, Issue 4, 2017, Pages 591-596]
  • Eftekhari, Mojtaba The Effect of Damping and Stiffness of Bearing on the Natural Frequencies of Rotor-bearing System [Volume 30, Issue 3, 2017, Pages 448-455]
  • Elkhazen, M. I. Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
  • Emin Erdin, M. Effect of Coating Materials on Wear in Internal Gears [Volume 30, Issue 11, 2017, Pages 1792-1799]
  • Esfahanian, M. Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
  • Eshtehardian, E. Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
  • Esmaelzadeh, Reza Differential Flatness Method Based on Pre-set Guidance and Control Subsystem Design for a Surface to Surface Flying Vehicle (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 912-919]
  • Esmaili, M. A new Bi-objective model for a Two-echelon Capacitated Vehicle Routing Problem for Perishable Products with the Environmental Factor [Volume 30, Issue 4, 2017, Pages 523-531]
  • Esmaily, J. A Novel Intrusion Detection Systems based on Genetic Algorithms-suggested Features by the Means of Different Permutations of Labels’ Orders [Volume 30, Issue 10, 2017, Pages 1494-1502]
  • Ezzatneshan, Eslam Implementation of D3Q19 Lattice Boltzmann Method with a Curved Wall Boundary Condition for Simulation of Practical Flow Problems [Volume 30, Issue 9, 2017, Pages 1381-1390]

F

  • Fakhrzad, M. Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
  • Fallah, M. A New Mathematical Model To Optimize A Green Gas Network: A Case Study [Volume 30, Issue 7, 2017, Pages 1029-1037]
  • Fallah Nezhad, Mohammad Saber Design of a Reliable Facility Location Model for Health Service Networks [Volume 30, Issue 1, 2017, Pages 75-84]
  • Fallah Nezhad, Mohammad Saber Determining the Sample size for Estimation of the CCC-R Control Chart Parameters Based on Estimation Costs [Volume 30, Issue 2, 2017, Pages 253-260]
  • FallahNezhad, M. S. Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]
  • Farrahi, G. H. Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
  • Farzam-Alipour, S. Effect of Blade Design Parameters on Air Flow through an Axial Fan [Volume 30, Issue 10, 2017, Pages 1583-1591]
  • Fateh, M. M. Adaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors [Volume 30, Issue 4, 2017, Pages 507-515]
  • Fathollahi, A. Soft Soil Seismic Design Spectra Including Soil-structure Interaction [Volume 30, Issue 10, 2017, Pages 1443-1450]
  • Fattahi, P. Detailed Scheduling of Tree-like Pipeline Networks with Multiple Refineries [Volume 30, Issue 12, 2017, Pages 1870-1878]
  • Fattahi, Parviz Bi-objectives Approach for a Multi-period Two Echelons Perishable Product Inventory-routing Problem with Production and Lateral Transshipment [Volume 30, Issue 6, 2017, Pages 876-886]
  • Fazlali, A. R. Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
  • Fazli-Khalaf, M. A Robust Reliable Forward-reverse Supply Chain Network Design Model under Parameter and Disruption Uncertainties [Volume 30, Issue 8, 2017, Pages 1160-1169]
  • Feng, Liangang Comparative Analysis of Image Denoising Methods Based on Wavelet Transform and Threshold Functions [Volume 30, Issue 2, 2017, Pages 199-206]
  • Foroozesh, Nazanin Sustainable Supplier Selection by a New Hybrid Support Vector-model based on the Cuckoo Optimization Algorithm [Volume 30, Issue 6, 2017, Pages 867-875]

G

  • Gandomi, M. Behavioral Analysis of Traffic Flow for an Effective Network Traffic Identification [Volume 30, Issue 11, 2017, Pages 1740-1745]
  • Gangacharyulu, D. An Experimental Study on Thermophysical Properties of Multiwalled Carbon Nanotubes (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1223-1230]
  • Gannoun, R. Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
  • Ghader, S. Population Balance Equation Modeling of Crude Oil Demulsification Considering Demulsifier: Modification of Collision Frequency Function Based on Thermodynamic Model [Volume 30, Issue 10, 2017, Pages 1434-1442]
  • Ghadirzad, N. High Reynolds Viscous Flow Simulation Past the Elliptical Airfoil by Random Vortex Blob [Volume 30, Issue 12, 2017, Pages 1903-1910]
  • Ghaffari, A. R. Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
  • Ghafiri, A. Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
  • Ghaheri, S. Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
  • Gharib, M. A New Approach to Project Risk Responses Selection with Inter-dependent Risks [Volume 30, Issue 5, 2017, Pages 720-728]
  • Gharvirian, F. Neural Network Based Protection of Software Defined Network Controller against Distributed Denial of Service Attacks [Volume 30, Issue 11, 2017, Pages 1714-1722]
  • Ghasemi, J. A Novel Intrusion Detection Systems based on Genetic Algorithms-suggested Features by the Means of Different Permutations of Labels’ Orders [Volume 30, Issue 10, 2017, Pages 1494-1502]
  • Ghasemi, Jamal Kinematic Synthesis of Parallel Manipulator via Neural Network Approach [Volume 30, Issue 9, 2017, Pages 1319-1325]
  • Ghasemi, M. Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
  • Ghasemi, Mojtaba Effects of Partial Substitution of Styrene-butadiene-styrene with Granulated Blast-furnace Slag on the Strength Properties of Porous Asphalt [Volume 30, Issue 1, 2017, Pages 40-47]
  • Ghasemi, S. Design and Construction of a Sensorless Circuit for Brushless DC Motor using Third Harmonic back Electromotive Force [Volume 30, Issue 4, 2017, Pages 500-506]
  • Ghasemian, P. The Influence of Short Values of Hydraulic and Sludge Retention Time on Performance of a Membrane Bioreactor Treating Sunflower Oil Refinery Wastewater [Volume 30, Issue 10, 2017, Pages 1417-1424]
  • Ghassabi, M. Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions [Volume 30, Issue 10, 2017, Pages 1565-1572]
  • Gheyretmand, C. Numerical and Experimental Study of Soil-structure Interaction in Structures Resting on Loose Soil Using Laminar Shear Box [Volume 30, Issue 11, 2017, Pages 1654-1663]
  • Gholami, F. Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
  • Ghomi-Avili, Morteza A Network Design Model for a Resilient Closed-Loop Supply Chain with Lateral Transshipment [Volume 30, Issue 3, 2017, Pages 374-383]
  • Ghorbani, H. Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
  • Gitinavard, H. A New Extended Analytical Hierarchy Process Technique with Incomplete Interval-valued Information for Risk Assessment in IT Outsourcing [Volume 30, Issue 5, 2017, Pages 739-748]
  • Godini, H. Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
  • Guan, Z. C. Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]

H

  • Hadian Jazi, Shahram Fingertip Radius Effect of an on-Surface-Manipulated Object [Volume 30, Issue 1, 2017, Pages 134-142]
  • Haghighi, F. R. Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
  • Hajiaghaei-Keshteli, M. An Integrated Approach for Collection Center Selection in Reverse Logistics [Volume 30, Issue 7, 2017, Pages 1005-1016]
  • Hajiaghaei-Keshteli, Mostafa Addressing the Freight Consolidation and Containerization Problem by Recent and Hybridized Meta-heuristic Algorithms [Volume 30, Issue 3, 2017, Pages 403-410]
  • Hajian, M. Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
  • Haji Khamis, N. H. Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
  • Hamidi, Alireza Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
  • Hamidi, H. An Efficient Predictive Model for Probability of Genetic Diseases Transmission Using a Combined Model [Volume 30, Issue 8, 2017, Pages 1152-1159]
  • Hamidi, H. An Architecture for Security and Protection of Big Data [Volume 30, Issue 10, 2017, Pages 1479-1486]
  • Hamidi, H. Designing and Modeling a Control System for Aircraft in the Presence of Wind Disturbance (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1856-1862]
  • Hamidi, Hojatollah Improvement of Navigation Accuracy using Tightly Coupled Kalman Filter [Volume 30, Issue 2, 2017, Pages 215-223]
  • Hamidieh, A. A Robust Reliable Forward-reverse Supply Chain Network Design Model under Parameter and Disruption Uncertainties [Volume 30, Issue 8, 2017, Pages 1160-1169]
  • Hammou, A. D. Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
  • Hari Krishna, E. Empirical Mode Decomposition based Adaptive Filtering for Orthogonal Frequency Division Multiplexing Channel Estimation [Volume 30, Issue 10, 2017, Pages 1517-1525]
  • Harini, E. Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique [Volume 30, Issue 8, 2017, Pages 1253-1259]
  • Harish, T. Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique [Volume 30, Issue 8, 2017, Pages 1253-1259]
  • Hasani, S. M. Active Noise Cancellation using Online Wavelet Based Control System: Numerical and Experimental Study [Volume 30, Issue 1, 2017, Pages 120-126]
  • Hasanzadeh, R. The Effect of TiO2 Nanoparticles on Mechanical Properties of Poly Methyl Methacrylate Nanocomposites (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 807-813]
  • Hasanzadeh, Rezgar Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
  • Hashemi, M. Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
  • Hashemoghli, Arash A Novel Interactive Possibilistic Mixed Integer Nonlinear Model for Cellular Manufacturing Problem under Uncertainty [Volume 30, Issue 3, 2017, Pages 384-392]
  • Hasnain Isa, M. Equilibrium and Kinetic Studies on Lead (II) Adsorption by Sugarcane Bagasse Derived Activated Carbon (TECHNICAL NOTE) [Volume 30, Issue 11, 2017, Pages 1647-1653]
  • Hassani, R. The Investigation of Subsidence Effect on Buried Pipes in 3D Space [Volume 30, Issue 8, 2017, Pages 1182-1189]
  • Hassanpour, H. Image Enhancement Using an Adaptive Un-sharp Masking Method Considering the Gradient Variation [Volume 30, Issue 8, 2017, Pages 1118-1125]
  • Hassanpour, H. A Modfied Self-organizing Map Neural Network to Recognize Multi-font Printed Persian Numerals (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1700-1706]
  • Hassanpour, H. Behavioral Analysis of Traffic Flow for an Effective Network Traffic Identification [Volume 30, Issue 11, 2017, Pages 1740-1745]
  • Hassanpour, Hamid A Novel Image Structural Similarity Index Considering Image Content Detectability Using Maximally Stable Extremal Region Descriptor [Volume 30, Issue 2, 2017, Pages 172-181]
  • Hassen, W. Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
  • Heidari, M. Fault Detection of Bearings Using a Rule-based Classifier Ensemble and Genetic Algorithm [Volume 30, Issue 4, 2017, Pages 604-609]
  • Heidari-Rarani, M. Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions [Volume 30, Issue 10, 2017, Pages 1565-1572]
  • Hezarjaribi, yadollah Simulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm [Volume 30, Issue 6, 2017, Pages 846-850]
  • Hijab Abubakar, M. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Hosseini, M. Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
  • Hosseini, R. A Novel Type-2 Adaptive Neuro Fuzzy Inference System Classifier for Modelling Uncertainty in Prediction of Air Pollution Disaster (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1746-1751]
  • Hosseini, Sayed Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
  • Hosseini, Sayed Mohsen Incorporated Poly Acrylic Acid-co-Fe3O4 Nanoparticles Mixed Matrix Polyethersulfone based Nanofiltration Membrane in Desalination Process [Volume 30, Issue 6, 2017, Pages 821-829]
  • Hosseini, S. J. Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
  • Hosseini Hashemi, S. Free Vibration Analysis of Nonuniform Microbeams Based on Modified Couple Stress Theory: an Analytical Solution [Volume 30, Issue 2, 2017, Pages 311-320]
  • Hosseini-nasab, H. Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
  • Hou, Li Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
  • Hozhabrossadati, Seyed Mojtaba Free Vibration Analysis of a Six-degree-of-freedom Mass-spring System Suitable for Dynamic Vibration Absorbing of Space Frames [Volume 30, Issue 1, 2017, Pages 30-39]
  • Husain, A. Thermal Performance of Jet Impingement with Spent Flow Management [Volume 30, Issue 10, 2017, Pages 1599-1608]

I

  • Ilbegyan, Sara Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE) [Volume 30, Issue 2, 2017, Pages 162-171]
  • Ivanchikhin, S. V. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Ivanovich Nikolaev, N. Sedimentation Stability of Oil Well Cements in Directional Wells (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1105-1109]
  • Iziy, M. Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]

J

  • Jabari Moghadam, A. Slip Velocity in Flow and Heat Transfer of Non-newtonian Fluids in Microchannels [Volume 30, Issue 7, 2017, Pages 1054-1065]
  • Jabbarzadeh, Armin A Network Design Model for a Resilient Closed-Loop Supply Chain with Lateral Transshipment [Volume 30, Issue 3, 2017, Pages 374-383]
  • JafariNodoushan, T. Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]
  • Jafarmadar, Samad Hydraulic Network Modeling to Analyze Stream Flow Effectiveness on Heat Transfer Performance of Shell and Tube Heat Exchangers [Volume 30, Issue 6, 2017, Pages 904-911]
  • J. Afshari, Ahmad Addressing the Freight Consolidation and Containerization Problem by Recent and Hybridized Meta-heuristic Algorithms [Volume 30, Issue 3, 2017, Pages 403-410]
  • Jahanshahi, Mohsen Nanotechnology and Neuroscience Convergence: A Novel Tool for Neurotransmitters Monitoring [Volume 30, Issue 2, 2017, Pages 152-161]
  • Jahantigh, N. Providing an Analytical Model in Determining Nanofluids [Volume 30, Issue 12, 2017, Pages 1919-1924]
  • Jalali, G. A Network Design Model for a Resilient Closed-Loop Supply Chain with Lateral Transshipment [Volume 30, Issue 3, 2017, Pages 374-383]
  • Jam, S. Parallel Implementation of Particle Swarm Optimization Variants Using Graphics Processing Unit Platform [Volume 30, Issue 1, 2017, Pages 48-56]
  • Jamaati, M. Role of Interatomic Potentials in Simulation of Thermal Transport in Carbon Nanotubes [Volume 30, Issue 8, 2017, Pages 1231-1237]
  • Jamal Omidi, Majid A Numerical Study on Aluminum Plate Response under Low Velocity Impact [Volume 30, Issue 3, 2017, Pages 439-447]
  • Jamshidpour, F. Relationship between Pedestrians’ Speed, Density and Flow Rate of Crossings through Urban Intersections (Case Study: Rasht Metropolis) (RESEARCH NOTE) [Volume 30, Issue 12, 2017, Pages 1814-1821]
  • Janani, M. Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique [Volume 30, Issue 8, 2017, Pages 1253-1259]
  • Jarchi, Saughar A Planar, Layered Ultra-wideband Metamaterial Absorber for Microwave Frequencies [Volume 30, Issue 3, 2017, Pages 338-343]
  • Javadian, N. A Bi-objective Stochastic Optimization Model for Humanitarian Relief Chain by Using Evolutionary Algorithms [Volume 30, Issue 10, 2017, Pages 1526-1537]
  • Javanmardi, S. Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
  • Javdanian, H. The Effect of Geopolymerization on the Unconfined Compressive Strength of Stabilized Fine-grained Soils [Volume 30, Issue 11, 2017, Pages 1673-1680]
  • Jayanudin, J. Effect of Tofu Wastewater Addition on the Growth and Carbohydrate-Protein-Lipid Content of Spirulina platensis (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1631-1638]
  • Jozvaziri, Mohammad Ali Parametric Study of Movement Path in Two-dimensional Wing Flow Separation: Experimental Investigation [Volume 30, Issue 9, 2017, Pages 1401-1407]

K

  • Kabiri naeini, Mehdi Pattern Recognition in Control Chart Using Neural Network based on a New Statistical Feature [Volume 30, Issue 9, 2017, Pages 1372-1380]
  • Kakha, GH. H. Push Back Design in Two-element Deposits Incorporating Grade Uncertainty (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1279-1287]
  • Kakooei, S. Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
  • Kalpana, P. A New Hybrid Framework for Filter based Feature Selection using Information Gain and Symmetric Uncertainty (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 659-667]
  • Kamal, N. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
  • Kamarehie, B. Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
  • Karimi, G. R. Ballistic (n,0) Carbon Nanotube Field Effect Transistors' I-V Characteristics: A Comparison of n=3a+1 and n=3a+2 [Volume 30, Issue 4, 2017, Pages 516-522]
  • Karimipour-Fard, P. Performance Enhancement and Environmental Impact Analysis of a Solar Chimney Power Plant: Twenty-four-hour Simulation in Climate Condition of Isfahan Province, Iran [Volume 30, Issue 8, 2017, Pages 1260-1269]
  • Karimkhany, M. Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 814-820]
  • Karri, Rama Enhanced Predictions of Tides and Surges through Data Assimilation (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 23-29]
  • Karthikeyan, C. P. Investigation of Radiative Cooling Using a Photonic Composite Material for Water Harvesting [Volume 30, Issue 10, 2017, Pages 1573-1582]
  • Karunakaran, N. Performance Investigation of 405 Stainless Steel Thermosyphon using Cerium (IV) Oxide Nano Fluid [Volume 30, Issue 4, 2017, Pages 575-581]
  • Kashanian, H. Feature Dimension Reduction of Multisensor Data Fusion using Principal Component Fuzzy Analysis [Volume 30, Issue 4, 2017, Pages 493-499]
  • Kassou, F Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
  • Kebede, Solomon Performance Evaluation of Magnetorheological Damper Valve Configurations Using Finite Element Method [Volume 30, Issue 2, 2017, Pages 303-310]
  • Keshavarz Moraveji, M. Computational Fluid Dynamic- Two Fluid Model Study of Gas-Solid Heat Transfer in a Riser with Various Inclination Angles [Volume 30, Issue 4, 2017, Pages 464-472]
  • Keshmiri, mehdi Fingertip Radius Effect of an on-Surface-Manipulated Object [Volume 30, Issue 1, 2017, Pages 134-142]
  • Khademi, Ehsan A Strain Range Dependent Cyclic Plasticity Model [Volume 30, Issue 2, 2017, Pages 321-329]
  • Khademizare, H. Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
  • Khaksari, H Active Noise Cancellation using Online Wavelet Based Control System: Numerical and Experimental Study [Volume 30, Issue 1, 2017, Pages 120-126]
  • Khalil Arya, S. Hydraulic Network Modeling to Analyze Stream Flow Effectiveness on Heat Transfer Performance of Shell and Tube Heat Exchangers [Volume 30, Issue 6, 2017, Pages 904-911]
  • Khalili, S. Survival of Lactobacillus Acidophilus as Probiotic Bacteria using Chitosan Nanoparticles [Volume 30, Issue 4, 2017, Pages 456-463]
  • Khalili, V. Experimental Determination of the Optimum Ball Impacts for Solution of Silo Obstruction (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1215-1222]
  • Khalkhali, A. Optimum Design of a Coir Fiber Biocomposite Tube Reinforced with Nano Silica and Nano Clay Powder [Volume 30, Issue 12, 2017, Pages 1894-1902]
  • Khamedi, R. Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
  • Khanbabaie, Reza Nanotechnology and Neuroscience Convergence: A Novel Tool for Neurotransmitters Monitoring [Volume 30, Issue 2, 2017, Pages 152-161]
  • Khanlarzade, Narges Critical Path Method for Flexible Job Shop Scheduling Problem with Preemption [Volume 30, Issue 2, 2017, Pages 261-269]
  • Khavarpour, M. Survival of Lactobacillus Acidophilus as Probiotic Bacteria using Chitosan Nanoparticles [Volume 30, Issue 4, 2017, Pages 456-463]
  • Khayat, M. Numerical and Experimental Investigations for Design of a High Performance Micro-hydro-kinetic Turbine [Volume 30, Issue 5, 2017, Pages 785-790]
  • Khayati, G. R. Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
  • Khlie, K. Identification of the Patient Requirements Using Lean Six Sigma and Data Mining [Volume 30, Issue 5, 2017, Pages 691-699]
  • Khodakarami, Vahid Mixed-Model Assembly Line Balancing with Considering Reliability [Volume 30, Issue 3, 2017, Pages 411-423]
  • Khosravi, M. Experimental Determination of the Optimum Ball Impacts for Solution of Silo Obstruction (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1215-1222]
  • Khosravi, Mohammad Hossein A Novel Image Structural Similarity Index Considering Image Content Detectability Using Maximally Stable Extremal Region Descriptor [Volume 30, Issue 2, 2017, Pages 172-181]
  • Kiahosseini, S. R. The Effect of Caspian Sea Water on Corrosion Resistance and Compressive Strength of Reinforced Concrete Containing Different SiO2 Pozzolan [Volume 30, Issue 10, 2017, Pages 1464-1470]
  • Kochura, A. V. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Kordhaghi, F. Synthesis and Characterization of Anatase-coated Multiwall Carbon Nanotube for Improvement of Photocatalytic Activity [Volume 30, Issue 4, 2017, Pages 543-550]
  • Kosari, Mohammadreza Fluoride Ions Removal using Yttrium Alginate Biocomposite from an Aqueous Solution (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 1-6]
  • Krishnaiah, A. Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant [Volume 30, Issue 4, 2017, Pages 558-566]
  • Krishna Prasad, M. H. M. Mining Overlapping Communities in Real-world Networks Based on Extended Modularity Gain [Volume 30, Issue 4, 2017, Pages 486-492]
  • Krishna Teja, S. T. G. Investigation of Radiative Cooling Using a Photonic Composite Material for Water Harvesting [Volume 30, Issue 10, 2017, Pages 1573-1582]
  • Kumar, A. Turbofan Engine Performance under Reliability Measures Approach [Volume 30, Issue 4, 2017, Pages 610-619]
  • Kumar, A. Techno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms [Volume 30, Issue 10, 2017, Pages 1555-1564]
  • Kumar, P. Comparison of Permeability and Drying Shrinkage of Self Compacting Concrete Admixed with Wollastonite Micro Fiber and Flyash [Volume 30, Issue 11, 2017, Pages 1681-1690]
  • Kumar, R. Turbofan Engine Performance under Reliability Measures Approach [Volume 30, Issue 4, 2017, Pages 610-619]
  • Kumar, S. A Random Forest Classifier based on Genetic Algorithm for Cardiovascular Diseases Diagnosis (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1723-1729]
  • Kumar Roy, A. Comparison of Permeability and Drying Shrinkage of Self Compacting Concrete Admixed with Wollastonite Micro Fiber and Flyash [Volume 30, Issue 11, 2017, Pages 1681-1690]
  • Kumar Singh, R. Mathematical Investigation of Soil Temperature Variation for Geothermal Applications [Volume 30, Issue 10, 2017, Pages 1609-1614]
  • Kurahatti, Narayan G Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 127-133]

L

  • Lahderanta, E. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Leusheva, E. Development of Drilling Mud Solution for Drilling in Hard Rocks (RESEARCH NOTE) [Volume 30, Issue 4, 2017, Pages 620-626]
  • Liang, D. Y. Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
  • Lin, Lin Comparative Analysis of Image Denoising Methods Based on Wavelet Transform and Threshold Functions [Volume 30, Issue 2, 2017, Pages 199-206]
  • Liu, X. Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
  • Liu, Y. W. Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
  • Lokeshwar Reddy, C. Design and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques [Volume 30, Issue 11, 2017, Pages 1762-1770]

M

  • Mahdavi, Iraj A Novel Interactive Possibilistic Mixed Integer Nonlinear Model for Cellular Manufacturing Problem under Uncertainty [Volume 30, Issue 3, 2017, Pages 384-392]
  • Mahdavi Jafari, M. Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
  • Mahdavi Mazdeh, M. Coordinating Order Acceptance and Batch Delivery for an Integrated Supply Chain Scheduling [Volume 30, Issue 5, 2017, Pages 700-709]
  • Mahmoudkhani, S. The Transient Dynamics of a Beam Mounted on Spring Supports and Equipped with the Nonlinear Energy Sink [Volume 30, Issue 10, 2017, Pages 1545-1554]
  • Majzoobi, G. H. Numerical and Experimental Study of Ballistic Response of Kevlar Fabric and Kevlar/Epoxy Composite [Volume 30, Issue 5, 2017, Pages 791-799]
  • Majzoubi, G. H. A Strain Range Dependent Cyclic Plasticity Model [Volume 30, Issue 2, 2017, Pages 321-329]
  • Malekzadeh, M. Robust Attitude Control of Spacecraft Simulator with External Disturbances [Volume 30, Issue 4, 2017, Pages 567-574]
  • Mamaghani shishavan, Sajjad Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
  • Mani, K. A New Hybrid Framework for Filter based Feature Selection using Information Gain and Symmetric Uncertainty (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 659-667]
  • Manoj kumar, V. Modelling of Eyeball with Pan/Tilt Mechanism and Intelligent Face Recognition Using Local Binary Pattern Operator [Volume 30, Issue 7, 2017, Pages 1098-1104]
  • Manoj Kumar, V. Robot Arm Performing Writing through Speech Recognition Using Dynamic Time Warping Algorithm [Volume 30, Issue 8, 2017, Pages 1238-1245]
  • Manzoor Hussain, M. Analysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1074-1080]
  • Mao, S. Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects [Volume 30, Issue 11, 2017, Pages 1784-1791]
  • Marandi, Seyed Morteza Effects of Partial Substitution of Styrene-butadiene-styrene with Granulated Blast-furnace Slag on the Strength Properties of Porous Asphalt [Volume 30, Issue 1, 2017, Pages 40-47]
  • Marbout, A. Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
  • Marouf, Bahereh Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 93-100]
  • Marto, A. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Maruschak, P. O. Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]
  • Mary Sowjanya, A. Mining Interesting Aspects of a Product using Aspect-based Opinion Mining from Product Reviews (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1707-1713]
  • Mazinani, M. A Novel Type-2 Adaptive Neuro Fuzzy Inference System Classifier for Modelling Uncertainty in Prediction of Air Pollution Disaster (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1746-1751]
  • Mehdipour, R. A New Approach in Developing Optimal Defrost/Demist Performance in a Passenger Car (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1081-1089]
  • Mehri, A. Role of Interatomic Potentials in Simulation of Thermal Transport in Carbon Nanotubes [Volume 30, Issue 8, 2017, Pages 1231-1237]
  • Melnikov, Serhij Bertrand-nash Equilibrium in the Retail Duopoly Model under Asymmetric Costs [Volume 30, Issue 6, 2017, Pages 859-866]
  • Menasri, Y. Probabilistic Approach to the Seismic Vulnerability of RC Frame Structures by the Development of Analytical Fragility Curves [Volume 30, Issue 7, 2017, Pages 945-954]
  • MiarNaimi, H. Effective Design of a 3×4 Two Dimensional Distributed Amplifier Based on Gate Line Considerations [Volume 30, Issue 6, 2017, Pages 830-838]
  • Mirayababu, K. Mining Interesting Aspects of a Product using Aspect-based Opinion Mining from Product Reviews (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1707-1713]
  • M. M., Mahmoud Study on the Friction of Bored Cylindrical Rubber Protrusions Sliding on Ceramic [Volume 30, Issue 5, 2017, Pages 768-774]
  • Moaref, Afsoon Fuzzy-rough Information Gain Ratio Approach to Filter-wrapper Feature Selection [Volume 30, Issue 9, 2017, Pages 1326-1333]
  • Moazeni, Malihe Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
  • Modanloo, Vahid Investigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050 [Volume 30, Issue 6, 2017, Pages 920-925]
  • Modares, S. A Bi-objective Stochastic Optimization Model for Humanitarian Relief Chain by Using Evolutionary Algorithms [Volume 30, Issue 10, 2017, Pages 1526-1537]
  • Moghadassi, Abdolreza Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
  • Moghadassi, Abdolreza Incorporated Poly Acrylic Acid-co-Fe3O4 Nanoparticles Mixed Matrix Polyethersulfone based Nanofiltration Membrane in Desalination Process [Volume 30, Issue 6, 2017, Pages 821-829]
  • Mogheyse, AmirHamze Effective Design of a 3×4 Two Dimensional Distributed Amplifier Based on Gate Line Considerations [Volume 30, Issue 6, 2017, Pages 830-838]
  • Mohagheghi, V. Solving Critical Path Problem in Project Network by a New Enhanced Multi-objective Optimization of Simple Ratio Analysis Approach with Interval Type-2 Fuzzy Sets [Volume 30, Issue 9, 2017, Pages 1352-1361]
  • Mohagheghian, Azita Photochemical Degradation of 2,4-dichlorophenol in Aqueous Solutions by Fe2+/ Peroxydisulfate/ UV Process [Volume 30, Issue 1, 2017, Pages 15-22]
  • Mohajeri, A. A New Mathematical Model To Optimize A Green Gas Network: A Case Study [Volume 30, Issue 7, 2017, Pages 1029-1037]
  • Mohamadiyan, J. Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
  • Mohamed Kutty, S. Rahman Equilibrium and Kinetic Studies on Lead (II) Adsorption by Sugarcane Bagasse Derived Activated Carbon (TECHNICAL NOTE) [Volume 30, Issue 11, 2017, Pages 1647-1653]
  • Mohammadi, M. A Scheduling Model of Flexible Manufacturing System to Reduce Waste and Earliness/Tardiness Penalties [Volume 30, Issue 5, 2017, Pages 749-757]
  • Mohammadi, M. Thermostable α-amylase from Lignocellulosic Residues Using Bacillus amyloliquefaciens [Volume 30, Issue 8, 2017, Pages 1110-1117]
  • Mohammadi, Mohammad Solving a New Multi-objective Unrelated Parallel Machines Scheduling Problem by Hybrid Teaching-learning Based Optimization [Volume 30, Issue 2, 2017, Pages 224-233]
  • Mohammadi, Mohammad Reza A Numerical Study on Aluminum Plate Response under Low Velocity Impact [Volume 30, Issue 3, 2017, Pages 439-447]
  • Mohammad Zaheri, F. Numerical and Experimental Study of Ballistic Response of Kevlar Fabric and Kevlar/Epoxy Composite [Volume 30, Issue 5, 2017, Pages 791-799]
  • Mokhtari, Hadi Fitting the Three-parameter Weibull Distribution by using Greedy Randomized Adaptive Search Procedure [Volume 30, Issue 3, 2017, Pages 424-431]
  • Momeni, M. Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
  • Monjazi, M. Push Back Design in Two-element Deposits Incorporating Grade Uncertainty (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1279-1287]
  • Moosavian, H. Testing Soccer League Competition Algorithm in Comparison with Ten Popular Meta-heuristic Algorithms for Sizing Optimization of Truss Structures [Volume 30, Issue 7, 2017, Pages 926-936]
  • Moosavian, N. Testing Soccer League Competition Algorithm in Comparison with Ten Popular Meta-heuristic Algorithms for Sizing Optimization of Truss Structures [Volume 30, Issue 7, 2017, Pages 926-936]
  • Moradi CheshmehBeigi, Hassan Design and Simulation of a Moving-magnet-type Linear Synchronous Motor for Electromagnetic Launch System [Volume 30, Issue 3, 2017, Pages 351-356]
  • Morenov, V. Development of Drilling Mud Solution for Drilling in Hard Rocks (RESEARCH NOTE) [Volume 30, Issue 4, 2017, Pages 620-626]
  • Mortazavi, H. Designing and Modeling a Control System for Aircraft in the Presence of Wind Disturbance (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1856-1862]
  • Mortezaei, Z. Image Enhancement Using an Adaptive Un-sharp Masking Method Considering the Gradient Variation [Volume 30, Issue 8, 2017, Pages 1118-1125]
  • Mosalman, S. The Effect of TiO2 Nanoparticles on Mechanical Properties of Poly Methyl Methacrylate Nanocomposites (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 807-813]
  • Moslemipour, G. Performance Analysis of Dynamic and Static Facility Layouts in a Stochastic Environment [Volume 30, Issue 5, 2017, Pages 710-719]
  • Mostafaeipour, A. Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
  • Mostofizadeh, Ali Reza Parametric Study of Movement Path in Two-dimensional Wing Flow Separation: Experimental Investigation [Volume 30, Issue 9, 2017, Pages 1401-1407]
  • Motameni, M. An Adaptive Fuzzy Neural Network Model for Bankruptcy Prediction of Listed Companies on the Tehran Stock Exchange [Volume 30, Issue 12, 2017, Pages 1879-1884]
  • Mousavi, S. A. Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
  • Mousavi, S. M. Solving New Product Selection Problem by a New Hierarchical Group Decision-making Approach with Hesitant Fuzzy Setting [Volume 30, Issue 5, 2017, Pages 729-738]
  • Mousavi, S.M. Solving Critical Path Problem in Project Network by a New Enhanced Multi-objective Optimization of Simple Ratio Analysis Approach with Interval Type-2 Fuzzy Sets [Volume 30, Issue 9, 2017, Pages 1352-1361]
  • Movagharnejad, K. Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
  • Mozdgir, Ashkan Case Mix Planning using The Technique for Order of Preference by Similarity to Ideal Solution and Robust Estimation: a Case Study [Volume 30, Issue 9, 2017, Pages 1362-1371]
  • Murdas, I. A. Quadrature Amplitude Modulation All Optical Orthogonal Frequency Division Multiplexing-dense Wavelength Division Multiplexing-optical Wireless Communication System under Different Weather Conditions [Volume 30, Issue 7, 2017, Pages 988-994]
  • Murtaza, Q. Energy and Second Law of Thermodynamics Analysis of Shower Cooling Tower with Variation in Inlet Air Temperature [Volume 30, Issue 7, 2017, Pages 1090-1097]

N

  • Naderi, B. A Scheduling Model of Flexible Manufacturing System to Reduce Waste and Earliness/Tardiness Penalties [Volume 30, Issue 5, 2017, Pages 749-757]
  • Naderi, Bahman Solving a New Multi-objective Unrelated Parallel Machines Scheduling Problem by Hybrid Teaching-learning Based Optimization [Volume 30, Issue 2, 2017, Pages 224-233]
  • Naderi, Reza Base Level Evaluation in Buildings with Different Foundation Levels by Soil-foundation-structure Interaction [Volume 30, Issue 9, 2017, Pages 1288-1297]
  • NAEIMI, FARID Effect of Surface Morphologies on the Isothermal Oxidation Behavior of MCrAlY Coatings Fabricated by High-velocity Oxyfuel Processes [Volume 30, Issue 3, 2017, Pages 432-438]
  • Naghipour, Daryoosh Photochemical Degradation of 2,4-dichlorophenol in Aqueous Solutions by Fe2+/ Peroxydisulfate/ UV Process [Volume 30, Issue 1, 2017, Pages 15-22]
  • Naghizadeh, Ali Base Level Evaluation in Buildings with Different Foundation Levels by Soil-foundation-structure Interaction [Volume 30, Issue 9, 2017, Pages 1288-1297]
  • Najafi, E. Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
  • Najafi Moghaddam Gilani, V. Relationship between Pedestrians’ Speed, Density and Flow Rate of Crossings through Urban Intersections (Case Study: Rasht Metropolis) (RESEARCH NOTE) [Volume 30, Issue 12, 2017, Pages 1814-1821]
  • Najafi Moghaddam Gilani, V. Statistical Analysis of the Railway Accidents Causes in Iran (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1822-1830]
  • Najafpour, G. D. Thermostable α-amylase from Lignocellulosic Residues Using Bacillus amyloliquefaciens [Volume 30, Issue 8, 2017, Pages 1110-1117]
  • Najafpour, G. D. Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
  • Nakhai Kamalabadi, Isa Critical Path Method for Flexible Job Shop Scheduling Problem with Preemption [Volume 30, Issue 2, 2017, Pages 261-269]
  • Nasiri, Elahe Addressing the Freight Consolidation and Containerization Problem by Recent and Hybridized Meta-heuristic Algorithms [Volume 30, Issue 3, 2017, Pages 403-410]
  • Neshat, Najmeh A Game Theoretic Approach for Sustainable Power Systems Planning in Transition [Volume 30, Issue 3, 2017, Pages 393-402]
  • Neshati, M. H. Design and Development of High Gain, Low Profile and Circularly Polarized Cavity-backed Slot Antennas Using High-order Modes of Square Shaped Substrtae Integrated Waveguide Resonator [Volume 30, Issue 12, 2017, Pages 1840-1847]
  • Neshati, Mohammad Hassan Development of Forward-wave Directional Couplers Loaded by Periodic Shunt Shorted Stubs [Volume 30, Issue 3, 2017, Pages 344-350]
  • Niaz Azari, M. Optimal Design of a Brushless DC Motor, by Cuckoo Optimization Algorithm (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 668-677]
  • Nikravesh, Morteza Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering [Volume 30, Issue 2, 2017, Pages 288-293]
  • Nikulicheva, T. B. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Nikzad, M. Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
  • Noori, E. Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
  • Noroozi, A. Coordinating Order Acceptance and Batch Delivery for an Integrated Supply Chain Scheduling [Volume 30, Issue 5, 2017, Pages 700-709]
  • Noruzi, S. Fabrication of Spiral Stent with Superelastic/ Shape Memory Nitinol Alloy for Femoral Vessel [Volume 30, Issue 7, 2017, Pages 1048-1053]
  • Noshadi, N. Thermostable α-amylase from Lignocellulosic Residues Using Bacillus amyloliquefaciens [Volume 30, Issue 8, 2017, Pages 1110-1117]
  • Nouaouria, M. S. Probabilistic Approach to the Seismic Vulnerability of RC Frame Structures by the Development of Analytical Fragility Curves [Volume 30, Issue 7, 2017, Pages 945-954]
  • Nouri Koupaei, M. A Scheduling Model of Flexible Manufacturing System to Reduce Waste and Earliness/Tardiness Penalties [Volume 30, Issue 5, 2017, Pages 749-757]

O

  • Oladi, Z. Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
  • Oloomi Buygi, M. Impacts of Premium Bounds on the Operation of Put Option and Day-ahead Electricity Markets [Volume 30, Issue 11, 2017, Pages 1752-1761]
  • Owlia, Mohammad Saleh Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
  • Owlia, M. S. Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]

P

  • Paramashivaiah, B. M. Studies on Effect of Injection Timing of Graphene Nanoparticles Blended Simarouba Biodiesel Blend on CI Engine [Volume 30, Issue 8, 2017, Pages 1205-1214]
  • Parvania, M. Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
  • Patel, Sandip S. Multi-criteria Decision Making Approach: selection of Blanking Die Material (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 800-806]
  • Patoghi, Amirhosein A Time Dependent Pollution Routing Problem in Multi-graph [Volume 30, Issue 2, 2017, Pages 234-242]
  • Patra, H. P. A New Empirical Model to Increase the Accuracy of Software Cost Estimation (TECHNICAL NOTE) [Volume 30, Issue 10, 2017, Pages 1487-1493]
  • Paydar, M. M. An Integrated Approach for Collection Center Selection in Reverse Logistics [Volume 30, Issue 7, 2017, Pages 1005-1016]
  • Paydar, Mohammad Mahdi Buying Group Design Considering the Member’s Interest [Volume 30, Issue 9, 2017, Pages 1334-1341]
  • Peason, Raymod Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 93-100]
  • Piljuk, E. A. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Pishvaee, Mir Saman Design of a Reliable Facility Location Model for Health Service Networks [Volume 30, Issue 1, 2017, Pages 75-84]
  • Poladi, A. Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering [Volume 30, Issue 2, 2017, Pages 288-293]
  • Poladi, A. Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
  • Pouryafar, F. Thermostable α-amylase from Lignocellulosic Residues Using Bacillus amyloliquefaciens [Volume 30, Issue 8, 2017, Pages 1110-1117]
  • Pourzeynali, S. An Investigation on the Parameters Influencing the Pounding in Highway Bridges [Volume 30, Issue 9, 2017, Pages 1298-1308]
  • Prajapati, J. M. Multi-criteria Decision Making Approach: selection of Blanking Die Material (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 800-806]
  • Prakash, D. Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique [Volume 30, Issue 8, 2017, Pages 1253-1259]
  • Prasanth, I. S. N. V. R. Analysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1074-1080]

Q

  • Qaribpour, F. An Efficient Predictive Model for Probability of Genetic Diseases Transmission Using a Combined Model [Volume 30, Issue 8, 2017, Pages 1152-1159]
  • Qian, JB. Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]

R

  • Rad, M. Numerical and Experimental Investigations for Design of a High Performance Micro-hydro-kinetic Turbine [Volume 30, Issue 5, 2017, Pages 785-790]
  • Rafee, R. Effect of Blade Design Parameters on Air Flow through an Axial Fan [Volume 30, Issue 10, 2017, Pages 1583-1591]
  • Rafiee, E. Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
  • Raghunadha Reddy, T. A Document Weighted Approach for Gender and Age Prediction Based on Term Weight Measure [Volume 30, Issue 5, 2017, Pages 643-651]
  • Rahgozar, R. Stiffness-based Approach for Preliminary Design of Framed Tube Structures [Volume 30, Issue 11, 2017, Pages 1664-1672]
  • Rahimpour, M. R. Population Balance Equation Modeling of Crude Oil Demulsification Considering Demulsifier: Modification of Collision Frequency Function Based on Thermodynamic Model [Volume 30, Issue 10, 2017, Pages 1434-1442]
  • Rahmani-Ahranjani, A. Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
  • Rahnavard, Mohsen Hot Corrosion Behavior of Functional Graded Material Thermal Barrier Coating (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 101-108]
  • Rajabi, N. Effect of Blade Design Parameters on Air Flow through an Axial Fan [Volume 30, Issue 10, 2017, Pages 1583-1591]
  • Rajashekar, C. R. Studies on Effect of Injection Timing of Graphene Nanoparticles Blended Simarouba Biodiesel Blend on CI Engine [Volume 30, Issue 8, 2017, Pages 1205-1214]
  • Rajnish, K. A New Empirical Model to Increase the Accuracy of Software Cost Estimation (TECHNICAL NOTE) [Volume 30, Issue 10, 2017, Pages 1487-1493]
  • Rakani, F. Providing an Analytical Model in Determining Nanofluids [Volume 30, Issue 12, 2017, Pages 1919-1924]
  • Ram, M. Turbofan Engine Performance under Reliability Measures Approach [Volume 30, Issue 4, 2017, Pages 610-619]
  • Ramtekkar, G. Durable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials [Volume 30, Issue 7, 2017, Pages 964-971]
  • Ranga Rao, V. Eco-friendly Blocks by Blended Materials [Volume 30, Issue 5, 2017, Pages 636-642]
  • Rani, D.Elizabeth Embedded Memory Test Strategies and Repair [Volume 30, Issue 6, 2017, Pages 839-845]
  • Ranjbar, M. Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 814-820]
  • Ranjbar, M.M. Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE) [Volume 30, Issue 2, 2017, Pages 162-171]
  • Ransinchung R. N., G. D. Comparison of Permeability and Drying Shrinkage of Self Compacting Concrete Admixed with Wollastonite Micro Fiber and Flyash [Volume 30, Issue 11, 2017, Pages 1681-1690]
  • Rao Chintalapudi, S. Mining Overlapping Communities in Real-world Networks Based on Extended Modularity Gain [Volume 30, Issue 4, 2017, Pages 486-492]
  • Raouf Sheybani, H. Impacts of Premium Bounds on the Operation of Put Option and Day-ahead Electricity Markets [Volume 30, Issue 11, 2017, Pages 1752-1761]
  • Rashahmadi, S. The Effect of TiO2 Nanoparticles on Mechanical Properties of Poly Methyl Methacrylate Nanocomposites (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 807-813]
  • Rashed-Mohassel, Jalil A Planar, Layered Ultra-wideband Metamaterial Absorber for Microwave Frequencies [Volume 30, Issue 3, 2017, Pages 338-343]
  • Rasouli, Pouyan Fingertip Radius Effect of an on-Surface-Manipulated Object [Volume 30, Issue 1, 2017, Pages 134-142]
  • Rastgar, Mehdi Field Study and Evaluation of Buckling Behavior of Cylindrical Steel Tanks with Geometric Imperfections under Uniform External Pressure [Volume 30, Issue 9, 2017, Pages 1309-1318]
  • Rasti-Barzoki, M. Coordinating Order Acceptance and Batch Delivery for an Integrated Supply Chain Scheduling [Volume 30, Issue 5, 2017, Pages 700-709]
  • Rath, B. Durable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials [Volume 30, Issue 7, 2017, Pages 964-971]
  • Ravi, P. S. Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant [Volume 30, Issue 4, 2017, Pages 558-566]
  • Ravishankar, D. V. Analysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1074-1080]
  • Razmjooei, Dariush Improving Linearity of CMOS Variable-gain Amplifier Using Third-order Intermodulation Cancellation Mechanism and Intermodulation Distortion Sinking Techniques [Volume 30, Issue 2, 2017, Pages 192-198]
  • Rezaeian Zeidi, J. Pareto-based Multi-criteria Evolutionary Algorithm for Parallel Machines Scheduling Problem with Sequence-dependent Setup Times [Volume 30, Issue 12, 2017, Pages 1863-1869]
  • Rezai, H. Energy Aware Resource Management of Cloud Data Centers [Volume 30, Issue 11, 2017, Pages 1730-1739]
  • Rezaiee Pajand, M. Free Vibration Analysis of a Six-degree-of-freedom Mass-spring System Suitable for Dynamic Vibration Absorbing of Space Frames [Volume 30, Issue 1, 2017, Pages 30-39]
  • Reza Kashyzadeh, K. Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
  • Rezazadeh, G. Stabilization of Electrostatically Actuated Micro-pipe Conveying Fluid Using Parametric Excitation [Volume 30, Issue 12, 2017, Pages 1911-1918]
  • Ridha, S. Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
  • Rizi, M. H. Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
  • Rizvi, S. A. Effect of Friction Stir Welding on the Tensile Properties of AA6063 under Different Conditions [Volume 30, Issue 4, 2017, Pages 597-603]
  • Rizvi, S. A. Effect of Different Welding Parameters on the Mechanical and Microstructural Properties of Stainless Steel 304H Welded Joints [Volume 30, Issue 10, 2017, Pages 1592-1598]
  • Roshan, N. Population Balance Equation Modeling of Crude Oil Demulsification Considering Demulsifier: Modification of Collision Frequency Function Based on Thermodynamic Model [Volume 30, Issue 10, 2017, Pages 1434-1442]
  • Roshanian, J. Active Noise Cancellation using Online Wavelet Based Control System: Numerical and Experimental Study [Volume 30, Issue 1, 2017, Pages 120-126]
  • Rostamani, Razie A Dimensionless Parameter Approach based on Singular Value Decomposition and Evolutionary Algorithm for Prediction of Carbamazepine Particles Size [Volume 30, Issue 3, 2017, Pages 330-337]

S

  • Saadati, F. Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
  • Sabahno, H. The Effect of Measurement Errors on the Performance of Variable Sample Size and Sampling Interval Control Chart [Volume 30, Issue 7, 2017, Pages 995-1004]
  • Sabihi, A. Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
  • Sadati, Azam Solving a New Multi-objective Unrelated Parallel Machines Scheduling Problem by Hybrid Teaching-learning Based Optimization [Volume 30, Issue 2, 2017, Pages 224-233]
  • Sadeghi, Hojatollah Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
  • Sadeghijaleh, M. Adaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors [Volume 30, Issue 4, 2017, Pages 507-515]
  • Sadrnezhaad, S. K. Synthesis and Characterization of Anatase-coated Multiwall Carbon Nanotube for Improvement of Photocatalytic Activity [Volume 30, Issue 4, 2017, Pages 543-550]
  • Sadrnezhaad, S. K. Fabrication of Spiral Stent with Superelastic/ Shape Memory Nitinol Alloy for Femoral Vessel [Volume 30, Issue 7, 2017, Pages 1048-1053]
  • Saeedmonir, H. Numerical and Experimental Study of Soil-structure Interaction in Structures Resting on Loose Soil Using Laminar Shear Box [Volume 30, Issue 11, 2017, Pages 1654-1663]
  • Safaei, Abdulsattar Buying Group Design Considering the Member’s Interest [Volume 30, Issue 9, 2017, Pages 1334-1341]
  • Safaei, Abdul Sattar Buying Group Design Considering the Member’s Interest [Volume 30, Issue 9, 2017, Pages 1334-1341]
  • Safak Tunalioglu, M. Effect of Coating Materials on Wear in Internal Gears [Volume 30, Issue 11, 2017, Pages 1792-1799]
  • Safari, A. A Novel Type-2 Adaptive Neuro Fuzzy Inference System Classifier for Modelling Uncertainty in Prediction of Air Pollution Disaster (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1746-1751]
  • Sahoo, G. A Random Forest Classifier based on Genetic Algorithm for Cardiovascular Diseases Diagnosis (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1723-1729]
  • Sahraeian, R. A new Bi-objective model for a Two-echelon Capacitated Vehicle Routing Problem for Perishable Products with the Environmental Factor [Volume 30, Issue 4, 2017, Pages 523-531]
  • Saiah, H. Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
  • Saidi, M. H. A New Approach in Developing Optimal Defrost/Demist Performance in a Passenger Car (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1081-1089]
  • Sai Giridhar Reddy, V. Eco-friendly Blocks by Blended Materials [Volume 30, Issue 5, 2017, Pages 636-642]
  • Sai Viswanathan, M. Modelling of Eyeball with Pan/Tilt Mechanism and Intelligent Face Recognition Using Local Binary Pattern Operator [Volume 30, Issue 7, 2017, Pages 1098-1104]
  • Salahshoor, A. Designing and Modeling a Control System for Aircraft in the Presence of Wind Disturbance (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1856-1862]
  • Salihi, I. Umar Equilibrium and Kinetic Studies on Lead (II) Adsorption by Sugarcane Bagasse Derived Activated Carbon (TECHNICAL NOTE) [Volume 30, Issue 11, 2017, Pages 1647-1653]
  • Salmasnia, Ali Fitting the Three-parameter Weibull Distribution by using Greedy Randomized Adaptive Search Procedure [Volume 30, Issue 3, 2017, Pages 424-431]
  • Samadiani, N. A Modfied Self-organizing Map Neural Network to Recognize Multi-font Printed Persian Numerals (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1700-1706]
  • Samami, M. Optimal Design of a Brushless DC Motor, by Cuckoo Optimization Algorithm (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 668-677]
  • Samoei, Parvaneh Mixed-Model Assembly Line Balancing with Considering Reliability [Volume 30, Issue 3, 2017, Pages 411-423]
  • Samsher, G. Energy and Second Law of Thermodynamics Analysis of Shower Cooling Tower with Variation in Inlet Air Temperature [Volume 30, Issue 7, 2017, Pages 1090-1097]
  • Sarabandi, A. H. Slip Velocity in Flow and Heat Transfer of Non-newtonian Fluids in Microchannels [Volume 30, Issue 7, 2017, Pages 1054-1065]
  • Sarlak, A. Numerical and Experimental Study of Soil-structure Interaction in Structures Resting on Loose Soil Using Laminar Shear Box [Volume 30, Issue 11, 2017, Pages 1654-1663]
  • Satish Kumar, P. Design and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques [Volume 30, Issue 11, 2017, Pages 1762-1770]
  • Sattari-Naeini, Vahid Fuzzy-rough Information Gain Ratio Approach to Filter-wrapper Feature Selection [Volume 30, Issue 9, 2017, Pages 1326-1333]
  • SBITI, Nawal Risk Analysis of Operating Room Using the Fuzzy Bayesian Network Model [Volume 30, Issue 1, 2017, Pages 66-74]
  • Sedighi, Ali Reza A Novel Method for Implementing of Time-of-use to Improve the Performance of Electric Distribution Systems: A Case Study [Volume 30, Issue 3, 2017, Pages 357-365]
  • Seifbarghy, M. Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
  • Seifbarghy, M. Detailed Scheduling of Tree-like Pipeline Networks with Multiple Refineries [Volume 30, Issue 12, 2017, Pages 1870-1878]
  • Sepehrian, Hamid Fluoride Ions Removal using Yttrium Alginate Biocomposite from an Aqueous Solution (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 1-6]
  • Setak, Mostafa A Time Dependent Pollution Routing Problem in Multi-graph [Volume 30, Issue 2, 2017, Pages 234-242]
  • Setak, Mostafa Selecting Efficient Service-providers in Electric Power Distribution Industry Using Combinatorial Reverse Auction [Volume 30, Issue 9, 2017, Pages 1342-1351]
  • Setia, B. Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model [Volume 30, Issue 4, 2017, Pages 479-485]
  • Shabani, R. Stabilization of Electrostatically Actuated Micro-pipe Conveying Fluid Using Parametric Excitation [Volume 30, Issue 12, 2017, Pages 1911-1918]
  • Shafaei, Rasoul Case Mix Planning using The Technique for Order of Preference by Similarity to Ideal Solution and Robust Estimation: a Case Study [Volume 30, Issue 9, 2017, Pages 1362-1371]
  • Shafiei Nikabadi, M. Providing a Fuzzy Expert System to Assess the Maturity Level of Companies in Manufacturing Excellence in the Food Industry of Iran [Volume 30, Issue 4, 2017, Pages 532-542]
  • Shahbahrami, A. Parallel Implementation of Particle Swarm Optimization Variants Using Graphics Processing Unit Platform [Volume 30, Issue 1, 2017, Pages 48-56]
  • Shahbazi, B. Robust Attitude Control of Spacecraft Simulator with External Disturbances [Volume 30, Issue 4, 2017, Pages 567-574]
  • Shahiri, Jaber Effects of Partial Substitution of Styrene-butadiene-styrene with Granulated Blast-furnace Slag on the Strength Properties of Porous Asphalt [Volume 30, Issue 1, 2017, Pages 40-47]
  • Shahriari, A. Providing an Analytical Model in Determining Nanofluids [Volume 30, Issue 12, 2017, Pages 1919-1924]
  • Shakeri, Zohreh A Time Dependent Pollution Routing Problem in Multi-graph [Volume 30, Issue 2, 2017, Pages 234-242]
  • Shakhov, M. A. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Shakouri G., H. A Game Theoretic Approach for Sustainable Power Systems Planning in Transition [Volume 30, Issue 3, 2017, Pages 393-402]
  • Shamsabad Farahani, S. S. Design and Construction of a Sensorless Circuit for Brushless DC Motor using Third Harmonic back Electromotive Force [Volume 30, Issue 4, 2017, Pages 500-506]
  • Shams- khoramabadi, G. Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
  • Shams Nateri, M. The Effect of Material Properties on Sensitivity of the Microelectromechanical Systems Piezoelectric Hydrophone [Volume 30, Issue 12, 2017, Pages 1848-1855]
  • Sharifi, D. Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions [Volume 30, Issue 10, 2017, Pages 1565-1572]
  • Shariyat, M. Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
  • Sharma, Pankaj Unreliable Server Mx/G/1 Queue with Loss-delay, Balking and Second Optional Service [Volume 30, Issue 2, 2017, Pages 243-252]
  • Sharma, R. V. Mathematical Investigation of Soil Temperature Variation for Geothermal Applications [Volume 30, Issue 10, 2017, Pages 1609-1614]
  • Sharma, S. Kant Comparison of Permeability and Drying Shrinkage of Self Compacting Concrete Admixed with Wollastonite Micro Fiber and Flyash [Volume 30, Issue 11, 2017, Pages 1681-1690]
  • Shi, Y. C. Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
  • Shirazi, S. G. Ballistic (n,0) Carbon Nanotube Field Effect Transistors' I-V Characteristics: A Comparison of n=3a+1 and n=3a+2 [Volume 30, Issue 4, 2017, Pages 516-522]
  • Shokoufi, K. Pareto-based Multi-criteria Evolutionary Algorithm for Parallel Machines Scheduling Problem with Sequence-dependent Setup Times [Volume 30, Issue 12, 2017, Pages 1863-1869]
  • Showkati, Hossein Field Study and Evaluation of Buckling Behavior of Cylindrical Steel Tanks with Geometric Imperfections under Uniform External Pressure [Volume 30, Issue 9, 2017, Pages 1309-1318]
  • Shyam Kumar, M. B. Investigation of Radiative Cooling Using a Photonic Composite Material for Water Harvesting [Volume 30, Issue 10, 2017, Pages 1573-1582]
  • Siadatan, A. Design and Construction of a Sensorless Circuit for Brushless DC Motor using Third Harmonic back Electromotive Force [Volume 30, Issue 4, 2017, Pages 500-506]
  • Siahi, A. An Adaptive Fuzzy Neural Network Model for Bankruptcy Prediction of Listed Companies on the Tehran Stock Exchange [Volume 30, Issue 12, 2017, Pages 1879-1884]
  • Singh, G. An Experimental Study on Thermophysical Properties of Multiwalled Carbon Nanotubes (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1223-1230]
  • Singh, R. Effect of Friction Stir Welding on the Tensile Properties of AA6063 under Different Conditions [Volume 30, Issue 4, 2017, Pages 597-603]
  • Sivani, K. Empirical Mode Decomposition based Adaptive Filtering for Orthogonal Frequency Division Multiplexing Channel Estimation [Volume 30, Issue 10, 2017, Pages 1517-1525]
  • Sohrabvandi, S. A New Extended Analytical Hierarchy Process Technique with Incomplete Interval-valued Information for Risk Assessment in IT Outsourcing [Volume 30, Issue 5, 2017, Pages 739-748]
  • Sojoudi Ziyabari, S. H. Parallel Implementation of Particle Swarm Optimization Variants Using Graphics Processing Unit Platform [Volume 30, Issue 1, 2017, Pages 48-56]
  • Soleimani, H. Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
  • Soleimani, Mohammad Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 57-65]
  • Soltan, A. Design and Development of High Gain, Low Profile and Circularly Polarized Cavity-backed Slot Antennas Using High-order Modes of Square Shaped Substrtae Integrated Waveguide Resonator [Volume 30, Issue 12, 2017, Pages 1840-1847]
  • Soltan-Mohammadi, Omid A Planar, Layered Ultra-wideband Metamaterial Absorber for Microwave Frequencies [Volume 30, Issue 3, 2017, Pages 338-343]
  • Soofifard, R. A New Approach to Project Risk Responses Selection with Inter-dependent Risks [Volume 30, Issue 5, 2017, Pages 720-728]
  • Sorochak, A. P. Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]
  • Sridhar, G A Novel Generalized Topology for Multi-level Inverter with Switched Series-parallel DC Sources (RESEARCH NOTE) [Volume 30, Issue 6, 2017, Pages 851-858]
  • Srii Hari Thipesh, D. Robot Arm Performing Writing through Speech Recognition Using Dynamic Time Warping Algorithm [Volume 30, Issue 8, 2017, Pages 1238-1245]
  • Srinivasan, Sujatha Performance Evaluation of Magnetorheological Damper Valve Configurations Using Finite Element Method [Volume 30, Issue 2, 2017, Pages 303-310]
  • Srividya, K. Mining Interesting Aspects of a Product using Aspect-based Opinion Mining from Product Reviews (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1707-1713]
  • Sun, X. Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
  • Sun, Zhijun Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
  • Sundara Kuma, P. Eco-friendly Self-curing Concrete Incorporated with Polyethylene Glycol as Self-curing Agent (RESEARCH NOTE) [Volume 30, Issue 4, 2017, Pages 473-478]
  • Sushama, M. Design and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques [Volume 30, Issue 11, 2017, Pages 1762-1770]
  • Syaichurrozi, I. Effect of Tofu Wastewater Addition on the Growth and Carbohydrate-Protein-Lipid Content of Spirulina platensis (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1631-1638]
  • Syed, Abdul Sattar Embedded Memory Test Strategies and Repair [Volume 30, Issue 6, 2017, Pages 839-845]
  • Syzrantsev, V. Designing a High Resistant, High-torque Downhole Drilling Motor (RESEARCH NOTE) [Volume 30, Issue 10, 2017, Pages 1615-1621]
  • Syzrantseva, K. Designing a High Resistant, High-torque Downhole Drilling Motor (RESEARCH NOTE) [Volume 30, Issue 10, 2017, Pages 1615-1621]

T

  • Tabatabaee Moradi, S. S. Sedimentation Stability of Oil Well Cements in Directional Wells (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1105-1109]
  • Tabatabaeian, Zahra S. Development of Forward-wave Directional Couplers Loaded by Periodic Shunt Shorted Stubs [Volume 30, Issue 3, 2017, Pages 344-350]
  • Taghavi, Kamran Photochemical Degradation of 2,4-dichlorophenol in Aqueous Solutions by Fe2+/ Peroxydisulfate/ UV Process [Volume 30, Issue 1, 2017, Pages 15-22]
  • Tahari, Mostafa Effect of Surface Morphologies on the Isothermal Oxidation Behavior of MCrAlY Coatings Fabricated by High-velocity Oxyfuel Processes [Volume 30, Issue 3, 2017, Pages 432-438]
  • Taheri, Mohammad Reza Differential Flatness Method Based on Pre-set Guidance and Control Subsystem Design for a Surface to Surface Flying Vehicle (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 912-919]
  • Taheri Amiri, M. J. Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
  • Taherkhani, M. Detailed Scheduling of Tree-like Pipeline Networks with Multiple Refineries [Volume 30, Issue 12, 2017, Pages 1870-1878]
  • Tajdin, Ali A Novel Interactive Possibilistic Mixed Integer Nonlinear Model for Cellular Manufacturing Problem under Uncertainty [Volume 30, Issue 3, 2017, Pages 384-392]
  • Tajik Jamal-Abad, Milad Experimental Investigation on the Effect of Partially Metal Foam inside the Absorber of Parabolic Trough Solar Collector [Volume 30, Issue 2, 2017, Pages 281-287]
  • Talebnia, F. Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
  • Talebpour, M. H. The Effect of Caspian Sea Water on Corrosion Resistance and Compressive Strength of Reinforced Concrete Containing Different SiO2 Pozzolan [Volume 30, Issue 10, 2017, Pages 1464-1470]
  • Talebpour, Mohammad Hosein Base Level Evaluation in Buildings with Different Foundation Levels by Soil-foundation-structure Interaction [Volume 30, Issue 9, 2017, Pages 1288-1297]
  • Tang, R. Improved Adaptive Median Filter Algorithm for Removing Impulse Noise from Grayscale Images [Volume 30, Issue 10, 2017, Pages 1503-1509]
  • Tariverdilo, S. Investigating The Seismic Response of Structural Walls Using Nonlinear Static and Incremental Dynamic Analyses [Volume 30, Issue 11, 2017, Pages 1691-1699]
  • Tavakkoli-Moghaddam, R. Performance Analysis of Dynamic and Static Facility Layouts in a Stochastic Environment [Volume 30, Issue 5, 2017, Pages 710-719]
  • Tavakkoli-Moghaddam, R. Sustainable Supplier Selection by a New Hybrid Support Vector-model based on the Cuckoo Optimization Algorithm [Volume 30, Issue 6, 2017, Pages 867-875]
  • Tavakkoli-Moghaddam, R. Detailed Scheduling of Tree-like Pipeline Networks with Multiple Refineries [Volume 30, Issue 12, 2017, Pages 1870-1878]
  • Tavakkoli-Moghaddam, Reza Solving a New Multi-objective Unrelated Parallel Machines Scheduling Problem by Hybrid Teaching-learning Based Optimization [Volume 30, Issue 2, 2017, Pages 224-233]
  • Tavakkoli-Moghaddam, Reza A Network Design Model for a Resilient Closed-Loop Supply Chain with Lateral Transshipment [Volume 30, Issue 3, 2017, Pages 374-383]
  • Tavakolpour-Saleh, Alireza Multi-objective Optimization of Stirling Heat Engine Using Gray Wolf Optimization Algorithm (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 895-903]
  • Teimouri, Fahimeh Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
  • Tewari, S. P. Effect of Friction Stir Welding on the Tensile Properties of AA6063 under Different Conditions [Volume 30, Issue 4, 2017, Pages 597-603]
  • Tewari, S. P. Effect of Different Welding Parameters on the Mechanical and Microstructural Properties of Stainless Steel 304H Welded Joints [Volume 30, Issue 10, 2017, Pages 1592-1598]
  • Thakur, M. An Experimental Study on Thermophysical Properties of Multiwalled Carbon Nanotubes (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1223-1230]
  • Thrinath, G. Eco-friendly Self-curing Concrete Incorporated with Polyethylene Glycol as Self-curing Agent (RESEARCH NOTE) [Volume 30, Issue 4, 2017, Pages 473-478]
  • Toloei, A.R. Numerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions [Volume 30, Issue 6, 2017, Pages 887-894]
  • Torabi, K. Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions [Volume 30, Issue 10, 2017, Pages 1565-1572]
  • Torkzadeh, P. Stiffness-based Approach for Preliminary Design of Framed Tube Structures [Volume 30, Issue 11, 2017, Pages 1664-1672]
  • Tuc, B. Effect of Coating Materials on Wear in Internal Gears [Volume 30, Issue 11, 2017, Pages 1792-1799]

V

  • Valinejad, J. Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
  • Valizadeh, Ali Improvement of Navigation Accuracy using Tightly Coupled Kalman Filter [Volume 30, Issue 2, 2017, Pages 215-223]
  • Varmazyar, Mostafa Buoyancy Term Evolution in the Multi Relaxation Time Model of Lattice Boltzmann Method with Variable Thermal Conductivity Using a Modified Set of Boundary Conditions [Volume 30, Issue 9, 2017, Pages 1408-1416]
  • Verma, D. K. Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model [Volume 30, Issue 4, 2017, Pages 479-485]
  • Vijayapal Reddy, P. A Document Weighted Approach for Gender and Age Prediction Based on Term Weight Measure [Volume 30, Issue 5, 2017, Pages 643-651]
  • Vishnu Vardhan, B. A Document Weighted Approach for Gender and Age Prediction Based on Term Weight Measure [Volume 30, Issue 5, 2017, Pages 643-651]
  • Vladan, Babovic Enhanced Predictions of Tides and Surges through Data Assimilation (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 23-29]

W

  • Wang, C. An Effective Image Demosaicking Algorithm with Correlations among RGB Channels [Volume 30, Issue 8, 2017, Pages 1190-1196]
  • Wang, C. Single Image Dehazing Algorithm Based on Dark Channel Prior and Inverse Image [Volume 30, Issue 10, 2017, Pages 1471-1478]
  • Wang, D. Improved Adaptive Median Filter Algorithm for Removing Impulse Noise from Grayscale Images [Volume 30, Issue 10, 2017, Pages 1503-1509]
  • Wang, H. Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
  • Wei-Hua, S. Research on Safety Risk of Dangerous Chemicals Road Transportation Based on Dynamic Fault Tree and Bayesian Network Hybrid Method (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1144-1151]

X

  • Xiao-ping, B. Research on Safety Risk of Dangerous Chemicals Road Transportation Based on Dynamic Fault Tree and Bayesian Network Hybrid Method (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1144-1151]

Y

  • Yaghoibi, M. Cycle Time Reduction and Runtime Rebalancing by Reallocating Dependent Tasks [Volume 30, Issue 12, 2017, Pages 1831-1839]
  • Yahya, A. Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
  • Yang, XJ Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]
  • Yousefi Yegane, Babak Critical Path Method for Flexible Job Shop Scheduling Problem with Preemption [Volume 30, Issue 2, 2017, Pages 261-269]
  • Yu, G. An Effective Image Demosaicking Algorithm with Correlations among RGB Channels [Volume 30, Issue 8, 2017, Pages 1190-1196]
  • Yu, K. An Effective Image Demosaicking Algorithm with Correlations among RGB Channels [Volume 30, Issue 8, 2017, Pages 1190-1196]
  • Yu, Y. Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects [Volume 30, Issue 11, 2017, Pages 1784-1791]
  • Yuan, J. Y. Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
  • Yuan, RB Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]

Z

  • Zafarmand, B. High Reynolds Viscous Flow Simulation Past the Elliptical Airfoil by Random Vortex Blob [Volume 30, Issue 12, 2017, Pages 1903-1910]
  • Zahedi, M. Cycle Time Reduction and Runtime Rebalancing by Reallocating Dependent Tasks [Volume 30, Issue 12, 2017, Pages 1831-1839]
  • Zahedi Nejad, A. Numerical and Experimental Investigations for Design of a High Performance Micro-hydro-kinetic Turbine [Volume 30, Issue 5, 2017, Pages 785-790]
  • Zakhvalinskii, V. S. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Zakiev, I. M. Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]
  • Zangene, K. Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
  • Zarchi, Milad Numerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions [Volume 30, Issue 6, 2017, Pages 887-894]
  • Zare, Shahryar An Investigation on the Effects of Gas Pressure Drop in Heat Exchangers on Dynamics of a Free Piston Stirling Engine [Volume 30, Issue 2, 2017, Pages 294-302]
  • Zare, Shahryar Multi-objective Optimization of Stirling Heat Engine Using Gray Wolf Optimization Algorithm (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 895-903]
  • Zarean, Maryam Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
  • Zarei, M. Pareto-based Multi-criteria Evolutionary Algorithm for Parallel Machines Scheduling Problem with Sequence-dependent Setup Times [Volume 30, Issue 12, 2017, Pages 1863-1869]
  • Zaza, G. Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
  • Zhang, D. B. Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
  • Zhang, Haiyan Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
  • Zhang, W. Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
  • Zhang, Y. Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
  • Zhao, L. Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects [Volume 30, Issue 11, 2017, Pages 1784-1791]
  • Zhou, C. Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects [Volume 30, Issue 11, 2017, Pages 1784-1791]
  • Zhou, X. An Effective Image Demosaicking Algorithm with Correlations among RGB Channels [Volume 30, Issue 8, 2017, Pages 1190-1196]
  • Zhou, X. Single Image Dehazing Algorithm Based on Dark Channel Prior and Inverse Image [Volume 30, Issue 10, 2017, Pages 1471-1478]
  • Zhou, X. Improved Adaptive Median Filter Algorithm for Removing Impulse Noise from Grayscale Images [Volume 30, Issue 10, 2017, Pages 1503-1509]
  • Zinadini, S. Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
  • Zinatizadeh, A. A. Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
  • Zivarian, Hossein Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 57-65]
  • Zolfaghari, M. Modifications to Walker-Anderson Model for Analysis of High-velocity Penetration of an Eroding Long-rod Projectile into Semi-infinite Concrete Targets [Volume 30, Issue 5, 2017, Pages 775-784]
  • ZOULLOUTI, Bouchra Risk Analysis of Operating Room Using the Fuzzy Bayesian Network Model [Volume 30, Issue 1, 2017, Pages 66-74]
  • Zunaid, M. Energy and Second Law of Thermodynamics Analysis of Shower Cooling Tower with Variation in Inlet Air Temperature [Volume 30, Issue 7, 2017, Pages 1090-1097]