Author Index

A

  • A, MANIVANNAN Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
  • Abbasi, B. Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]
  • Abbasnejad, Alireza Frictional Strain Hardening-softening in Experimental and Numerical Investigation of Arching Effect [Volume 28, Issue 2, 2015, Pages 180-189]
  • Abbassi, A. Unsteady Heat and Mass Transfer Near the Stagnation-point on a Vertical Permeable Surface: a Comprehensive Report of Dual Solutions [Volume 28, Issue 5, 2015, Pages 771-780]
  • Abbaszadehtoori, MANOUCHEHR Attitude Estimation of Nano-satellite according to Navigation Sensors using of Combination Method (TECHNICAL NOTE) [Volume 28, Issue 7, 2015, Pages 964-969]
  • Abdul Samad, Abdul Aziz Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips [Volume 28, Issue 5, 2015, Pages 671-676]
  • Aftabi Sani, Ahmad Free Vibration Analysis of a Sloping-frame: Closed-form Solution versus Finite Element Solution and Modification of the Characteristic Matrices (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 378-386]
  • Aghajani Delavar, mojtaba Investigation of Thermo-hydraulic Performance of Circular Tube Fitted with Center-cleared Twisted Tape Using CFD Modeling (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 476-482]
  • Aghajani-Delavar, Naeem Design of a New Mathematical Model for Integrated Dynamic Cellular Manufacturing Systems and Production Planning [Volume 28, Issue 5, 2015, Pages 746-754]
  • Ahmadi Yazdi, Ahmad A Two Stage Stochastic Programming Model of the Price Decision Problem in the Dual-channel Closed-loop Supply Chain [Volume 28, Issue 5, 2015, Pages 738-745]
  • Ahmadnejad, Javad A MEMS Capacitive Microphone Modelling for Integrated Circuits [Volume 28, Issue 6, 2015, Pages 888-895]
  • Akbarpour, Hosna Discrete Multi Objective Particle Swarm Optimization Algorithm for FPGA Placement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 410-418]
  • Akhlaghian, Faranak Fe/TiO2 Catalyst for Photodegradation of Phenol in Water [Volume 28, Issue 4, 2015, Pages 499-506]
  • Akhondizadeh, Mehdi A New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 593-598]
  • Alam, Md. Analysis of Magneto-hydrodynamics Jeffery-Hamel Flow with Nanoparticles by Hermite-Padé Approximation [Volume 28, Issue 4, 2015, Pages 599-607]
  • Alferjani, Marwan Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips [Volume 28, Issue 5, 2015, Pages 671-676]
  • Ali Goodarz, Mohammad Reza Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
  • Alijani, Hossein Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process [Volume 28, Issue 8, 2015, Pages 1209-1218]
  • Alizadeh, Masoud Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
  • Alkarkhi, A. F. M. Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure? [Volume 28, Issue 11, 2015, Pages 1644-1650]
  • Allaedini, Ghazaleh Hydrodynamic Studies of Fluidized Bed Chemical Vapor Deposition Reactors to Produce Carbon Nano Tubes via Catalytic Decomposition over Co/Pd MgO [Volume 28, Issue 12, 2015, Pages 1693-1701]
  • Alqaraghuli, W. A. A. Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure? [Volume 28, Issue 11, 2015, Pages 1644-1650]
  • Ameri, Maede Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
  • Aminayi, Payam Hydrodynamic Studies of Fluidized Bed Chemical Vapor Deposition Reactors to Produce Carbon Nano Tubes via Catalytic Decomposition over Co/Pd MgO [Volume 28, Issue 12, 2015, Pages 1693-1701]
  • Amini, Malihe Phosphorus Removal from Dairy Wastewater in Batch Systems under Simultaneous Aerobic/Anaerobic Conditions: Application of Response Surface Methodology [Volume 28, Issue 6, 2015, Pages 855-863]
  • Amin Naseri, M.R. Solving Re-entrant No-wait Flow Shop Scheduling Problem [Volume 28, Issue 6, 2015, Pages 903-912]
  • Amiri, Ahad Vibration Analysis of Circular Magneto-Electro-Elastic Nano-plates Based on Eringen s Nonlocal Theory [Volume 28, Issue 12, 2015, Pages 1808-1817]
  • Amiri, Amirhossein Process Capability Index for Logistic Regression Profile Based on Spmk Index [Volume 28, Issue 8, 2015, Pages 1186-1192]
  • Anbia, Mansoor Investigation of Carbon Dioxide Adsorption on Amino-Functionalized Mesoporous Silica [Volume 28, Issue 6, 2015, Pages 848-854]
  • Ardekani, M.A. Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 460-466]
  • Ardeshir, Gholamreza Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
  • Ardestani, Fatemeh Evaluation of Cell Growth and Substrate Consumption Kinetic of Five Different Lactobacilli in a Submerged Batch Whey Culture for Lactic Acid Production [Volume 28, Issue 7, 2015, Pages 970-977]
  • Arham Nmazi, Abas Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
  • Asadi, Abolfazl Optimal Placement and Sizing of Fault Current Limiter in a Real Network: a Case Study (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 402-409]
  • Asadi, Sekineh Improving Dark Channel Prior for Single Image Dehazing [Volume 28, Issue 6, 2015, Pages 880-887]
  • Ashoorian, Peyman A Comparative Study of VHDL Implementation of FT-2D-cGA and FT-3D-cGA on Different Benchmarks (RESEARCH NOTE) [Volume 28, Issue 9, 2015, Pages 1276-1285]
  • Ashrafi, Arash Numerical Study on Improvement of Hydrofoil Performance using Vortex Generators (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 305-313]
  • Ashuri, Atefeh Drift Change Point Estimation in the rate and dependence Parameters of Autocorrelated Poisson Count Processes Using MLE Approach: An Application to IP Counts Data [Volume 28, Issue 7, 2015, Pages 1021-1030]
  • Askari D., Yousef Ultimate Unbonded Tendon Stress in CFRP Strengthened Post-Tensioned Indeterminate I-Beams Cast with HSCs [Volume 28, Issue 3, 2015, Pages 350-359]
  • Auti, Abhijit Experimental and Theoretical Study of Thompson Seedless Grapes Drying using Solar Evacuated Tube Collector with Force Convection Method [Volume 28, Issue 12, 2015, Pages 1796-1801]
  • Azadi, Shahram Liquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes [Volume 28, Issue 11, 2015, Pages 1671-1679]
  • Azari, Faeze Improving Dark Channel Prior for Single Image Dehazing [Volume 28, Issue 6, 2015, Pages 880-887]
  • Azimi, Hamed Numerical Analysis of Sediment Transport in Sewer Pipe [Volume 28, Issue 11, 2015, Pages 1564-1570]
  • Azizi, Vahid Lot Streaming in No-wait Multi Product Flowshop Considering Sequence Dependent Setup Times and Position Based Learning Factors [Volume 28, Issue 7, 2015, Pages 1031-1039]

B

  • Baharmast, Ashkan Evaluation of Column-Tree Moment Resisting Connection with End Plates and Haunched Beam (RESEARCH NOTE) [Volume 28, Issue 12, 2015, Pages 1702-1710]
  • Baharmast, Hessam Approximate Incremental Dynamic Analysis Using Reduction of Ground Motion Records [Volume 28, Issue 2, 2015, Pages 190-197]
  • Bahrevar, Mohammad-Ali Ethanol-based Tape Casting Process of the Textured Bi0.5(Na0.80K0.20)0.5TiO3-BiFeO3 Ceramics [Volume 28, Issue 4, 2015, Pages 561-566]
  • Bailin, FAN Research on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink [Volume 28, Issue 4, 2015, Pages 627-633]
  • Bakhtiari, Leila Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
  • Balasubramanian, Kannan Starvation Free Scheduler for Buffered Crossbar Switches (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 523-528]
  • Baleghi Damavandi, Yasser A Comparative Study of VHDL Implementation of FT-2D-cGA and FT-3D-cGA on Different Benchmarks (RESEARCH NOTE) [Volume 28, Issue 9, 2015, Pages 1276-1285]
  • Baniamerian, Zahra A Numerical Investigation on Aerodynamic Coefficients of Solar Troughs Considering Terrain Effects and Vortex Shedding [Volume 28, Issue 6, 2015, Pages 940-948]
  • Bani Mostafa Arab, Nasrollah Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
  • Bani Mostafa Arab, Nasrollah Investigation on Tensile Strength of Friction Stir Welded Joints in PP/EPDM/Clay Nanocomposites [Volume 28, Issue 9, 2015, Pages 1382-1391]
  • Bashiri, Mahdi A Reliable Multi-objective p-hub Covering Location Problem Considering of Hubs Capabilities [Volume 28, Issue 5, 2015, Pages 717-729]
  • Baygan, Majid More about Thermosyphone Rankine Cycle Performance Enhancement (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 642-647]
  • Behnam, K. Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses [Volume 28, Issue 9, 2015, Pages 1368-1374]
  • Ben aissia, Habib Numerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection [Volume 28, Issue 9, 2015, Pages 1343-1350]
  • Bhatia, Satvinder Singh Singular Value Decomposition based Steganography Technique for JPEG2000 Compressed Images [Volume 28, Issue 12, 2015, Pages 1720-1727]
  • Bhatnagar, Amit A Numerical Analysis for the Effect of Slip Velocity and Stenosis Shape on Non-Newtonian Flow of Blood (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 440-446]
  • Bonakdari, Hossein Predicting Shear Stress Distribution in Rectangular Channels Using Entropy Concept [Volume 28, Issue 3, 2015, Pages 360-367]
  • Bonakdari, Hossein Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
  • Bonakdari, Hossein Impact of the Confluence Angle on Flow Field and Flowmeter Accuracy in Open Channel Junctions [Volume 28, Issue 8, 2015, Pages 1145-1153]
  • Bonakdari, Hossein Impact of the Confluence Angle on Flow Field and Flowmeter Accuracy in Open Channel Junctions [Volume 28, Issue 8, 2015, Pages 1145-1153]
  • Bonakdari, Hossein Numerical Analysis of Sediment Transport in Sewer Pipe [Volume 28, Issue 11, 2015, Pages 1564-1570]
  • Borjini, Naceur Numerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection [Volume 28, Issue 9, 2015, Pages 1343-1350]
  • Bu, Yuhuan The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
  • Budiyono, Budiyono Microwave Pretreatment of Fresh Water Hyacinth (Eichhornia Crassipes) in Batch Anaerobic Digestion Tank (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 832-840]

C

  • Chandna, Ritu Reliability Measures Measurement under Rule-Based Fuzzy Logic Technique [Volume 28, Issue 10, 2015, Pages 1486-1492]
  • Chen, Jie Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
  • Chen, Zhijun Vibration of Train-Rail-Bridge Interaction Considering Rail Irregularity with Arbitrary Wavelength [Volume 28, Issue 4, 2015, Pages 516-522]

D

  • Daliri, Hamid A Particle Swarm Optimization Approach to Joint Location and Scheduling Decisions in A Flexible Job Shop Environment [Volume 28, Issue 12, 2015, Pages 1756-1764]
  • Dardel, Morteza Dynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint [Volume 28, Issue 2, 2015, Pages 243-250]
  • Dardel, Morteza A Simple Method for Modeling Open Cracked Beam [Volume 28, Issue 2, 2015, Pages 321-329]
  • Darvishi, Ali A Geometric View of Similarity Measures in Data Mining [Volume 28, Issue 12, 2015, Pages 1728-1737]
  • Dashti, Hamide Design Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays [Volume 28, Issue 5, 2015, Pages 686-692]
  • Dastjerdi, Shahriar Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 28, Issue 5, 2015, Pages 802-811]
  • Dastjerdi, Shahriar A Non-linear Static Equivalent Model for Multi-layer Annular/Circular Graphene Sheet Based on Non-local Elasticity Theory Considering Third Order Shear Deformation Theory in Thermal Environment [Volume 28, Issue 10, 2015, Pages 1533-1542]
  • Davarnejad, reza Numerical Comparison of Turbulent Heat Transfer and Flow Characteristics of SiO2/Water Nanofluid within Helically Corrugated Tubes and Plain Tube [Volume 28, Issue 10, 2015, Pages 1408-1414]
  • Devi, Chithra Starvation Free Scheduler for Buffered Crossbar Switches (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 523-528]
  • Dhaka, Vijaypal Offline Language-free Writer Identification based on Speeded-up Robust Features [Volume 28, Issue 7, 2015, Pages 984-994]
  • Djavareshkian, Mohammad Hossian Optimal Design of Magnetorheological Fluid Damper Based on Response Surface Method [Volume 28, Issue 9, 2015, Pages 1359-1367]
  • Duhan, Ravi Effect of Activated Flux on Properties of SS 304 Using TIG Welding [Volume 28, Issue 2, 2015, Pages 290-295]

E

  • Ebtehaj, Isa Numerical Analysis of Sediment Transport in Sewer Pipe [Volume 28, Issue 11, 2015, Pages 1564-1570]
  • Elrawaff, Blkasem Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips [Volume 28, Issue 5, 2015, Pages 671-676]
  • El-wazery, mahmoud Health Monitoring of Welded Steel Pipes by Vibration Analysis [Volume 28, Issue 12, 2015, Pages 1782-1789]
  • Erfan, Mohammad Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
  • Esfandian, Hossein Removal of Diazinon from Aqueous Solutions in Batch Systems Using Cu-modified Sodalite zeolite: An Application of Response Surface Methodology [Volume 28, Issue 11, 2015, Pages 1552-1563]
  • Esmaeili, Ali Optimal Design of Magnetorheological Fluid Damper Based on Response Surface Method [Volume 28, Issue 9, 2015, Pages 1359-1367]

F

  • Fakhari, Mojtaba Vibration Analysis of Circular Magneto-Electro-Elastic Nano-plates Based on Eringen s Nonlocal Theory [Volume 28, Issue 12, 2015, Pages 1808-1817]
  • Fallahian, Mohammd Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 567-572]
  • Faraji-Dana, Reza Complementary Periodic Structures for Miniaturization of Planar Antennas [Volume 28, Issue 10, 2015, Pages 1463-1468]
  • Farhani, F. Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 460-466]
  • Farshidi, Ebrahim Analysis of Integral Nonlinearity in Radix-4 Pipelined Analog-to-Digital Converters [Volume 28, Issue 4, 2015, Pages 546-552]
  • Feizi, Asghar Application of Combined Local Object Based Features and Cluster Fusion for the Behaviors Recognition and Detection of Abnormal Behaviors [Volume 28, Issue 11, 2015, Pages 1597-1604]
  • Feng, Wei An Investigation on Two Types of Crystalline Micro-diamond Film Coated Tools Lapping with Sapphire Wafer [Volume 28, Issue 12, 2015, Pages 1790-1795]
  • Feyzi, M. Reza Sensorless Indirect Field Oriented Control of Single-sided Linear Induction Motor With a Novel Sliding Mode MRAS Speed Estimator [Volume 28, Issue 7, 2015, Pages 1011-1020]
  • Foroutani, Kamran Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 567-572]

G

  • Ganghan, Huang Research on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink [Volume 28, Issue 4, 2015, Pages 627-633]
  • Ge, Longlong The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
  • Ge, Wenqing Benefits of the Electromagnetic Actuated Valve Train in Gasoline Engine Application [Volume 28, Issue 11, 2015, Pages 1656-1662]
  • Ghanbari, Arezoo Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
  • Ghanbari Sorkhi, Ali People Re-identification in Non-overlapping Field-of-views using Cumulative Brightness Transform Function and Body Segments in Different Color Spaces [Volume 28, Issue 12, 2015, Pages 1711-1719]
  • GHARIBLU, HASHEM The Effect of Base Position on Maximum Allowable Load of Dual Arm Robots [Volume 28, Issue 2, 2015, Pages 284-294]
  • Ghasemi, Bahman Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process [Volume 28, Issue 8, 2015, Pages 1209-1218]
  • Ghasemi, Ebrahim Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
  • Ghaseminejad, Amin A Quaternion Firefly Algorithm to Solve a Multi-row Facility Layout Problem (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1605-1613]
  • Ghasemlu, Sadjad Simulation of Strap-On Boosters Separation in the Atmosphere [Volume 28, Issue 2, 2015, Pages 164-171]
  • Ghassemi, Hassan Numerical Study on Improvement of Hydrofoil Performance using Vortex Generators (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 305-313]
  • Ghazavi, Mohammadreza Dynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers [Volume 28, Issue 9, 2015, Pages 1351-1358]
  • Gholami, Mohammad Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
  • Gitinavard, H. A New Balancing and Ranking Method based on Hesitant Fuzzy Sets for Solving Decision-making Problems under Uncertainty [Volume 28, Issue 2, 2015, Pages 214-223]
  • Gitinavard, H. Evaluating Construction Projects by a New Group Decision-Making Model Based on Intuitionistic Fuzzy Logic Concepts [Volume 28, Issue 9, 2015, Pages 1312-1319]
  • Goharriz, Mojtaba Assessment of Lateral Displacements using Neuro-Fuzzy Group Method of Data Handling Systems [Volume 28, Issue 5, 2015, Pages 677-685]
  • Golbakhshi, Hossein Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1525-1532]
  • Golestanipour, Masoud A Novel, Simple and Cost Effective Al A356/Al2O3 Nano-composite Manufacturing Route with Uniform Distribution of Nanoparticles [Volume 28, Issue 9, 2015, Pages 1320-1327]
  • Golzarfar, Arman Optimal Placement and Sizing of Fault Current Limiter in a Real Network: a Case Study (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 402-409]
  • Guo, Zhaolu Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
  • Gupta, Nisha Quasi Random Deployment Strategy for Reliable Communication Backbones in Wireless Sensor Networks [Volume 28, Issue 10, 2015, Pages 1430-1438]

H

  • Habibolahzadeh, Ali Duplex Surface Treatment of AISI 1045 Steel via Plasma Nitriding of Titanized Layer [Volume 28, Issue 8, 2015, Pages 1193-1198]
  • Haji Kazemi, H. Verification of an Evolutionary-based Wavelet Neural Network Model for Nonlinear Function Approximation [Volume 28, Issue 10, 2015, Pages 1423-1429]
  • Hasani, Aliakbar Comprehensive Decision Modeling of Reverse Logistics System: A Multi-criteria Decision Making Model by using Hybrid Evidential Reasoning Approach and TOPSIS (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 922-931]
  • Hasani, Aliakbar A Hybrid Meta-heuristic for the Dynamic Layout Problem with Transportation System Design [Volume 28, Issue 8, 2015, Pages 1175-1185]
  • Hashemi, Mohammad Jafar Flexural Behavior of Polyester Polymer Concrete Subjected to Different Chemicals [Volume 28, Issue 7, 2015, Pages 978-983]
  • Hashemi, Seyyed Mohammad Ali Verification of an Evolutionary-based Wavelet Neural Network Model for Nonlinear Function Approximation [Volume 28, Issue 10, 2015, Pages 1423-1429]
  • Hassan Ghasemi, Mohammad A Simple Method for Modeling Open Cracked Beam [Volume 28, Issue 2, 2015, Pages 321-329]
  • Hassanpour, Hamid Improving Dark Channel Prior for Single Image Dehazing [Volume 28, Issue 6, 2015, Pages 880-887]
  • Hassanpour, Hamid People Re-identification in Non-overlapping Field-of-views using Cumulative Brightness Transform Function and Body Segments in Different Color Spaces [Volume 28, Issue 12, 2015, Pages 1711-1719]
  • Hassanpour, Hamid A Geometric View of Similarity Measures in Data Mining [Volume 28, Issue 12, 2015, Pages 1728-1737]
  • Hatefi, Seyed Morteza A Common Weight Multi-criteria Decision analysis-data Envelopment Analysis Approach with Assurance Region for Weight Derivation from Pairwise Comparison Matrices [Volume 28, Issue 12, 2015, Pages 1746-1755]
  • Heydarian, S. Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses [Volume 28, Issue 9, 2015, Pages 1368-1374]
  • Holakooie, Mohammad Hosein Sensorless Indirect Field Oriented Control of Single-sided Linear Induction Motor With a Novel Sliding Mode MRAS Speed Estimator [Volume 28, Issue 7, 2015, Pages 1011-1020]
  • Hong, Rongjing Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
  • HosseinAlizadeh, R. Artificial Neural Network Approach for Modeling of Mercury Adsorption from Aqueous Solution by Sargassum Bevanom Algae (RESEARCH NOTE) [Volume 28, Issue 8, 2015, Pages 1124-1133]
  • Hosseingholi, Mahboobeh Room Temperature Synthesis of N-doped Urchin-like Rutile TiO2 Nanostructure With Enhanced Photocatalytic Activity Under Sunlight [Volume 28, Issue 10, 2015, Pages 1401-1407]
  • Hosseinzadeh, Hamed Thermal Simulation of Solidification Process in Continuous Casting [Volume 28, Issue 5, 2015, Pages 812-821]
  • Hou, Li Vibration Characteristics of Heavy Load Rackwith Split-hom together Structure (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 277-283]

I

  • ISLAM, MOHAMMAD Selection of Intermodal Conductivity Averaging Scheme for Unsaturated Flow in Homogeneous Media [Volume 28, Issue 4, 2015, Pages 490-498]
  • Izadi Zamanabadi, Esmaeel Two Important Issues Relevant to Torsional Response of Asymmetric 8-Story RC BuildingDesigned with Direct Displacement based Design Approach [Volume 28, Issue 9, 2015, Pages 1257-1267]

J

  • Jabari Moghadam, Ali Thermal Simulation of Solidification Process in Continuous Casting [Volume 28, Issue 5, 2015, Pages 812-821]
  • Jabbari, Mona Lot Streaming in No-wait Multi Product Flowshop Considering Sequence Dependent Setup Times and Position Based Learning Factors [Volume 28, Issue 7, 2015, Pages 1031-1039]
  • Jabbarzadeh, Mehrdad Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 28, Issue 5, 2015, Pages 802-811]
  • Jabbarzadeh, Mehrdad A Non-linear Static Equivalent Model for Multi-layer Annular/Circular Graphene Sheet Based on Non-local Elasticity Theory Considering Third Order Shear Deformation Theory in Thermal Environment [Volume 28, Issue 10, 2015, Pages 1533-1542]
  • Jafari, Amin Size Effect on Free Transverse Vibration of Cracked Nano-beams using Couple Stress Theory [Volume 28, Issue 2, 2015, Pages 296-304]
  • Jafari, Mostafa Simulation of Strap-On Boosters Separation in the Atmosphere [Volume 28, Issue 2, 2015, Pages 164-171]
  • Jafarsadeghi-pournaki, Ilgar Vibration Analysis of Circular Magneto-Electro-Elastic Nano-plates Based on Eringen s Nonlocal Theory [Volume 28, Issue 12, 2015, Pages 1808-1817]
  • Jakhar, Amit Measurement of Complexity and Comprehension of a Program Through a Cognitive Approach [Volume 28, Issue 11, 2015, Pages 1579-1588]
  • Jalili, Shima Comparison of the Progressive Collapse Resistance of Seismically Designed Steel Shear Wall Frames And Special Steel Moment Frames [Volume 28, Issue 6, 2015, Pages 871-879]
  • Jamshidi, Masoud Flexural Behavior of Polyester Polymer Concrete Subjected to Different Chemicals [Volume 28, Issue 7, 2015, Pages 978-983]
  • Jarchi, Saughar Complementary Periodic Structures for Miniaturization of Planar Antennas [Volume 28, Issue 10, 2015, Pages 1463-1468]
  • Javadi, Akbar Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
  • Javadpour, J. Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
  • JAVANMARD, ABOLFAZL The Effect of Base Position on Maximum Allowable Load of Dual Arm Robots [Volume 28, Issue 2, 2015, Pages 284-294]
  • Jiang, Dongming Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
  • Jiang, Zhansi An Improved N-dimensional NURBs-based Metamodel [Volume 28, Issue 8, 2015, Pages 1219-1225]

K

  • Kabiri naeini, Mehdi A New Statistical Approach for Recognizing and Classifying Patterns of Control Charts (RESEARCH NOTE) [Volume 28, Issue 7, 2015, Pages 1040-1048]
  • Kaffash, Mohammad Hossein A Novel Similarity Solution of Turbulent Boundary Layer Flow over a Flat Plate [Volume 28, Issue 11, 2015, Pages 1680-1686]
  • Kahrobaee, Saeed Applications of Impedance Plane and Magnetic Differential Permeability in Microstructural Characterization of AISI D2 Tool Steel [Volume 28, Issue 2, 2015, Pages 234-242]
  • Kalantari, Zahra Predicting the buckling Capacity of Steel Cylindrical Shells with Rectangular Stringers under Axial Loading by using Artificial Neural Networks [Volume 28, Issue 8, 2015, Pages 1154-1159]
  • Kanjanawanishkul, Kiattisin Path Following and Velocity Optimizing for an Omnidirectional Mobile Robot [Volume 28, Issue 4, 2015, Pages 537-545]
  • Karamodin, Abbas Verification of an Evolutionary-based Wavelet Neural Network Model for Nonlinear Function Approximation [Volume 28, Issue 10, 2015, Pages 1423-1429]
  • Kargar, fariborz A Numerical Investigation on Aerodynamic Coefficients of Solar Troughs Considering Terrain Effects and Vortex Shedding [Volume 28, Issue 6, 2015, Pages 940-948]
  • Karimi, Gholamreza Discrete Multi Objective Particle Swarm Optimization Algorithm for FPGA Placement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 410-418]
  • Karimi, Hossein A Congested Double Path Approach for a Hub Location-allocation Problem with Service Level at Hubs [Volume 28, Issue 7, 2015, Pages 1049-1058]
  • Karimi, Hossein Investigating Zone Pricing in a Location-Routing Problem Using a Variable Neighborhood Search Algorithm [Volume 28, Issue 11, 2015, Pages 1624-1633]
  • Kasana, Geeta Singular Value Decomposition based Steganography Technique for JPEG2000 Compressed Images [Volume 28, Issue 12, 2015, Pages 1720-1727]
  • Kashefi, Mehrdad Applications of Impedance Plane and Magnetic Differential Permeability in Microstructural Characterization of AISI D2 Tool Steel [Volume 28, Issue 2, 2015, Pages 234-242]
  • Kasi, Ramesh Kumar A Novel Protection Guaranteed, Quality of Transmission Aware Routing and Wavelength Assignment Algorithm for All-optical Networks [Volume 28, Issue 7, 2015, Pages 995-1001]
  • Kavianipour, Omid Vibration Suppression of Fuel Sloshing using Subband Adaptive Filtering (RESEARCH NOTE) [Volume 28, Issue 10, 2015, Pages 1507-1514]
  • Kazemi, Reza Liquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes [Volume 28, Issue 11, 2015, Pages 1671-1679]
  • Ketabdari, Mohammad Javad Numerical Study on Improvement of Hydrofoil Performance using Vortex Generators (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 305-313]
  • Khadivi, heydar A Novel, Simple and Cost Effective Al A356/Al2O3 Nano-composite Manufacturing Route with Uniform Distribution of Nanoparticles [Volume 28, Issue 9, 2015, Pages 1320-1327]
  • Khalilarya, Shahram A Parametric Study on Exergy and Exergoeconomic Analysis of a Diesel Engine based Combined Heat and Power System [Volume 28, Issue 4, 2015, Pages 608-617]
  • Khalkhali, Abolfazl Multi-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft [Volume 28, Issue 4, 2015, Pages 583-592]
  • Khalkhali, Abolfazl Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1663-1670]
  • Khan, Dr. Md. Abdul Hakim Analysis of Magneto-hydrodynamics Jeffery-Hamel Flow with Nanoparticles by Hermite-Padé Approximation [Volume 28, Issue 4, 2015, Pages 599-607]
  • Khayati, Gholam Batch Kinetics and Modeling of Alkaline Protease Production by Isolated Bacillus sp. (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 841-847]
  • Kheiri, Maryam Numerical Comparison of Turbulent Heat Transfer and Flow Characteristics of SiO2/Water Nanofluid within Helically Corrugated Tubes and Plain Tube [Volume 28, Issue 10, 2015, Pages 1408-1414]
  • Khordadi, Mohammad Climate Change Impact on Precipitation Extreme Events in Uncertainty Situation; Passing from Global Scale to Regional Scale [Volume 28, Issue 8, 2015, Pages 1140-1144]
  • Khoshnam, Farhad Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1525-1532]
  • Khoshnood, Abdul Majid Vibration Suppression of Fuel Sloshing using Subband Adaptive Filtering (RESEARCH NOTE) [Volume 28, Issue 10, 2015, Pages 1507-1514]
  • Khosrowjerdi, Mohammad Javad Stability and Performance Attainment with Fixed Order Controller Using Frequency Response [Volume 28, Issue 4, 2015, Pages 553-560]
  • Kolbadi nezhad, marzie Characterization of Polypyrrole-hydroxyethylcellulose/TiO2 Nanocomposite: Thermal Properties and AFM Analysis [Volume 28, Issue 5, 2015, Pages 654-661]
  • Koohi, Hamidreza Dynamic Obstacle Avoidance by Distributed Algorithm based on Reinforcement Learning (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 198-204]
  • Kosari, Mohammadreza Zinc Adsorption Properties of Alginate-SBA-15 Nanocomposite [Volume 28, Issue 10, 2015, Pages 1415-1422]
  • KUMAR, N.SENTHIL Implementation of Floating Output Interleaved Input DC-DC Boost Converter [Volume 28, Issue 9, 2015, Pages 1286-1294]

L

  • LAHIJANI, POOYA Catalytic Effect of Metal Species on Enhancement of CO2 Gasification Reactivity of Biomass Char [Volume 28, Issue 9, 2015, Pages 1251-1256]
  • Li, Bin Modelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool [Volume 28, Issue 7, 2015, Pages 1090-1098]
  • Li, Bo Vibration Characteristics of Heavy Load Rackwith Split-hom together Structure (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 277-283]
  • Li, Bo Benefits of the Electromagnetic Actuated Valve Train in Gasoline Engine Application [Volume 28, Issue 11, 2015, Pages 1656-1662]
  • Li, Kangshun Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
  • Long, Yuhong An Improved N-dimensional NURBs-based Metamodel [Volume 28, Issue 8, 2015, Pages 1219-1225]
  • Low, H. C. Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure? [Volume 28, Issue 11, 2015, Pages 1644-1650]

M

  • M, SenthilKumar Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance [Volume 28, Issue 6, 2015, Pages 932-939]
  • M, Venkatesan Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
  • Ma, Liquan An Improved N-dimensional NURBs-based Metamodel [Volume 28, Issue 8, 2015, Pages 1219-1225]
  • Madinei, Hadi State Estimation of MEMs Capacitor Using Taylor Expansion [Volume 28, Issue 5, 2015, Pages 764-770]
  • Mahjouri, saeid Vibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study [Volume 28, Issue 11, 2015, Pages 1687-1692]
  • Mahmoudi, A.H. Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses [Volume 28, Issue 9, 2015, Pages 1368-1374]
  • Makui, A. Reliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1476-1485]
  • Maleki, Mohammad Reza Online Monitoring and Fault Diagnosis of Multivariate-attribute Process Mean Using Neural Networks and Discriminant Analysis Technique [Volume 28, Issue 11, 2015, Pages 1634-1643]
  • Mansoori, Elham Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
  • Mansouri, S. H. A New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 593-598]
  • Manteghi, Manuchehr A New Model for Fleet Assignment Problem, Case Study of Iran Air Network at Vision 2036 [Volume 28, Issue 11, 2015, Pages 1614-1623]
  • Marandi, Seyed Morteza Assessment of Lateral Displacements using Neuro-Fuzzy Group Method of Data Handling Systems [Volume 28, Issue 5, 2015, Pages 677-685]
  • Maroofi, Mohammad Investigation of Thermoelastic Damping in the Longitudinal Vibration of a Micro Beam [Volume 28, Issue 2, 2015, Pages 314-320]
  • Mazidi Sharfabadi, Mohsen Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 460-466]
  • Mazzeo, Pier Luigi People Re-identification in Non-overlapping Field-of-views using Cumulative Brightness Transform Function and Body Segments in Different Color Spaces [Volume 28, Issue 12, 2015, Pages 1711-1719]
  • Mehdizadeh, Esmaeil Design of a New Mathematical Model for Integrated Dynamic Cellular Manufacturing Systems and Production Planning [Volume 28, Issue 5, 2015, Pages 746-754]
  • Mehrpanahi, Abdollah Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
  • MiarNaimi, H. Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
  • Minatour, Yasser Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
  • Mirzaei, Ebrahim Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
  • Mobini, kamran Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
  • Mobki, Hamed Application of Thau Observer for Fault Detection of Micro Parallel Plate Capacitor Subjected to Nonlinear Electrostatic Force [Volume 28, Issue 2, 2015, Pages 270-276]
  • Mobki, Hamed Design of Direct Exponential Observers for Fault Detection of Nonlinear MEMS Tunable Capacitor [Volume 28, Issue 4, 2015, Pages 634-641]
  • Mobki, Hamed State Estimation of MEMs Capacitor Using Taylor Expansion [Volume 28, Issue 5, 2015, Pages 764-770]
  • Modaresahmadi, Sina Dynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers [Volume 28, Issue 9, 2015, Pages 1351-1358]
  • Mofid Nakhaei, Amar A Simple Method for Modeling Open Cracked Beam [Volume 28, Issue 2, 2015, Pages 321-329]
  • Moghadam-Fard, Hamid Active Suspension System Control Using Adaptive Neuro Fuzzy (ANFIS) Controller [Volume 28, Issue 3, 2015, Pages 396-401]
  • Mohammadi, Maedeh Catalytic Effect of Metal Species on Enhancement of CO2 Gasification Reactivity of Biomass Char [Volume 28, Issue 9, 2015, Pages 1251-1256]
  • Mohammadi, Mousa Improving Performance of Mining Equipment Through Enhancement of Speed Factor: A Case Study (Research Note) [Volume 28, Issue 9, 2015, Pages 1392-1400]
  • Mohammadi, Seyed Erfan Reliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1476-1485]
  • Mohammadi Arhani, Mohammad Reza Reverse Engineering for Designing the Coupling of a 32 MW Rotor-generator by Shrink Fitting Method (TECHNICAL NOTE) [Volume 28, Issue 9, 2015, Pages 1375-1382]
  • Mohammadizadeh, Mahdi Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 567-572]
  • Mohammadkhani, Farzad A Parametric Study on Exergy and Exergoeconomic Analysis of a Diesel Engine based Combined Heat and Power System [Volume 28, Issue 4, 2015, Pages 608-617]
  • Mohammadkhani, Farzad Comparison of Single-stage and Two-stage Tubular SOFC-GT Hybrid Cycles: Energy and Exergy Viewpoints [Volume 28, Issue 4, 2015, Pages 618-626]
  • Mohammadnia, Ali More about Thermosyphone Rankine Cycle Performance Enhancement (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 642-647]
  • Mokhtari, Hadi A Particle Swarm Optimization Approach to Joint Location and Scheduling Decisions in A Flexible Job Shop Environment [Volume 28, Issue 12, 2015, Pages 1756-1764]
  • Mokhtari, Hadi A Reliability based Modelling and Optimization of an Integrated Production and Preventive Maintenance Activities in Flowshop Scheduling Problem [Volume 28, Issue 12, 2015, Pages 1774-1781]
  • Molla-Alizadeh, Saber A Reliability based Modelling and Optimization of an Integrated Production and Preventive Maintenance Activities in Flowshop Scheduling Problem [Volume 28, Issue 12, 2015, Pages 1774-1781]
  • Mollaie, Yasser Dynamic Response Analysis of the Planar and Tubular Solid Oxide Fuel Cells to the Inlet Air Mass Flow Rate Variation [Volume 28, Issue 5, 2015, Pages 794-801]
  • Moosavi, Azam Ethanol-based Tape Casting Process of the Textured Bi0.5(Na0.80K0.20)0.5TiO3-BiFeO3 Ceramics [Volume 28, Issue 4, 2015, Pages 561-566]
  • Moradi, G Frictional Strain Hardening-softening in Experimental and Numerical Investigation of Arching Effect [Volume 28, Issue 2, 2015, Pages 180-189]
  • Mosalaeifard, Amir Hossein Three-dimensional Vibration Suppression of an Euler-bernolli Beam via Boundary Control Method [Volume 28, Issue 5, 2015, Pages 755-763]
  • Moshrefzadeh-sani, Hadi A Continuum Model For Stone-wales Defected Carbon Nanotubes [Volume 28, Issue 3, 2015, Pages 433-439]
  • Mostafa gharabaghi, Ahmadreza Experimental Investigation of the Effect of Splitter Plate Angle on the Under-Scouring of Submarine Pipeline Due to Steady Current and Clear Water Condition [Volume 28, Issue 3, 2015, Pages 368-377]
  • Mou, Ruqiang Vibration Characteristics of Heavy Load Rackwith Split-hom together Structure (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 277-283]
  • Mousavi, M. Group Decision Making based on a New Evaluation Method and Hesitant Fuzzy Setting with an Application to an Energy Planning Problem [Volume 28, Issue 9, 2015, Pages 1303-1311]
  • Mousavi, S.M. A New Balancing and Ranking Method based on Hesitant Fuzzy Sets for Solving Decision-making Problems under Uncertainty [Volume 28, Issue 2, 2015, Pages 214-223]
  • Mousavi, S.M. Evaluating Construction Projects by a New Group Decision-Making Model Based on Intuitionistic Fuzzy Logic Concepts [Volume 28, Issue 9, 2015, Pages 1312-1319]
  • Mousavi Motlagh, Seyyed Hadi A Novel Objective Function for Directional Overcurrent Relays Coordination [Volume 28, Issue 2, 2015, Pages 205-213]
  • Muniyandi, Venkatesan Heat Transfer Study of Perforated Fin under Forced Convection [Volume 28, Issue 10, 2015, Pages 1500-1506]

N

  • N, SHENBAGA VINAYAGA MOORTHI Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
  • Nahavandi, N. Solving Re-entrant No-wait Flow Shop Scheduling Problem [Volume 28, Issue 6, 2015, Pages 903-912]
  • Najafi, Amir Abbas Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]
  • Najafi, Saber Investigation of Thermoelastic Damping in the Longitudinal Vibration of a Micro Beam [Volume 28, Issue 2, 2015, Pages 314-320]
  • Najafpour, Ghasem Evaluation of Cell Growth and Substrate Consumption Kinetic of Five Different Lactobacilli in a Submerged Batch Whey Culture for Lactic Acid Production [Volume 28, Issue 7, 2015, Pages 970-977]
  • Najafpour, Ghasem Hydrolysis of Sorghum (Broomcorn) in Diluted Hydrochloric Acid [Volume 28, Issue 11, 2015, Pages 1543-1551]
  • Nakhai, Isa A Particle Swarm Optimization Approach to Joint Location and Scheduling Decisions in A Flexible Job Shop Environment [Volume 28, Issue 12, 2015, Pages 1756-1764]
  • Namjoo, Moslem Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1525-1532]
  • Nasiri, N. Earth’s Magnetic Field for Spacecraft Attitude Control Applications (TECHNICAL NOTE) [Volume 28, Issue 5, 2015, Pages 648-653]
  • Nateghi, F. The Effect of Tuned Mass Damper on Seismic Response of Building Frames with Uncertain Structural Characteristics [Volume 28, Issue 5, 2015, Pages 662-670]
  • Nateghi, F. Improved Behaviour of Accordion Metallic Dampers Affected by the Increasing Number of Layers [Volume 28, Issue 6, 2015, Pages 864-870]
  • Navabi, M Earth’s Magnetic Field for Spacecraft Attitude Control Applications (TECHNICAL NOTE) [Volume 28, Issue 5, 2015, Pages 648-653]
  • NAZARPOUR, darush Assessing the Impact of Size and Site of DGs and SMs in Active Distribution Networks for Energy Losses Cost [Volume 28, Issue 7, 2015, Pages 1002-1010]
  • Nematzadeh, Hossein Deterministic Measurement of Reliability and Performance Using Explicit Colored Petri Net in Business Process Execution Language and Eflow [Volume 28, Issue 10, 2015, Pages 1439-1446]
  • Nematzadeh, Zahra Deterministic Measurement of Reliability and Performance Using Explicit Colored Petri Net in Business Process Execution Language and Eflow [Volume 28, Issue 10, 2015, Pages 1439-1446]
  • Neshat, Najmeh An Approach of Artificial Neural Networks Modeling Based on Fuzzy Regression for Forecasting Purposes [Volume 28, Issue 11, 2015, Pages 1651-1655]
  • Nezamolmolki, Davoud Free Vibration Analysis of a Sloping-frame: Closed-form Solution versus Finite Element Solution and Modification of the Characteristic Matrices (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 378-386]
  • Niaki, S.T.A. Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]
  • Niazi, Saeid Estimation of LOS Rates for Target Tracking Problems using EKF and UKF Algorithms- a Comparative Study [Volume 28, Issue 2, 2015, Pages 172-179]
  • Nikbakht Naser Abad, Sadegh Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
  • Nikfarjam, Alireza Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
  • Nikghalb, Ebrahim Multi-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft [Volume 28, Issue 4, 2015, Pages 583-592]
  • Nikoi, Reza Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
  • Noroozi, Amir A Reliability based Modelling and Optimization of an Integrated Production and Preventive Maintenance Activities in Flowshop Scheduling Problem [Volume 28, Issue 12, 2015, Pages 1774-1781]
  • Noroozi, Mohammad javad Effect of Heat Recirculation in Biomass Flame Stability within a Cylindrical Micro-Combustor (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 454-459]
  • Noroozi, Mohammad javad Investigation of the Effects of Non-Linear and Non-Homogeneous Non-Fourier Heat Conduction Equations on Temperature Distribution in a Semi-Infinite Body [Volume 28, Issue 12, 2015, Pages 1802-1807]
  • Norouzian, Musa Multi-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft [Volume 28, Issue 4, 2015, Pages 583-592]

O

  • Okonkwo, Ugochukwu Pollutants Emissions of Filling Stations and Their Impact on the Air Quality (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 949-955]
  • Omidvari, Arash Approximate Closed-form Formulae for Buckling Analysis of Rectangular Tubes under Torsion [Volume 28, Issue 8, 2015, Pages 1226-1232]
  • Onwuamaze, Ikechukwu Pollutants Emissions of Filling Stations and Their Impact on the Air Quality (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 949-955]
  • Orji, Ijioma Pollutants Emissions of Filling Stations and Their Impact on the Air Quality (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 949-955]

P

  • P, PALANISAMY Cutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools [Volume 28, Issue 7, 2015, Pages 1074-1081]
  • Pangavhane, Dilip Experimental and Theoretical Study of Thompson Seedless Grapes Drying using Solar Evacuated Tube Collector with Force Convection Method [Volume 28, Issue 12, 2015, Pages 1796-1801]
  • Parastvand, Hossein Stability and Performance Attainment with Fixed Order Controller Using Frequency Response [Volume 28, Issue 4, 2015, Pages 553-560]
  • Parhizkar, Hamid Simulation of Strap-On Boosters Separation in the Atmosphere [Volume 28, Issue 2, 2015, Pages 164-171]
  • Parpaei, Mohammad Eagle Strategy Based Maximum Power Point Tracker for Fuel Cell System [Volume 28, Issue 4, 2015, Pages 529-536]
  • Pedram, Omid Cluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE) [Volume 28, Issue 9, 2015, Pages 1336-1342]
  • Pirouzram, Omid A New Approach for Determination of Neck-Pore Size Distribution of Porous Membranes via Bubble Point Data [Volume 28, Issue 6, 2015, Pages 823-831]
  • Pirzadeh, Meisam Effects of Flight Dynamics on Performance of One Axis Gimbal System, Considering Disturbance Torques [Volume 28, Issue 8, 2015, Pages 1108-1116]
  • Pourabbas, Behzad Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 567-572]
  • Pourfallah, Mohsen Studying the Effect of Reformer Gas and Exhaust Gas Recirculation on Homogeneous Charge Compression Ignition Engine Operation [Volume 28, Issue 8, 2015, Pages 1199-1208]
  • Pourreza, Neda A Common Weight Multi-criteria Decision analysis-data Envelopment Analysis Approach with Assurance Region for Weight Derivation from Pairwise Comparison Matrices [Volume 28, Issue 12, 2015, Pages 1746-1755]
  • Poursaeidi, Esmaeil Reverse Engineering for Designing the Coupling of a 32 MW Rotor-generator by Shrink Fitting Method (TECHNICAL NOTE) [Volume 28, Issue 9, 2015, Pages 1375-1382]
  • Poursina, Mehrdad Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process [Volume 28, Issue 8, 2015, Pages 1209-1218]
  • Prasanth, Narayanan Starvation Free Scheduler for Buffered Crossbar Switches (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 523-528]

R

  • R, KARTHIKEYAN Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
  • Rahimpour, Hamid Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
  • Rahmani, Najmeh Analysis of Integral Nonlinearity in Radix-4 Pipelined Analog-to-Digital Converters [Volume 28, Issue 4, 2015, Pages 546-552]
  • Rahmanzade, Key armin Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
  • Rai, Piysh Improving Performance of Mining Equipment Through Enhancement of Speed Factor: A Case Study (Research Note) [Volume 28, Issue 9, 2015, Pages 1392-1400]
  • Rajnish, Kumar Measurement of Complexity and Comprehension of a Program Through a Cognitive Approach [Volume 28, Issue 11, 2015, Pages 1579-1588]
  • Ram, Mangey Reliability Measures Measurement under Rule-Based Fuzzy Logic Technique [Volume 28, Issue 10, 2015, Pages 1486-1492]
  • Ramin, farzin Effect of Deflected Membrane Electrode Assembly on Species Distribution in PEMFC [Volume 28, Issue 3, 2015, Pages 467-475]
  • Rana, U S Damped Vibrations of Parabolic Tapered Non-homogeneous Infinite Rectangular Plate Resting on Elastic Foundation (RESEARCH NOTE) [Volume 28, Issue 7, 2015, Pages 1082-1089]
  • Ranjbar, Faramarz Comparison of Single-stage and Two-stage Tubular SOFC-GT Hybrid Cycles: Energy and Exergy Viewpoints [Volume 28, Issue 4, 2015, Pages 618-626]
  • Rashed-Mohassel, Jalil Complementary Periodic Structures for Miniaturization of Planar Antennas [Volume 28, Issue 10, 2015, Pages 1463-1468]
  • Razmyan, Sanaz Approximate Incremental Dynamic Analysis Using Reduction of Ground Motion Records [Volume 28, Issue 2, 2015, Pages 190-197]
  • Rezaei, Aryo Aeolian Vibrations of Transmission Line Conductors with More than One Damper [Volume 28, Issue 10, 2015, Pages 1515-1524]
  • Rezaeizadeh, Masoud A New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 593-598]
  • Rezaye abbasi charkhi, Mina Process Capability Index for Logistic Regression Profile Based on Spmk Index [Volume 28, Issue 8, 2015, Pages 1186-1192]
  • Rezazad, Ata A Congested Double Path Approach for a Hub Location-allocation Problem with Service Level at Hubs [Volume 28, Issue 7, 2015, Pages 1049-1058]
  • Rezvani, Fazllolah Evaluation of Cell Growth and Substrate Consumption Kinetic of Five Different Lactobacilli in a Submerged Batch Whey Culture for Lactic Acid Production [Volume 28, Issue 7, 2015, Pages 970-977]
  • Riazi, S. Hydrolysis of Sorghum (Broomcorn) in Diluted Hydrochloric Acid [Volume 28, Issue 11, 2015, Pages 1543-1551]
  • Roushani, mahmoud Characterization of Polypyrrole-hydroxyethylcellulose/TiO2 Nanocomposite: Thermal Properties and AFM Analysis [Volume 28, Issue 5, 2015, Pages 654-661]

S

  • S, KALIDASS Cutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools [Volume 28, Issue 7, 2015, Pages 1074-1081]
  • Saberi, Miad A Continuum Shell-beam Finite Element Modeling of Buried Pipes with 90-degree Elbow Subjected to Earthquake Excitations [Volume 28, Issue 3, 2015, Pages 338-349]
  • Saboori, Behnam A Continuum Model For Stone-wales Defected Carbon Nanotubes [Volume 28, Issue 3, 2015, Pages 433-439]
  • Sadeghi, Morteza Aeolian Vibrations of Transmission Line Conductors with More than One Damper [Volume 28, Issue 10, 2015, Pages 1515-1524]
  • Sadeghi Dastaki, Mohsen Investigating Zone Pricing in a Location-Routing Problem Using a Variable Neighborhood Search Algorithm [Volume 28, Issue 11, 2015, Pages 1624-1633]
  • Sadeghijaleh, Mahdi Voltage Control Strategy for Direct-drive Robots Driven by Permanent Magnet Synchronous Motors [Volume 28, Issue 5, 2015, Pages 709-716]
  • Sadeghzadeh, Arash Discrete Multi Objective Particle Swarm Optimization Algorithm for FPGA Placement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 410-418]
  • Sadjadi, S.J. Reliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1476-1485]
  • Saeedi, Mohammad Amin Liquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes [Volume 28, Issue 11, 2015, Pages 1671-1679]
  • Safaei Mehrabani, Yavar Symmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1447-1454]
  • Safarzadeh, Hamed Optimal Design of Magnetorheological Fluid Damper Based on Response Surface Method [Volume 28, Issue 9, 2015, Pages 1359-1367]
  • Salehi, Samira Investigation of Carbon Dioxide Adsorption on Amino-Functionalized Mesoporous Silica [Volume 28, Issue 6, 2015, Pages 848-854]
  • Samadi, Farshad Active Suspension System Control Using Adaptive Neuro Fuzzy (ANFIS) Controller [Volume 28, Issue 3, 2015, Pages 396-401]
  • Sanjari, Sina Duplex Surface Treatment of AISI 1045 Steel via Plasma Nitriding of Titanized Layer [Volume 28, Issue 8, 2015, Pages 1193-1198]
  • SATHISH GANDHI, V.C. Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
  • Sattarpour, Tohid Assessing the Impact of Size and Site of DGs and SMs in Active Distribution Networks for Energy Losses Cost [Volume 28, Issue 7, 2015, Pages 1002-1010]
  • Sedaaghi, Mohammad Hossein Experimental Investigation of the Effect of Splitter Plate Angle on the Under-Scouring of Submarine Pipeline Due to Steady Current and Clear Water Condition [Volume 28, Issue 3, 2015, Pages 368-377]
  • Sedighi, Ali Reza Optimal Placement and Sizing of Fault Current Limiter in a Real Network: a Case Study (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 402-409]
  • Sepehrian, Hamid Zinc Adsorption Properties of Alginate-SBA-15 Nanocomposite [Volume 28, Issue 10, 2015, Pages 1415-1422]
  • Setak, Mostafa Investigating Zone Pricing in a Location-Routing Problem Using a Variable Neighborhood Search Algorithm [Volume 28, Issue 11, 2015, Pages 1624-1633]
  • Seyedarabi, Hadi Application of Combined Local Object Based Features and Cluster Fusion for the Behaviors Recognition and Detection of Abnormal Behaviors [Volume 28, Issue 11, 2015, Pages 1597-1604]
  • Seyed Razzaghi, Mehran Predicting the buckling Capacity of Steel Cylindrical Shells with Rectangular Stringers under Axial Loading by using Artificial Neural Networks [Volume 28, Issue 8, 2015, Pages 1154-1159]
  • Seyyedvalilu, Mir Hatef A Parametric Study on Exergy and Exergoeconomic Analysis of a Diesel Engine based Combined Heat and Power System [Volume 28, Issue 4, 2015, Pages 608-617]
  • Shafaghat, Rouzbeh Numerical Simulation of Cavitation in Mixed Flow Pump [Volume 28, Issue 6, 2015, Pages 956-963]
  • Shafiabadi, Mohammad Hossein Symmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1447-1454]
  • Shahabadi, M. Complementary Periodic Structures for Miniaturization of Planar Antennas [Volume 28, Issue 10, 2015, Pages 1463-1468]
  • Sharifi Pajaie, Hassan Ultrasonic and Microwave Pretreatment for Hydrothermal Synthesis of Nanosized SAPO-34 and Their Catalytic Performance in MTO Reaction (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 330-337]
  • Sharifzadeh, M. Artificial Neural Network Approach for Modeling of Mercury Adsorption from Aqueous Solution by Sargassum Bevanom Algae (RESEARCH NOTE) [Volume 28, Issue 8, 2015, Pages 1124-1133]
  • Sharma, Sanjeev Kumar Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling [Volume 28, Issue 8, 2015, Pages 1241-1250]
  • Shayan, M. Attitude Estimation of Nano-satellite according to Navigation Sensors using of Combination Method (TECHNICAL NOTE) [Volume 28, Issue 7, 2015, Pages 964-969]
  • Sheidaii, Mohammad Reza Comparison of the Progressive Collapse Resistance of Seismically Designed Steel Shear Wall Frames And Special Steel Moment Frames [Volume 28, Issue 6, 2015, Pages 871-879]
  • Sheikhi, Mohammad morad Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
  • Sheikhzad Saravani, Mandana Dynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers [Volume 28, Issue 9, 2015, Pages 1351-1358]
  • Shen, Jian Least Squares Support Vector Machine for Constitutive Modeling of Clay [Volume 28, Issue 11, 2015, Pages 1571-1578]
  • Shojaefard, M. H. Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1663-1670]
  • Shokati, Naser Comparison of Single-stage and Two-stage Tubular SOFC-GT Hybrid Cycles: Energy and Exergy Viewpoints [Volume 28, Issue 4, 2015, Pages 618-626]
  • Shokr, I. A Common Weight Data Envelopment Analysis Approach for Material Selection [Volume 28, Issue 6, 2015, Pages 913-921]
  • Shokrgozar, Mohammad Ali Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
  • Shrivastav, R.K. A Numerical Analysis for the Effect of Slip Velocity and Stenosis Shape on Non-Newtonian Flow of Blood (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 440-446]
  • Shukla, R. K. Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling [Volume 28, Issue 8, 2015, Pages 1241-1250]
  • Sikarwar, basant Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling [Volume 28, Issue 8, 2015, Pages 1241-1250]
  • Singh, Amit A Numerical Analysis for the Effect of Slip Velocity and Stenosis Shape on Non-Newtonian Flow of Blood (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 440-446]
  • Singh, Kulbir Singular Value Decomposition based Steganography Technique for JPEG2000 Compressed Images [Volume 28, Issue 12, 2015, Pages 1720-1727]
  • Singh, Robin Damped Vibrations of Parabolic Tapered Non-homogeneous Infinite Rectangular Plate Resting on Elastic Foundation (RESEARCH NOTE) [Volume 28, Issue 7, 2015, Pages 1082-1089]
  • Snigdh, Itu Quasi Random Deployment Strategy for Reliable Communication Backbones in Wireless Sensor Networks [Volume 28, Issue 10, 2015, Pages 1430-1438]
  • Soeparman, Sudjito Simulation Study: The Role of Area to Volume Ratio and Key Parameters in Cylindrical Micro Combustors [Volume 28, Issue 2, 2015, Pages 261-269]
  • Sogandi, Fatemeh Estimating the Time of a Step Change in Gamma Regression Profiles Using MLE Approach [Volume 28, Issue 2, 2015, Pages 224-233]
  • Sogandi, Fatemeh Isotonic Change Point Estimation in the AR(1) Autocorrelated Simple Linear Profiles [Volume 28, Issue 7, 2015, Pages 1059-1067]
  • Sohrabi, Somayrh Fe/TiO2 Catalyst for Photodegradation of Phenol in Water [Volume 28, Issue 4, 2015, Pages 499-506]
  • Soltani, Iman Eagle Strategy Based Maximum Power Point Tracker for Fuel Cell System [Volume 28, Issue 4, 2015, Pages 529-536]
  • Soltani, Roya Redundancy Allocation Combined with Supplier Selection for Design of Series-parallel Systems [Volume 28, Issue 5, 2015, Pages 730-737]
  • Soltani, Roya A Hybrid Meta-heuristic for the Dynamic Layout Problem with Transportation System Design [Volume 28, Issue 8, 2015, Pages 1175-1185]
  • Subramanian, Nithya Analysis and Experimentation of Soft Switched Interleaved Boost Converter for Photovoltaic Applications [Volume 28, Issue 10, 2015, Pages 1469-1475]
  • Sujitha, Maria Fusion of Panchromatic and Multispectral Images Using Non Subsampled Contourlet Transform and FFT Based Spectral Histogram (RESEARCH NOTE) [Volume 28, Issue 10, 2015, Pages 1455-1462]
  • Sumardiono, Siswo Microwave Pretreatment of Fresh Water Hyacinth (Eichhornia Crassipes) in Batch Anaerobic Digestion Tank (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 832-840]
  • Sun, Binbin Benefits of the Electromagnetic Actuated Valve Train in Gasoline Engine Application [Volume 28, Issue 11, 2015, Pages 1656-1662]

T

  • T, Lakshmanan Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance [Volume 28, Issue 6, 2015, Pages 932-939]
  • T, ManvelRaj Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance [Volume 28, Issue 6, 2015, Pages 932-939]
  • Taghikhani, MohammadAli Eagle Strategy Based Maximum Power Point Tracker for Fuel Cell System [Volume 28, Issue 4, 2015, Pages 529-536]
  • Taghizadeh, Majid Ultrasonic and Microwave Pretreatment for Hydrothermal Synthesis of Nanosized SAPO-34 and Their Catalytic Performance in MTO Reaction (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 330-337]
  • Tagipour kolaei, Zahra Characterization of Polypyrrole-hydroxyethylcellulose/TiO2 Nanocomposite: Thermal Properties and AFM Analysis [Volume 28, Issue 5, 2015, Pages 654-661]
  • Tahani, Masoud Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 28, Issue 5, 2015, Pages 802-811]
  • Taher, Seyed Abbas Fuzzy Approximation Model-based Robust Controller Design for Speed Control of BLDC Motor [Volume 28, Issue 3, 2015, Pages 426-432]
  • Taheri, Asghar Digital Controller Designbased on Time Domain for DC-DC Buck Converter [Volume 28, Issue 5, 2015, Pages 693-700]
  • Tamim, Hossein Unsteady Heat and Mass Transfer Near the Stagnation-point on a Vertical Permeable Surface: a Comprehensive Report of Dual Solutions [Volume 28, Issue 5, 2015, Pages 771-780]
  • Tang, Mingmin Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
  • Tasirin, Siti Masrinda Hydrodynamic Studies of Fluidized Bed Chemical Vapor Deposition Reactors to Produce Carbon Nano Tubes via Catalytic Decomposition over Co/Pd MgO [Volume 28, Issue 12, 2015, Pages 1693-1701]
  • Tasouji Hassanpour, Saeed Solving Re-entrant No-wait Flow Shop Scheduling Problem [Volume 28, Issue 6, 2015, Pages 903-912]
  • Tavakkoli-Moghaddam, Reza Design of a New Mathematical Model for Integrated Dynamic Cellular Manufacturing Systems and Production Planning [Volume 28, Issue 5, 2015, Pages 746-754]
  • Tavakkoli-Moghaddam, Reza Group Decision Making based on a New Evaluation Method and Hesitant Fuzzy Setting with an Application to an Energy Planning Problem [Volume 28, Issue 9, 2015, Pages 1303-1311]
  • Tavakkoli-Moghaddam, Reza A Quaternion Firefly Algorithm to Solve a Multi-row Facility Layout Problem (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1605-1613]
  • Tofigh, Ali Asghar Redundancy Allocation Combined with Supplier Selection for Design of Series-parallel Systems [Volume 28, Issue 5, 2015, Pages 730-737]
  • Tofigh, Ali Asghar A New Model for Fleet Assignment Problem, Case Study of Iran Air Network at Vision 2036 [Volume 28, Issue 11, 2015, Pages 1614-1623]
  • Tomar, Ravindra A New Trans-admittance-Mode Biquad Filter Suitable for Low Voltage Operation [Volume 28, Issue 12, 2015, Pages 1738-1745]
  • Tooshmalani, Mohtaram Predicting Shear Stress Distribution in Rectangular Channels Using Entropy Concept [Volume 28, Issue 3, 2015, Pages 360-367]
  • Torabi, Navid A Quaternion Firefly Algorithm to Solve a Multi-row Facility Layout Problem (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1605-1613]
  • Torabi, S. A. A Common Weight Data Envelopment Analysis Approach for Material Selection [Volume 28, Issue 6, 2015, Pages 913-921]
  • Torabi, S. A. A Common Weight Multi-criteria Decision analysis-data Envelopment Analysis Approach with Assurance Region for Weight Derivation from Pairwise Comparison Matrices [Volume 28, Issue 12, 2015, Pages 1746-1755]
  • Traore, Philippe Numerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection [Volume 28, Issue 9, 2015, Pages 1343-1350]
  • Tri Mardiani, Dini Microwave Pretreatment of Fresh Water Hyacinth (Eichhornia Crassipes) in Batch Anaerobic Digestion Tank (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 832-840]
  • TRIPATHI, RAKESH Economic Order Quantity for Deteriorating Items with Non Decreasing Demand and Shortages Under Inflation and Time Discounting [Volume 28, Issue 9, 2015, Pages 1295-1302]

U

  • Ubale, Amol Experimental and Theoretical Study of Thompson Seedless Grapes Drying using Solar Evacuated Tube Collector with Force Convection Method [Volume 28, Issue 12, 2015, Pages 1796-1801]
  • Umpuch, Chakkrit Batch Adsorption of Organic Dyes by Organo-bagasse: Carbon Content, pH Influence, Kinetics and Isotherms (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 507-515]

V

  • Vafaeian, M. A Continuum Shell-beam Finite Element Modeling of Buried Pipes with 90-degree Elbow Subjected to Earthquake Excitations [Volume 28, Issue 3, 2015, Pages 338-349]
  • Vakilian, Fateme Isotonic Change Point Estimation in the AR(1) Autocorrelated Simple Linear Profiles [Volume 28, Issue 7, 2015, Pages 1059-1067]
  • Vali, A. R. Effects of Flight Dynamics on Performance of One Axis Gimbal System, Considering Disturbance Torques [Volume 28, Issue 8, 2015, Pages 1108-1116]
  • Vazifeshenas, Yousef Investigation of Thermo-hydraulic Performance of Circular Tube Fitted with Center-cleared Twisted Tape Using CFD Modeling (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 476-482]
  • Vazifeshenas, Yousef Numerical Simulation of Cavitation in Mixed Flow Pump [Volume 28, Issue 6, 2015, Pages 956-963]
  • Velu, Chandran Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance [Volume 28, Issue 6, 2015, Pages 932-939]

W

  • Wahyudi, Slamet Simulation Study: The Role of Area to Volume Ratio and Key Parameters in Cylindrical Micro Combustors [Volume 28, Issue 2, 2015, Pages 261-269]
  • Wan, Chunhao The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
  • Wang, Hua Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
  • Wang, Shenwen Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
  • Wei, Yongqiao Vibration Characteristics of Heavy Load Rackwith Split-hom together Structure (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 277-283]
  • Widhiyanuriawan, Denny Simulation Study: The Role of Area to Volume Ratio and Key Parameters in Cylindrical Micro Combustors [Volume 28, Issue 2, 2015, Pages 261-269]
  • Wirawan, Wirawan Simulation Study: The Role of Area to Volume Ratio and Key Parameters in Cylindrical Micro Combustors [Volume 28, Issue 2, 2015, Pages 261-269]

Y

  • Yang, Hongyin Vibration of Train-Rail-Bridge Interaction Considering Rail Irregularity with Arbitrary Wavelength [Volume 28, Issue 4, 2015, Pages 516-522]
  • YanJun, Wang Research on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink [Volume 28, Issue 4, 2015, Pages 627-633]
  • Yazdani, Azad - Approximate Incremental Dynamic Analysis Using Reduction of Ground Motion Records [Volume 28, Issue 2, 2015, Pages 190-197]
  • YazdaniRad, Rahim Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
  • Yiling, Liu The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
  • Yuan, Huimin The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
  • Yue, Xuezhi Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]

Z

  • Zafarmand, Behrooz A Novel Similarity Solution of Turbulent Boundary Layer Flow over a Flat Plate [Volume 28, Issue 11, 2015, Pages 1680-1686]
  • Zaji, Amir Hossein Impact of the Confluence Angle on Flow Field and Flowmeter Accuracy in Open Channel Junctions [Volume 28, Issue 8, 2015, Pages 1145-1153]
  • Zamani, Masoud Batch Kinetics and Modeling of Alkaline Protease Production by Isolated Bacillus sp. (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 841-847]
  • Zangeneh, Erfan Reliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1476-1485]
  • Zhang, Hailong Vibration of Train-Rail-Bridge Interaction Considering Rail Irregularity with Arbitrary Wavelength [Volume 28, Issue 4, 2015, Pages 516-522]
  • Zhong, Zhixian An Improved N-dimensional NURBs-based Metamodel [Volume 28, Issue 8, 2015, Pages 1219-1225]
  • Zhong, Zhixian H∞ Robust Controller Design and Experimental Analysis of Active Magnetic Bearings with Flexible Rotor System [Volume 28, Issue 8, 2015, Pages 1233-1240]
  • Zhou, Xuejun Least Squares Support Vector Machine for Constitutive Modeling of Clay [Volume 28, Issue 11, 2015, Pages 1571-1578]
  • Zhu, changsheng H∞ Robust Controller Design and Experimental Analysis of Active Magnetic Bearings with Flexible Rotor System [Volume 28, Issue 8, 2015, Pages 1233-1240]
  • Ziapour, Behrooz More about Thermosyphone Rankine Cycle Performance Enhancement (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 642-647]
  • Zolfaghari, Mahdi Fuzzy Approximation Model-based Robust Controller Design for Speed Control of BLDC Motor [Volume 28, Issue 3, 2015, Pages 426-432]
  • Zoraghi, Nima Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]