International Journal of Engineering

Author Index

A

A, Shamila Stability Assessment Metamorphic Approach (SAMA) for Effective Scheduling based on Fault Tolerance in Computational Grid [Volume 27, Issue 5, 2014, Pages 699-708]
Abbas, Faheem Reliability Analysis of Three Elements Series and Parallel Systems under Time-varying Fuzzy Failure Rate [Volume 27, Issue 4, 2014, Pages 553-560]
Abbasnejad, Behrokh Stability Analysis in Parametrically Excited Electrostatic Torsional Micro-actuators [Volume 27, Issue 3, 2014, Pages 487-498]
Abd El-Hamid, M. Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]
Abdo, Maher Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism [Volume 27, Issue 1, 2014, Pages 157-170]
Abdollahi, Parvin An Iterative Decision Rule to minimize cost of Acceptance Sampling Plan in Machine Replacement Problem [Volume 27, Issue 7, 2014, Pages 1099-1106]
Abdollahzade, Majid Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]
Abdollahzadeh, Gholamreza Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 293-306]
Abedi, Saeed An Intelligent Algorithm based Controller for Multiple Output DC-DC Converters with Voltage Mode Weighting Factor [Volume 27, Issue 6, 2014, Pages 889-898]
Abolghasemi, A.H. A Size-dependent Bernoulli-Euler Beam Formulation based on a New Model of Couple Stress Theory [Volume 27, Issue 6, 2014, Pages 951-960]
Adibee, Nabiollah An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
Afjei, Ebrahim Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor [Volume 27, Issue 1, 2014, Pages 143-156]
Ahmadi, Elham Optimal Process Adjustment with Considering Variable Costs for Uni-variate and Multi-variate Production Process (RESEARCH NOTE) [Volume 27, Issue 4, 2014, Pages 561-572]
Ahmadikia, Hossein Analytical Analysis of The Dual-phase-lag Heat Transfer Equation in a Finite Slab with Periodic Surface Heat Flux (RESEARCH NOTE) [Volume 27, Issue 6, 2014, Pages 971-978]
Ahmadzadehtalatapeh, Mohammad Performance Study of a Solar Integrated Central Heating System of a Residential Building Using Trnsys- an Hourly Simulation Model (RESEARCH NOTE) [Volume 27, Issue 3, 2014, Pages 457-466]
Ajemba, Regina Adsorption of Malachite Green from Aqueous Solution using Activated Ntezi Clay: Optimization, Isotherm and Kinetic Studies [Volume 27, Issue 6, 2014, Pages 839-854]
Akbari Foroud, Asghar Discrimination of Power Quality Distorted Signals Based on Time-frequency Analysis and Probabilistic Neural Network [Volume 27, Issue 6, 2014, Pages 881-888]
AkbarpourShirazi, Mohsen An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
Akbarzade, S. Experimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid [Volume 27, Issue 2, 2014, Pages 333-340]
Akhavan Behabadi, M.A. Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube [Volume 27, Issue 2, 2014, Pages 341-348]
Akhbari Varkani, Mohsen A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
Alaei, Saeed Designing of Supply Chain Coordination Mechanism with Leadership Considering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1888-1896]
Alemzadeh, Iran Influence of Glycerol and Clay Contents on Biodegradability of Corn Starch Nanocomposites [Volume 27, Issue 2, 2014, Pages 203-214]
Alimohammadi, Mahdiyeh Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
Alizadeh, Mehdi Improvement of the Solvent Extraction of Rhenium from Molybdenite Roasting Dust Leaching Solution using Counter-current Extraction by a Mixer-settler Extractor (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 651-658]
Amirataee, Babak Assessment of Goodness of Fit Methods in Determining the Best Regional Probability Distribution of Rainfall Data [Volume 27, Issue 10, 2014, Pages 1537-1546]
Amiri, I. Evaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE) [Volume 27, Issue 2, 2014, Pages 307-314]
Amiri, Saeed Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
Amirian, Homa Multi-objective Differential Evolution for the Flow shop Scheduling Problem with a Modified Learning Effect [Volume 27, Issue 9, 2014, Pages 1395-1404]
Anbia, Mansoor Synthesis of Ethylenediamine-modified Ordered Mesoporous Carbon as a New Nanoporous Adsorbent for Removal of Cu(II) and Pb(II) Ions from Aqueous Media [Volume 27, Issue 9, 2014, Pages 1415-1422]
Anbia, Mansoor Novel Amine Modified Nanoporous SBA-15 Sorbent for the Removal of H2S from Gas Streams in the Presence of CH4 (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1697-1704]
Anisheh, Mahmoud An Improved Automatic EEG Signal Segmentation Method based on Generalized Likelihood Ratio [Volume 27, Issue 7, 2014, Pages 1015-1022]
AR, Umayal Sundari Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector [Volume 27, Issue 5, 2014, Pages 811-818]
Arabi, Amana Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
Ardeshir, Gholamreza Dual Phase Detector Based Delay Locked Loop for High Speed Applications [Volume 27, Issue 4, 2014, Pages 517-522]
Ardeshir, Gholamreza Using a Novel Concept of Potential Pixel Energy for Object Tracking [Volume 27, Issue 7, 2014, Pages 1023-1032]
Arvan, Mohammad Reza Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism [Volume 27, Issue 1, 2014, Pages 157-170]
Asadi Yousef-abad, S. Kobra Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
Asgharpour, Somayeh Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
Ashrafzadeh, Fedra Introducing Padded Wall to Reduce Sloshing Induced Wall Pressure in Water Storage Tanks [Volume 27, Issue 12, 2014, Pages 1823-1831]
Ashtari, parviz Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
Askarizadeh, Hossein Analytical Analysis of The Dual-phase-lag Heat Transfer Equation in a Finite Slab with Periodic Surface Heat Flux (RESEARCH NOTE) [Volume 27, Issue 6, 2014, Pages 971-978]
Attarian, Saeid Surface Pressure Contour Prediction Using a GRNN Algorithm [Volume 27, Issue 6, 2014, Pages 819-828]
Azadi, Arman A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
Azadi, Mahboobeh Effect of Temperature and Gas Flux on the Mechanical Behavior of TiC Coating by Pulsed DC Plasma Enhanced Chemical Vapor Deposition(TECHNICAL NOTE) [Volume 27, Issue 8, 2014, Pages 1243-1250]
Azami, Hamed An Improved Automatic EEG Signal Segmentation Method based on Generalized Likelihood Ratio [Volume 27, Issue 7, 2014, Pages 1015-1022]
Azari, Mehdi Zone-3 Impadance Reach Setting of Distance Relays by Including In-feed Current Effects in an Adaptive Scheme [Volume 27, Issue 7, 2014, Pages 1051-1060]
Azid, Ishak Abd House of Improvement Model to Enhance Prioritisation of Solutions in Decision Making: a Case Study [Volume 27, Issue 8, 2014, Pages 1195-1204]
Azizi, Jaber Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]
Azizi, Jamal Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]

B

Babaei, Masome Sadat Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]
Babaei, Mehdi Novel Amine Modified Nanoporous SBA-15 Sorbent for the Removal of H2S from Gas Streams in the Presence of CH4 (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1697-1704]
BABU, SAMUEL A Closed Loop Control of Quadratic Boost Converter Using PID Controller [Volume 27, Issue 11, 2014, Pages 1653-1662]
Badiei, Elaheh Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
Bagheri, Ahmad Meshless Local Petrov-Galerkin Method for Elasto-Static Analysis of Thick-Walled Isotropic Laminated Cylinders [Volume 27, Issue 11, 2014, Pages 1731-1740]
Bagheri, Mozhgan Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
Baghmolaei, M.M. Operation Analysis of Rotary Tools of Compressor Station Using Exergy Approach [Volume 27, Issue 12, 2014, Pages 1815-1822]
Baharvandi, Hamid reza Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
Bakhshandeh, Mohammad Reza Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
Bakhshi, saeed reza Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
Baleghi Damavandi, Yasser On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]
Baniamerian, Zahra Simulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1928-1935]
Baradaran, Gholam Hossein Meshless Local Petrov-Galerkin Method for Elasto-Static Analysis of Thick-Walled Isotropic Laminated Cylinders [Volume 27, Issue 11, 2014, Pages 1731-1740]
Bashiri, Mahdi Multi-criteria Logistic Hub Location by Network Segmentation under Criteria Weights Uncertainty (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1205-1214]
Basu, S. K. Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
Bazoobandi, Hojjat Allah A Differential Evolution and Spatial Distribution based Local Search for Training Fuzzy Wavelet Neural Network [Volume 27, Issue 8, 2014, Pages 1185-1194]
Behroozifar, Mahmoud Numerical Solution of Optimal Control of Time-varying Singular Systems via Operational Matrices [Volume 27, Issue 4, 2014, Pages 523-532]
Beidaghy Dizaji, Hossein An Analytical Model for Flame Propagation through Moist Lycopodium Particles with Non-unity Lewis Number [Volume 27, Issue 5, 2014, Pages 793-802]
Belahssen, Okba Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
Ben aissia, Habib Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
Benramache, Said Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
Bensahal, Djamel Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
Bhaskar, K Effect of Abrasion Process on Reflectance Factor and Color Change of Chenille Woven Fabrics [Volume 27, Issue 8, 2014, Pages 1317-1324]
Borhani, Gholam hossein Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
Borji, Sadegh A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
Borjini, Naceur Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
Boroumandnia, Arezou Effect of TiO2 Nanofiber Density on Organic-Inorganic Based Hybrid Solar Cells (RESEARCH NOTE) [Volume 27, Issue 7, 2014, Pages 1133-1138]

C

Chala, Abdelouahed Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
Cheraghi Kootiani, Reza Investigation of a Powerful Tool for the Development of Thinly Bedded Carbonate Reservoirs (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1936-1943]
Choupani, Naghdali A New Comparative Method To Evaluate the Fracture Properties of Laminated Composite [Volume 27, Issue 6, 2014, Pages 991-1004]
C.V, Subramanian Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector [Volume 27, Issue 5, 2014, Pages 811-818]

D

Dadras, Mahmoud Reza A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
Daneshfar, Leila An Inventory Model for Deteriorating Items Using Vendor-Managed Inventory Policy [Volume 27, Issue 7, 2014, Pages 1081-1090]
Dardel, Morteza Stabilization and Walking Control for a Simple Passive Walker Using Computed Torque Method (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1777-1786]
Dashti, Hamide Comparative Investigation of Half-mode SIW Cavity and Microstrip Hybrid Antenna Using Different Patch Shapes [Volume 27, Issue 10, 2014, Pages 1573-1580]
Davari, Ali Surface Pressure Contour Prediction Using a GRNN Algorithm [Volume 27, Issue 6, 2014, Pages 819-828]
Davarnejad, reza Modeling of TiO2-water Nanofluid Effect on Heat Transfer and Pressure Drop [Volume 27, Issue 2, 2014, Pages 195-202]
Davarnejad, reza Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]
David, Deebak Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]
Dehghan, Hosein Detection of Alzheimer\\\\\\\'s Disease using Multitracer Positron Emission Tomography Imaging [Volume 27, Issue 1, 2014, Pages 51-56]
Dehghanian, R. A Hysteretic Two-phase Supply Modulator for Envelope Tracking RF Power Amplifiers [Volume 27, Issue 12, 2014, Pages 1832-1840]
Derakhshan, Mostafa A New Intelligent Controller for Parallel DC/DC Converters [Volume 27, Issue 1, 2014, Pages 131-142]
Dhouibi, Hedi Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
Dodangeh, Ali Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
Dubini, Gabriele A Study on Ratio of Loss to Storage Modulus for the Blood Clot [Volume 27, Issue 8, 2014, Pages 1167-1172]

E

E, Natarajan An Investigation of Temperature Effects on Solar Photovoltaic Cells and Modules [Volume 27, Issue 11, 2014, Pages 1713-1722]
Eftekhari, Mahdi A Differential Evolution and Spatial Distribution based Local Search for Training Fuzzy Wavelet Neural Network [Volume 27, Issue 8, 2014, Pages 1185-1194]
Eftekhari, Malihe Crack Detection In Functionally Graded Beams Using Conjugate Gradient Method [Volume 27, Issue 3, 2014, Pages 367-374]
Eftekhari, Mojtaba Crack Detection In Functionally Graded Beams Using Conjugate Gradient Method [Volume 27, Issue 3, 2014, Pages 367-374]
El-damcese, Medhat Reliability Analysis of Three Elements Series and Parallel Systems under Time-varying Fuzzy Failure Rate [Volume 27, Issue 4, 2014, Pages 553-560]
El-Ghamry, Eman Reliability Analysis of Three Elements Series and Parallel Systems under Time-varying Fuzzy Failure Rate [Volume 27, Issue 4, 2014, Pages 553-560]
El-wazery, mahmoud Fabrication and Characteristics of 8YSZ/Ni functionally Graded Materials by Applying Spark Plasma Sintering Procedure (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1907-1912]
Emamjomeh, Hossein Entropy-based Serviceability Assessment of Water Distribution Networks, Subjected to Natural and Man-Made Hazards [Volume 27, Issue 5, 2014, Pages 675-688]
Esfandyari, Ramin The Effects of Internal and External Stiffeners on Hysteretic Behavior of Steel Beam to CFT Column Connections [Volume 27, Issue 7, 2014, Pages 1005-1014]
Esmaeili, Sareh Development of a Predictive Finite Element Model For Investigation of Phases Behavior After Cold Rolling Process [Volume 27, Issue 3, 2014, Pages 425-430]
Esmaileyan, Zeynab A Database for Automatic Persian Speech Emotion Recognition: Collection, Processing and Evaluation [Volume 27, Issue 1, 2014, Pages 79-90]
Eydi, Ali Reza Modeling of the Capacitated Single Allocation Hub Location Problem with a Hierarchical Approch (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 573-586]

F

Faghidian, S. Ali Analytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks using four Engineering Beam Theories [Volume 27, Issue 6, 2014, Pages 979-990]
Faiz, Jawad. Exact Modeling and Simulation of Saturated Induction Motors with Broken Rotor Bars Fault using Winding Function Approach [Volume 27, Issue 1, 2014, Pages 69-78]
Fakharian, Mohammad Mehdi A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
Fakhrzad, M.B. Modeling the Time Windows Vehicle Routing Problem in Cross-Docking Strategy Using Two Meta-Heuristic Algorithms [Volume 27, Issue 7, 2014, Pages 1113-1126]
Fakhrzad, M.B. Outsourcing through Three-dimensional Competition [Volume 27, Issue 12, 2014, Pages 1863-1871]
Faraji Dizaji, Farzad An Analytical Model for Flame Propagation through Moist Lycopodium Particles with Non-unity Lewis Number [Volume 27, Issue 5, 2014, Pages 793-802]
Farhadi, M. Experimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid [Volume 27, Issue 2, 2014, Pages 333-340]
Fariba, F. A New Technique based on Strain Energy for Correction of Stress-strain Curve [Volume 27, Issue 8, 2014, Pages 1287-1296]
Farrahi, G. H. Analytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks using four Engineering Beam Theories [Volume 27, Issue 6, 2014, Pages 979-990]
Farshidi, Ebrahim A New Approach for Low Voltage CMOS based on Current-controlled Conveyors [Volume 27, Issue 5, 2014, Pages 723-730]
Fatehi Kivi, Amir Three Meta-heuristic Algorithms for the Single-item Capacitated Lot-sizing Problem (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1223-1232]
Fathy, Adel Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]

G

Ganjali, Monireh Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
Garmeyi, yoones Multi-criteria Logistic Hub Location by Network Segmentation under Criteria Weights Uncertainty (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1205-1214]
Garmsiri, Naghmeh A New Intelligent Approach to Patient-cooperative Control of Rehabilitation Robots [Volume 27, Issue 3, 2014, Pages 467-474]
G. Golzar, Farzin Hydroelastic Vibration of a Circular Diaphragm in the Fluid Chamber of a Reciprocating Micro Pump [Volume 27, Issue 4, 2014, Pages 643-650]
Ghachem, Kaouther Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
Ghaderi, Reza Perfect Tracking of Supercavitating Non-minimum Phase Vehicles Using a New Robust and Adaptive Parameter-optimal Iterative Learning Control [Volume 27, Issue 7, 2014, Pages 1071-1080]
Ghadimi, Behnam Optimization of Double Pipe Fin-pin Heat Exchanger Using Entropy Generation Minimization [Volume 27, Issue 9, 2014, Pages 1431-1438]
GHADIMI, NORADIN Radial Basis Neural Network Based Islanding Detection in Distributed Generation [Volume 27, Issue 7, 2014, Pages 1061-1070]
Ghafari, Esmaeel Appling Metaheuristic Algorithms on a Two Stage Hybrid Flowshop Scheduling Problem with Serial Batching (RESEARCH NOTE) [Volume 27, Issue 6, 2014, Pages 899-910]
Gharebagh, vahid Hydroelastic Vibration of a Circular Diaphragm in the Fluid Chamber of a Reciprocating Micro Pump [Volume 27, Issue 4, 2014, Pages 643-650]
Ghasemlu, Sadjad Simulation of Store Separation using Low-cost CFD with Dynamic Meshing [Volume 27, Issue 5, 2014, Pages 775-784]
Ghasemzadeh, Mohammad Reduction of Computational Complexity in Finite State Automata Explosion of Networked System Diagnosis (RESEARCH NOTE) [Volume 27, Issue 1, 2014, Pages 29-32]
Ghassemi, Hassan A Fast Immersed Boundary Fourier Pseudo-spectral Method for Simulation of the Incompressible Flows [Volume 27, Issue 9, 2014, Pages 1457-1466]
Ghobadi, Changiz Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE) [Volume 27, Issue 10, 2014, Pages 1565-1572]
Ghodratnama, Ali Analytic Network Process Based Strategic Planning for Iran's Trade Promotion Organization [Volume 27, Issue 8, 2014, Pages 1215-1222]
Ghodratnama, Ali Assessment of Improvement of Preventive Maintenance Systems Related to the Civil Projects Using Concepts of Value Engineering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1872-1878]
Gholami, Mohammad Dual Phase Detector Based Delay Locked Loop for High Speed Applications [Volume 27, Issue 4, 2014, Pages 517-522]
Gholamzadeh, Sanaz Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
Gholizade-Narm, Hossein A Novel Fuzzy Based Method for Heart Rate Variability Prediction [Volume 27, Issue 7, 2014, Pages 1041-1050]
Gholizade-Narm, Hossein A Novel Control Strategy for a Single-phase Grid-connected Power Injection System [Volume 27, Issue 12, 2014, Pages 1841-1849]
Ghomashi, Mohammad Javad An Investigate on Power, Torque and Exhaust Gas Emission Variation: Effect of Hydroxy Gas Addition to Inlet Air of a SI Engine [Volume 27, Issue 11, 2014, Pages 1751-1756]
Ghorbanian, Vahid Exact Modeling and Simulation of Saturated Induction Motors with Broken Rotor Bars Fault using Winding Function Approach [Volume 27, Issue 1, 2014, Pages 69-78]
Ghoreyshi, Ali Asghar Adsorption of Phenolic Compounds onto the Activated Carbon Synthesized from Pulp and Paper Mill Sludge: Equilibrium Isotherm, Kinetics, Thermodynamics and Mechanism Studies [Volume 27, Issue 10, 2014, Pages 1485-1494]
Gohari, Maryam An Experimental Study on the Thermal Conductivity of Carbon Nanotubes/Oil (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 411-416]
Golbakhshi, Hossein Finite Element Analysis for Estimating the Effect of Various Working Conditions on the Temperature Gradients Created Inside a Rolling Tire [Volume 27, Issue 12, 2014, Pages 1920-1927]
Gorji, Mofid Optimal Thermodynamic Design of Turbofan Engines using Multi-objective Genetic Algorithm [Volume 27, Issue 6, 2014, Pages 961-970]
Gorji, Mofid Uncertainties due to Fuel Heating Value and Burner Efficiency on Performance Functions of Turbofan Engines Using Monte Carlo Simulation [Volume 27, Issue 7, 2014, Pages 1139-1148]
Goshtasbi Rad, Ebrahim Experimental Investigation of Mixed Convection Heat Transfer in Vertical Tubes by Nanofluid: Effects of Reynolds Number and Fluid Temperature [Volume 27, Issue 8, 2014, Pages 1251-1258]
Goudarzi, Koorosh Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
Guan, Zhichuan Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]

H

Habibi Davijani, Ali Synthesis of Ethylenediamine-modified Ordered Mesoporous Carbon as a New Nanoporous Adsorbent for Removal of Cu(II) and Pb(II) Ions from Aqueous Media [Volume 27, Issue 9, 2014, Pages 1415-1422]
HADDADNIA, JAVAD Speech Enhancement using Laplacian Mixture Model under Signal Presence Uncertainty [Volume 27, Issue 9, 2014, Pages 1367-1376]
Hadiyanto, Hady Phytoremediation of Palm Oil Mill Effluent by using Pistia Stratiotes Plant and Algae Spirulina sp for Biomass Production (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1809-1814]
Hafezalkotob, Ashkan Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]
Hajipour, Alireza Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
Hajipour, Vahid A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
Hakim, Manoochehr Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
Halali, Mohammad Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
Harimi, Ali A Database for Automatic Persian Speech Emotion Recognition: Collection, Processing and Evaluation [Volume 27, Issue 1, 2014, Pages 79-90]
Hassan, Ahmed Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]
Hassan Ghasemi, Mohammad Stabilization and Walking Control for a Simple Passive Walker Using Computed Torque Method (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1777-1786]
Hassani, Maryam The Possibility of using Flat Plate Solar Collector Based on the Best Calculated Tilt Angle in the City of Rasht as a Case Study (TECHNICAL NOTE) [Volume 27, Issue 8, 2014, Pages 1297-1306]
Hassani, Messaoud Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
Hassanpour, Hamid Image Zooming using Non-linear Partial Differential Equation [Volume 27, Issue 1, 2014, Pages 15-28]
Hassanpour, Hamid Detection of Alzheimer\\\\\\\'s Disease using Multitracer Positron Emission Tomography Imaging [Volume 27, Issue 1, 2014, Pages 51-56]
Hassanpour, Hamid An Improved Automatic EEG Signal Segmentation Method based on Generalized Likelihood Ratio [Volume 27, Issue 7, 2014, Pages 1015-1022]
Hassanpour, Hamid Image Denoising Using Anisotropic Diffusion Equations on Reflection and illumination Components of Image [Volume 27, Issue 9, 2014, Pages 1339-1348]
Hatami, Tahmasb Application of three Types of Dryers Namely Tunnel, Fluidized Bed, and Fluidized Bed with Microwave for Drying of Celery, Corn, and Sour Cherry: Experiments and Modeling (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 667-674]
Heidari, Masuod A New Method for Root Detection in Minirhizotron Images: Hypothesis Testing Based on Entropy-Based Geometric Level Set Decision [Volume 27, Issue 1, 2014, Pages 91-100]
Hessampour, karim Dimensionality Reduction and Improving the Performance of Automatic Modulation Classification using Genetic Programming (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 709-714]
Heydari, Amir Influence of Glycerol and Clay Contents on Biodegradability of Corn Starch Nanocomposites [Volume 27, Issue 2, 2014, Pages 203-214]
Heydari, Mohammad Hoseein A New Comparative Method To Evaluate the Fracture Properties of Laminated Composite [Volume 27, Issue 6, 2014, Pages 991-1004]
Hosseinalipoor, S. M. Steady Flow Analysis and Modeling of the Gas Distribution Network Using the Electrical Analogy (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1269-1276]
Hosseini, M. Entropy-based Serviceability Assessment of Water Distribution Networks, Subjected to Natural and Man-Made Hazards [Volume 27, Issue 5, 2014, Pages 675-688]
Hosseini, Mohammad Crack Detection In Functionally Graded Beams Using Conjugate Gradient Method [Volume 27, Issue 3, 2014, Pages 367-374]
Hosseini, Rahil A Fuzzy Rule-based Expert System for the Prognosis of the Risk of Development of the Breast Cancer [Volume 27, Issue 10, 2014, Pages 1557-1564]
Hosseinirad, Seyed Mojtaba Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
Hosseinzadeh, Mostafa Improvement of the Solvent Extraction of Rhenium from Molybdenite Roasting Dust Leaching Solution using Counter-current Extraction by a Mixer-settler Extractor (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 651-658]

I

Iranmanesh, Seyyed Hossein Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]

J

Jaefarzadeh, Mohammad Reza Hydraulic Analysis of Water Supply Networks using a Modified Hardy Cross Method [Volume 27, Issue 9, 2014, Pages 1331-1338]
Jafari, Mostafa Simulation of Store Separation using Low-cost CFD with Dynamic Meshing [Volume 27, Issue 5, 2014, Pages 775-784]
Jafarmadar, Samad Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under Improved Exhaust Gas Recirculation [Volume 27, Issue 3, 2014, Pages 449-456]
Jafarsadeghi-pournaki, Ilgar Static Pull-in Analysis of Capacitive FGM Nanocantilevers Subjected to Thermal Moment using Eringen’s Nonlocal Elasticity [Volume 27, Issue 4, 2014, Pages 633-642]
Jalili, Soheil A Node-based Mathematical Model towards the Location Routing Problem with Intermediate Replenishment Facilities under Capacity Constraint [Volume 27, Issue 6, 2014, Pages 911-920]
Jamil, M. Structural and Functional Analysis of an Industrial, Flexible, and Demountable Wall Panel System (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 247-260]
Jamili, Amin Train Scheduling Problem with Consideration of Praying Constraint as an Application of Job Shop Scheduling Problem [Volume 27, Issue 7, 2014, Pages 1091-1098]
Javadian, Nikbakhsh Designing a Meta-Heuristic Algorithm Based on a Simple Seeking Logic [Volume 27, Issue 10, 2014, Pages 1601-1610]
Javid, A. H. A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
Jomehzadeh, Emad Length Scale Effect on Vibration Analysis of Functionally Graded Kirchhoff and Mindlin Micro-Plates [Volume 27, Issue 3, 2014, Pages 431-440]
Joseph, Rubert Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]

K

K, BASKARAN Stability Assessment Metamorphic Approach (SAMA) for Effective Scheduling based on Fault Tolerance in Computational Grid [Volume 27, Issue 5, 2014, Pages 699-708]
Kadkhodayan, Mehran An Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene [Volume 27, Issue 3, 2014, Pages 349-358]
Kadkhodayan, Mehran A Study on Combination of von Mises and Tresca Yield Loci In Non-Associated Viscoplasticity [Volume 27, Issue 3, 2014, Pages 441-448]
Kadkhodayan, Mehran Elastic/plastic Buckling Analysis of Skew Thin Plates based on Incremental and Deformation Theories of Plasticity using Generalized Differential Quadrature Method [Volume 27, Issue 8, 2014, Pages 1277-1286]
Kamali, Hamid Reza Deterministic and Metaheuristic Solutions for Closed-loop Supply Chains with Continuous Price Decrease [Volume 27, Issue 12, 2014, Pages 1897-1906]
Kamaruddin, Shahrul House of Improvement Model to Enhance Prioritisation of Solutions in Decision Making: a Case Study [Volume 27, Issue 8, 2014, Pages 1195-1204]
Kangi, Fatemeh A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
Karami, Farzad Tracking and Shape Control of a Micro-cantilever using Electrostatic Actuation [Volume 27, Issue 9, 2014, Pages 1439-1448]
Karimi, Hossein A Node-based Mathematical Model towards the Location Routing Problem with Intermediate Replenishment Facilities under Capacity Constraint [Volume 27, Issue 6, 2014, Pages 911-920]
Kazemi, Admin Optimal Thermodynamic Design of Turbofan Engines using Multi-objective Genetic Algorithm [Volume 27, Issue 6, 2014, Pages 961-970]
Kazemi, Admin Uncertainties due to Fuel Heating Value and Burner Efficiency on Performance Functions of Turbofan Engines Using Monte Carlo Simulation [Volume 27, Issue 7, 2014, Pages 1139-1148]
Kazemi, Ahmad Assessment of Improvement of Preventive Maintenance Systems Related to the Civil Projects Using Concepts of Value Engineering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1872-1878]
KERAMATZADEH, Alireza A New Approach for Low Voltage CMOS based on Current-controlled Conveyors [Volume 27, Issue 5, 2014, Pages 723-730]
Keyvanpour, Mohammadreza Document Image Retrieval Based on Keyword Spotting Using Relevance Feedback [Volume 27, Issue 1, 2014, Pages 7-14]
Khademi Zare, Hasan A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
Khademi Zare, Hasan Deterministic and Metaheuristic Solutions for Closed-loop Supply Chains with Continuous Price Decrease [Volume 27, Issue 12, 2014, Pages 1897-1906]
Khakpour, Fazollah Using a Novel Concept of Potential Pixel Energy for Object Tracking [Volume 27, Issue 7, 2014, Pages 1023-1032]
Khakshournia, Sharif Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
Khalil Arya, S. Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under Improved Exhaust Gas Recirculation [Volume 27, Issue 3, 2014, Pages 449-456]
Khalili, Saeed Hotel Location Problem Using Erlang Queuing Model under Uncertainty (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1879-1887]
Khalkhali, Abolfazl Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
Khamforoush, Mehrdad Application of three Types of Dryers Namely Tunnel, Fluidized Bed, and Fluidized Bed with Microwave for Drying of Celery, Corn, and Sour Cherry: Experiments and Modeling (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 667-674]
KHAYAT, MORTEZA Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube [Volume 27, Issue 2, 2014, Pages 341-348]
Khayati, Gholam Reza Studying of Heat Treatment Influence on Corrosion Behavior of AA6061-T6 by Taguchi Method [Volume 27, Issue 9, 2014, Pages 1423-1430]
Khezri, M. A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
Khezri, Razieh A Fuzzy Rule-based Expert System for the Prognosis of the Risk of Development of the Breast Cancer [Volume 27, Issue 10, 2014, Pages 1557-1564]
Khodadadi, M Optimal Thermodynamic Design of Turbofan Engines using Multi-objective Genetic Algorithm [Volume 27, Issue 6, 2014, Pages 961-970]
Khodadadi, M Uncertainties due to Fuel Heating Value and Burner Efficiency on Performance Functions of Turbofan Engines Using Monte Carlo Simulation [Volume 27, Issue 7, 2014, Pages 1139-1148]
Khosravi, Mohammad Hossein Image Denoising Using Anisotropic Diffusion Equations on Reflection and illumination Components of Image [Volume 27, Issue 9, 2014, Pages 1339-1348]
Korani, Ehsan Modeling of the Capacitated Single Allocation Hub Location Problem with a Hierarchical Approch (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 573-586]
Kouhi, Sajjad Economic Aspect of Fuel Cell Power as Distributed Generation [Volume 27, Issue 1, 2014, Pages 57-62]
Kumar, Vinod Region Completion in a Texture using Multiresolution Transforms [Volume 27, Issue 5, 2014, Pages 747-756]

L

Latif, Alimohammad Dimensionality Reduction and Improving the Performance of Automatic Modulation Classification using Genetic Programming (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 709-714]
Li, Ya-fei Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
Liouane, Noureddine Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
Lotfollahi, Mohammad Nader A Procedure for Preparation of Semi-activated Carbon Fiber without any Treatment under High Temperature [Volume 27, Issue 10, 2014, Pages 1519-1526]
Low, Shye-Nee House of Improvement Model to Enhance Prioritisation of Solutions in Decision Making: a Case Study [Volume 27, Issue 8, 2014, Pages 1195-1204]

M

M, HENA RESCUE: Reputation based Service for Cloud User Environment [Volume 27, Issue 8, 2014, Pages 1179-1184]
M, ranjani A Robust STATCOM Controller using Particle Swarm Optimization [Volume 27, Issue 5, 2014, Pages 731-738]
M A, Saleem durai RESCUE: Reputation based Service for Cloud User Environment [Volume 27, Issue 8, 2014, Pages 1179-1184]
Maatki, Chemseddine Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
Madinei, Hadi Effect of Length-scale Parameter on Pull-in Voltage and Natural Frequency of a Micro-plate [Volume 27, Issue 3, 2014, Pages 375-384]
Madinei, Hadi Static Pull-in Analysis of Capacitive FGM Nanocantilevers Subjected to Thermal Moment using Eringen’s Nonlocal Elasticity [Volume 27, Issue 4, 2014, Pages 633-642]
Madoliat, R. Steady Flow Analysis and Modeling of the Gas Distribution Network Using the Electrical Analogy (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1269-1276]
Mahmoodabadi, Mohammad Javad Meshless Local Petrov-Galerkin Method for Elasto-Static Analysis of Thick-Walled Isotropic Laminated Cylinders [Volume 27, Issue 11, 2014, Pages 1731-1740]
Mahmoudi, Reza Introducing Padded Wall to Reduce Sloshing Induced Wall Pressure in Water Storage Tanks [Volume 27, Issue 12, 2014, Pages 1823-1831]
Mahmoudzadeh, S. An Optimized PID for Capsubots using Modified Chaotic Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1377-1384]
Majidzadeh, Maryam Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE) [Volume 27, Issue 10, 2014, Pages 1565-1572]
Makui, A. A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
Malekpoor, Mohammad Reza Behavior of Compacted Lime-soil Columns [Volume 27, Issue 2, 2014, Pages 315-324]
Mandal, Amritakar Design and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE) [Volume 27, Issue 10, 2014, Pages 1581-1590]
Mardi Kolur, Mohsen Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under Improved Exhaust Gas Recirculation [Volume 27, Issue 3, 2014, Pages 449-456]
Marzban, Ehsan AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 763-768]
Masomi, Mojtaba Adsorption of Phenolic Compounds onto the Activated Carbon Synthesized from Pulp and Paper Mill Sludge: Equilibrium Isotherm, Kinetics, Thermodynamics and Mechanism Studies [Volume 27, Issue 10, 2014, Pages 1485-1494]
Mazinani, Mahdi A Fuzzy Rule-based Expert System for the Prognosis of the Risk of Development of the Breast Cancer [Volume 27, Issue 10, 2014, Pages 1557-1564]
Mehdikhani, Behzad Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
Mehdipour, Ramin Simulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1928-1935]
Mehdizadeh, Esmaeil Three Meta-heuristic Algorithms for the Single-item Capacitated Lot-sizing Problem (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1223-1232]
MHAMDI, Lotfi Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
Minaeian, S. Prediction of Deformation of Circular Plates Subjected to Impulsive Loading Using GMDH-type Neural Network [Volume 27, Issue 10, 2014, Pages 1635-1644]
Mirbagheri, S. A. A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
Mirfatah, Seyed Mostafa Application of three Types of Dryers Namely Tunnel, Fluidized Bed, and Fluidized Bed with Microwave for Drying of Celery, Corn, and Sour Cherry: Experiments and Modeling (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 667-674]
Mirzabeigy, Alborz Semi-analytical Approach for Free Vibration Analysis of Variable Cross-Section Beams Resting on Elastic Foundation and under Axial Force [Volume 27, Issue 3, 2014, Pages 385-394]
Mirzaei Moghadam, Iman Influence of Nano-silica and Polypropylene Fibers on Bond Strength of Reinforcement and Structural Lightweight Concrete (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 261-268]
Mirzapour, Jamil Dynamic Response of Submerged Vertical Cylinder with Lumped Mass under Seismic Excitation [Volume 27, Issue 10, 2014, Pages 1547-1556]
Mishra, Rajesh Design and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE) [Volume 27, Issue 10, 2014, Pages 1581-1590]
Moayyedian, Farzad A Study on Combination of von Mises and Tresca Yield Loci In Non-Associated Viscoplasticity [Volume 27, Issue 3, 2014, Pages 441-448]
Moghimi, Hamid Reza Analytic Network Process Based Strategic Planning for Iran's Trade Promotion Organization [Volume 27, Issue 8, 2014, Pages 1215-1222]
Mohamed, A. R. Effect of Organic Substrate on Promoting Solventogenesis in Ethanologenic Acetogene Clostridium ljungdahlii ATCC5538 [Volume 27, Issue 2, 2014, Pages 185-194]
Mohamed Shaharoun, Awaludin Fixture Design Automation and Optimization Techniques: Review and Future Trends [Volume 27, Issue 11, 2014, Pages 1787-1794]
Mohammadi, Karim On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]
Mohammadi, Maedeh Effect of Organic Substrate on Promoting Solventogenesis in Ethanologenic Acetogene Clostridium ljungdahlii ATCC5538 [Volume 27, Issue 2, 2014, Pages 185-194]
Mohammadi, Mehrdad Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]
Mohammadian, Mostafa Young s Modulus of Single and Double Walled Carbon Nanocones Using Finite Element Method(TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1467-1474]
Mohammadi Ardehali, Reza Modeling of TiO2-water Nanofluid Effect on Heat Transfer and Pressure Drop [Volume 27, Issue 2, 2014, Pages 195-202]
MOHAMMADPOORY, ZEINAB Speech Enhancement using Laplacian Mixture Model under Signal Presence Uncertainty [Volume 27, Issue 9, 2014, Pages 1367-1376]
Mohammadzade, Hadi Hotel Location Problem Using Erlang Queuing Model under Uncertainty (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1879-1887]
Mojallali, H. An Optimized PID for Capsubots using Modified Chaotic Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1377-1384]
Mola-Abasia, H. Evaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE) [Volume 27, Issue 2, 2014, Pages 307-314]
Montaseri, Majid Assessment of Goodness of Fit Methods in Determining the Best Regional Probability Distribution of Rainfall Data [Volume 27, Issue 10, 2014, Pages 1537-1546]
Moosavian, Naser Hydraulic Analysis of Water Supply Networks using a Modified Hardy Cross Method [Volume 27, Issue 9, 2014, Pages 1331-1338]
Mostafavi, Seyed alireza An Analytical Model for Flame Propagation through Moist Lycopodium Particles with Non-unity Lewis Number [Volume 27, Issue 5, 2014, Pages 793-802]
Motameni, Homayoon Mapping CRC Card into Stochastic Petri Net for Analyzing and Evaluating Quality Parameter of Security (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 689-698]
Mousavi, S.M. Optimal Design of the Cross-docking in Distribution Networks: Heuristic Solution Approach [Volume 27, Issue 4, 2014, Pages 533-544]
Mousavi, S.M. A New Compromise Decision-making Model based on TOPSIS and VIKOR for Solving Multi-objective Large-scale Programming Problems with a Block Angular Structure under Uncertainty [Volume 27, Issue 11, 2014, Pages 1673-1680]

N

N, JEYANTHI RESCUE: Reputation based Service for Cloud User Environment [Volume 27, Issue 8, 2014, Pages 1179-1184]
N, Sathurappan Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]
Nahvi, Hassan Vibration Analysis of a Nonlinear System with a Nonlinear Absorber under the Primary and Super-harmonic Resonances (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 499-508]
Najafpour, G. D. A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
Najafpour, Ghasem A comparison on Lipase Production from Soybean meal and Sugarcane Bagasse in Solid State Fermentation using Rhizopus oryzae [Volume 27, Issue 2, 2014, Pages 171-176]
Nakhai Kamalabadi, Isa Joint Pricing and Inventory Control for Seasonal and Substitutable Goods Mentioning the Symmetrical and Asymmetrical Substitution [Volume 27, Issue 9, 2014, Pages 1385-1394]
Namjoo, Moslem Finite Element Analysis for Estimating the Effect of Various Working Conditions on the Temperature Gradients Created Inside a Rolling Tire [Volume 27, Issue 12, 2014, Pages 1920-1927]
Narimanzadeh, N. Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
Nateghi, F. Comparison of using Different Modeling Techniques on the Prediction of the Nonlinear Behavior of R/C Shear Walls [Volume 27, Issue 2, 2014, Pages 269-282]
Nateghi, F. The Effects of Internal and External Stiffeners on Hysteretic Behavior of Steel Beam to CFT Column Connections [Volume 27, Issue 7, 2014, Pages 1005-1014]
Nazoktabar, Mohsen Controlling the Power Output and Combustion Phasing in an HCCI Engine [Volume 27, Issue 11, 2014, Pages 1757-1766]
Nazoktabar, Mohsen Simulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1928-1935]
Nemati, Arash Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under Improved Exhaust Gas Recirculation [Volume 27, Issue 3, 2014, Pages 449-456]
Nemati, Mostafa Mapping CRC Card into Stochastic Petri Net for Analyzing and Evaluating Quality Parameter of Security (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 689-698]
Nemat Zadeh, Hossein Mapping CRC Card into Stochastic Petri Net for Analyzing and Evaluating Quality Parameter of Security (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 689-698]
Niaki, S.T.A. A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
Niaki, S.T.A. Redundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1663-1672]
Nickpour, Mojdeh Synthesis and Characteristics of Mesoporous Sol-gels for Lipase Immobilization [Volume 27, Issue 10, 2014, Pages 1495-1502]
Nikfarjam, Alireza Effect of TiO2 Nanofiber Density on Organic-Inorganic Based Hybrid Solar Cells (RESEARCH NOTE) [Volume 27, Issue 7, 2014, Pages 1133-1138]
Noori, Hamid Reza Length Scale Effect on Vibration Analysis of Functionally Graded Kirchhoff and Mindlin Micro-Plates [Volume 27, Issue 3, 2014, Pages 431-440]
Noori-daryan, Mahsa Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]

O

Oliaiy, Ali Introducing Padded Wall to Reduce Sloshing Induced Wall Pressure in Water Storage Tanks [Volume 27, Issue 12, 2014, Pages 1823-1831]
Osanloo, M. An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]

P

P, Neelamegam Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector [Volume 27, Issue 5, 2014, Pages 811-818]
Parhizkar, Hamid Simulation of Store Separation using Low-cost CFD with Dynamic Meshing [Volume 27, Issue 5, 2014, Pages 775-784]
Parsapour, Masoud Experimental and Numerical Studies on the Characteristics of Simple and Multi-cell Shapes of Quasi-hemisphere Thin-walled Structures [Volume 27, Issue 8, 2014, Pages 1307-1316]
Parvini, Mehdi Studying Performance of Dubinin-astakhov and Dubinin-raduchkevic Equations to Evaluate Nanopore Volume and Pore Size of MCM-41 Particles (TECHNICAL NOTE) [Volume 27, Issue 10, 2014, Pages 1511-1518]
Patnaik, Pragya Effect of Compression Ratio on Emission of CI Engine using Neat Karanja Oil and Karanja Oil Methyl Ester Blends [Volume 27, Issue 3, 2014, Pages 403-410]
Pazouki, Mohammad Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
Pedram, Omid An Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade [Volume 27, Issue 5, 2014, Pages 785-792]
Pennati, Giancarlo A Study on Ratio of Loss to Storage Modulus for the Blood Clot [Volume 27, Issue 8, 2014, Pages 1167-1172]
PIRHAYATI, MAHDI Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube [Volume 27, Issue 2, 2014, Pages 341-348]
Ponnusamy, Lakshmi An Investigation of Temperature Effects on Solar Photovoltaic Cells and Modules [Volume 27, Issue 11, 2014, Pages 1713-1722]
Poorebrahim, Gholam Reza Behavior of Compacted Lime-soil Columns [Volume 27, Issue 2, 2014, Pages 315-324]
Pourjafari, N. An Optimized PID for Capsubots using Modified Chaotic Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1377-1384]
Pourkarim Guilani, Pedram Redundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1663-1672]
Poursaeidi, Esmaeil An Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade [Volume 27, Issue 5, 2014, Pages 785-792]
Pouyan, Ali A Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
Pouyan, Ali A Detection of Alzheimer\\\\\\\'s Disease using Multitracer Positron Emission Tomography Imaging [Volume 27, Issue 1, 2014, Pages 51-56]
Pouyan, Ali A Estimating Reliability in Mobile ad-hoc Networks Based on Monte Carlo Simulation (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 739-746]
Prabhakar, Mahalingam High Gain DC-DC Converter using Active Clamp Circuit (RESEARCH NOTE) [Volume 27, Issue 1, 2014, Pages 123-130]

R

R, Thandeeswaran RESCUE: Reputation based Service for Cloud User Environment [Volume 27, Issue 8, 2014, Pages 1179-1184]
Rafiee, Mehran Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor [Volume 27, Issue 1, 2014, Pages 143-156]
Rahemi, Mohammad Amir Micro-modeling of Masonry Infilled RC Moment Resisting Frames to Investigate Arrangement of Compressive Diagonal Struts [Volume 27, Issue 6, 2014, Pages 865-880]
Rahmanpour, Mehdi An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
Raissi, Babak AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 763-768]
Rajappa, Muthaiah Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]
Ram, Mangey Modeling and Availability Analysis of Internet Data Center with various Maintenance Policies [Volume 27, Issue 4, 2014, Pages 599-608]
Ranjbar, Abolfazl Perfect Tracking of Supercavitating Non-minimum Phase Vehicles Using a New Robust and Adaptive Parameter-optimal Iterative Learning Control [Volume 27, Issue 7, 2014, Pages 1071-1080]
Ranjbar, Mohammad Reza Economic Aspect of Fuel Cell Power as Distributed Generation [Volume 27, Issue 1, 2014, Pages 57-62]
Ranjbar Noei, Abolfazl Numerical Solution of Optimal Control of Time-varying Singular Systems via Operational Matrices [Volume 27, Issue 4, 2014, Pages 523-532]
Rashidi, Ali morad An Experimental Study on the Thermal Conductivity of Carbon Nanotubes/Oil (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 411-416]
Rashvand, Kaveh Effect of Length-scale Parameter on Pull-in Voltage and Natural Frequency of a Micro-plate [Volume 27, Issue 3, 2014, Pages 375-384]
Rasouli, Nadia Joint Pricing and Inventory Control for Seasonal and Substitutable Goods Mentioning the Symmetrical and Asymmetrical Substitution [Volume 27, Issue 9, 2014, Pages 1385-1394]
Rasti, Batul Improving the Performance of Bayesian Estimation Methods in Estimations of Shift Point and Comparison with MLE Approach [Volume 27, Issue 6, 2014, Pages 921-932]
Rasulibaghban, Arezo Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]
Rath, Mahendra Exergy and Energy Analysis of Diesel Engine using Karanja Methyl Ester under Varying Compression Ratio [Volume 27, Issue 8, 2014, Pages 1259-1268]
Ravikumar, T. Reduction of Odometry Error in a two Wheeled Differential Drive Robot (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 359-366]
Rezaei, Hossein Assessment of Goodness of Fit Methods in Determining the Best Regional Probability Distribution of Rainfall Data [Volume 27, Issue 10, 2014, Pages 1537-1546]
Rezaei, Pejman A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
Rezaifar, Omid Comparison of using Different Modeling Techniques on the Prediction of the Nonlinear Behavior of R/C Shear Walls [Volume 27, Issue 2, 2014, Pages 269-282]
Rezazadeh, Ghader Stability Analysis in Parametrically Excited Electrostatic Torsional Micro-actuators [Volume 27, Issue 3, 2014, Pages 487-498]
Riahifar, Reza AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 763-768]
Rostami, Pejman Application of Multi-objective Optimization for Optimization of Half-toroidal Continuously Variable Transmission [Volume 27, Issue 9, 2014, Pages 1449-1456]

S

Saadat, Mozafar A New Intelligent Approach to Patient-cooperative Control of Rehabilitation Robots [Volume 27, Issue 3, 2014, Pages 467-474]
Saadat Foumani, Mahmoud Application of Multi-objective Optimization for Optimization of Half-toroidal Continuously Variable Transmission [Volume 27, Issue 9, 2014, Pages 1449-1456]
Sabet, Ali Reza Ballistic Performance of Hybrid Armor with Ceramic Inserts and Polymeric Matrix for Different Threat Levels (TECHNICAL NOTE) [Volume 27, Issue 6, 2014, Pages 945-950]
Sabetghadam, Fereidoun A Fast Immersed Boundary Fourier Pseudo-spectral Method for Simulation of the Incompressible Flows [Volume 27, Issue 9, 2014, Pages 1457-1466]
Sabouri, Mahdi Exact Modeling and Simulation of Saturated Induction Motors with Broken Rotor Bars Fault using Winding Function Approach [Volume 27, Issue 1, 2014, Pages 69-78]
Sabouri, Mahdi Magnetic Saturation Impacts on Fault Analysis of Squirrel-cage Six Phases Induction Motors using Winding Function Approach [Volume 27, Issue 9, 2014, Pages 1359-1366]
Sadafi, Nasibeh Structural and Functional Analysis of an Industrial, Flexible, and Demountable Wall Panel System (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 247-260]
Sadegheih, A. Deterministic and Metaheuristic Solutions for Closed-loop Supply Chains with Continuous Price Decrease [Volume 27, Issue 12, 2014, Pages 1897-1906]
SadeghpourHaji, M A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
Sadri Esfahani, Ali Modeling the Time Windows Vehicle Routing Problem in Cross-Docking Strategy Using Two Meta-Heuristic Algorithms [Volume 27, Issue 7, 2014, Pages 1113-1126]
Saebnoori, ehsan Surface Activation of NiTi Alloy by Using Electrochemical Process for Biomimetic Deposition of Hydroxyapatite Coating (TECHNICAL NOTE) [Volume 27, Issue 10, 2014, Pages 1627-1634]
Saeidi, Navid Studying Performance of Dubinin-astakhov and Dubinin-raduchkevic Equations to Evaluate Nanopore Volume and Pore Size of MCM-41 Particles (TECHNICAL NOTE) [Volume 27, Issue 10, 2014, Pages 1511-1518]
Saeidi, Navid A Procedure for Preparation of Semi-activated Carbon Fiber without any Treatment under High Temperature [Volume 27, Issue 10, 2014, Pages 1519-1526]
Safartoobi, Masoumeh Stabilization and Walking Control for a Simple Passive Walker Using Computed Torque Method (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1777-1786]
Sahraeian, Rashed Multi-objective Differential Evolution for the Flow shop Scheduling Problem with a Modified Learning Effect [Volume 27, Issue 9, 2014, Pages 1395-1404]
Sakhaii, Mandana A Robust Model for a Dynamic Cellular Manufacturing System with Production Planning [Volume 27, Issue 4, 2014, Pages 587-598]
Salahshoor, Masoomeh Investigation of the Effects of Pressure Path and Tool Parameters in Hydrodynamic Deep Drawing [Volume 27, Issue 7, 2014, Pages 1155-1166]
Salarieh, H. Tracking and Shape Control of a Micro-cantilever using Electrostatic Actuation [Volume 27, Issue 9, 2014, Pages 1439-1448]
Salimi, Atefeh A Hysteretic Two-phase Supply Modulator for Envelope Tracking RF Power Amplifiers [Volume 27, Issue 12, 2014, Pages 1832-1840]
Salimi, Meghdad A New Compromise Decision-making Model based on TOPSIS and VIKOR for Solving Multi-objective Large-scale Programming Problems with a Block Angular Structure under Uncertainty [Volume 27, Issue 11, 2014, Pages 1673-1680]
Salimi, Reza Mapping CRC Card into Stochastic Petri Net for Analyzing and Evaluating Quality Parameter of Security (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 689-698]
Sangpour, Parvaneh Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
Saravanan, R. Reduction of Odometry Error in a two Wheeled Differential Drive Robot (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 359-366]
Sarsabili, Mohammad Reza Studying Performance of Dubinin-astakhov and Dubinin-raduchkevic Equations to Evaluate Nanopore Volume and Pore Size of MCM-41 Particles (TECHNICAL NOTE) [Volume 27, Issue 10, 2014, Pages 1511-1518]
Sarvi, Mohammad A New Intelligent Controller for Parallel DC/DC Converters [Volume 27, Issue 1, 2014, Pages 131-142]
Sedighi, K. Experimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid [Volume 27, Issue 2, 2014, Pages 333-340]
Sedighi Zade, M. A New Intelligent Controller for Parallel DC/DC Converters [Volume 27, Issue 1, 2014, Pages 131-142]
Selahi, Ehsan Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings [Volume 27, Issue 3, 2014, Pages 475-486]
Setak, Mostafa A Node-based Mathematical Model towards the Location Routing Problem with Intermediate Replenishment Facilities under Capacity Constraint [Volume 27, Issue 6, 2014, Pages 911-920]
Setak, Mostafa An Inventory Model for Deteriorating Items Using Vendor-Managed Inventory Policy [Volume 27, Issue 7, 2014, Pages 1081-1090]
Setak, Mostafa Designing of Supply Chain Coordination Mechanism with Leadership Considering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1888-1896]
Seyed Razzaghi, Mehran The Effects of Internal and External Stiffeners on Hysteretic Behavior of Steel Beam to CFT Column Connections [Volume 27, Issue 7, 2014, Pages 1005-1014]
Seyyedvalilu, Mir Hatef Optimization of Double Pipe Fin-pin Heat Exchanger Using Entropy Generation Minimization [Volume 27, Issue 9, 2014, Pages 1431-1438]
Shafiee, Mohammad Reza A Novel Fuzzy Based Method for Heart Rate Variability Prediction [Volume 27, Issue 7, 2014, Pages 1041-1050]
Shahmardani, Mahdieh Dynamic Response of Submerged Vertical Cylinder with Lumped Mass under Seismic Excitation [Volume 27, Issue 10, 2014, Pages 1547-1556]
Shamgholi, Maryam Document Image Dewarping Based on Text Line Detection and Surface Modeling (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1855-1862]
Sharifi, Mani Redundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1663-1672]
Sharifi, MohammadAli Design of IIR Digital Filter using Modified Chaotic Orthogonal Imperialist Competitive Algorithm (RESEARCH NOTE) [Volume 27, Issue 7, 2014, Pages 1033-1040]
Sheikh Sajadieh, Mohsen An Iterative Decision Rule to minimize cost of Acceptance Sampling Plan in Machine Replacement Problem [Volume 27, Issue 7, 2014, Pages 1099-1106]
Sherafatnia, Khalil Analytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks using four Engineering Beam Theories [Volume 27, Issue 6, 2014, Pages 979-990]
Sherbaf Moghaddam, Anahita Multi-objective Economic-statistical Design of Cumulative Count of Conforming Control Chart [Volume 27, Issue 10, 2014, Pages 1591-1600]
Shirvani, Mansour Material Flow in Rotary Drums [Volume 27, Issue 6, 2014, Pages 829-838]
Shojaeezadeh, Ehsan Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
Shooshpasha, I. Evaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE) [Volume 27, Issue 2, 2014, Pages 307-314]
Siadatan, A.R. Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor [Volume 27, Issue 1, 2014, Pages 143-156]
SINGH, VIJAY Modeling and Availability Analysis of Internet Data Center with various Maintenance Policies [Volume 27, Issue 4, 2014, Pages 599-608]
Sobhanollahi, Mohammad Ali Analytic Network Process Based Strategic Planning for Iran's Trade Promotion Organization [Volume 27, Issue 8, 2014, Pages 1215-1222]
Sobhanollahi, Mohammad Ali Assessment of Improvement of Preventive Maintenance Systems Related to the Civil Projects Using Concepts of Value Engineering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1872-1878]
Soetrisnanto, Danny Phytoremediation of Palm Oil Mill Effluent by using Pistia Stratiotes Plant and Algae Spirulina sp for Biomass Production (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1809-1814]
Soltani, Elshan A Fast Immersed Boundary Fourier Pseudo-spectral Method for Simulation of the Incompressible Flows [Volume 27, Issue 9, 2014, Pages 1457-1466]
Soltani, M. R. Surface Pressure Contour Prediction Using a GRNN Algorithm [Volume 27, Issue 6, 2014, Pages 819-828]
Soltani, Roya A New Nonlinear Multi-objective Redundancy Allocation Model with the Choice of Redundancy Strategy Solved by the Compromise Programming Approach [Volume 27, Issue 4, 2014, Pages 545-552]
Sudin, Izman Fixture Design Automation and Optimization Techniques: Review and Future Trends [Volume 27, Issue 11, 2014, Pages 1787-1794]
Sumardiono, Siswo Effect of Total Solid Content to Biogas Production Rate from Vinasse (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 177-184]

T

Tabkhi, F. Operation Analysis of Rotary Tools of Compressor Station Using Exergy Approach [Volume 27, Issue 12, 2014, Pages 1815-1822]
Taghilou, Mohammad Optimization of Double Pipe Fin-pin Heat Exchanger Using Entropy Generation Minimization [Volume 27, Issue 9, 2014, Pages 1431-1438]
Taghizadeh, Seyed Reza LEBRP - A Lightweight and Energy Balancing Routing Protocol for Energy-Constrained Wireless Ad Hoc Networks [Volume 27, Issue 1, 2014, Pages 33-38]
Tahani, Masoud Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings [Volume 27, Issue 3, 2014, Pages 475-486]
Taheri, Asghar Magnetic Saturation Impacts on Fault Analysis of Squirrel-cage Six Phases Induction Motors using Winding Function Approach [Volume 27, Issue 9, 2014, Pages 1359-1366]
Taherinejad, Morteza Steady Flow Analysis and Modeling of the Gas Distribution Network Using the Electrical Analogy (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1269-1276]
Tajik Jamal-Abad, Milad An Experimental Study on the Thermal Conductivity of Carbon Nanotubes/Oil (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 411-416]
Tarafdar Hagh, Mehrdad Radial Basis Neural Network Based Islanding Detection in Distributed Generation [Volume 27, Issue 7, 2014, Pages 1061-1070]
Tasnimi, A. A. Micro-modeling of Masonry Infilled RC Moment Resisting Frames to Investigate Arrangement of Compressive Diagonal Struts [Volume 27, Issue 6, 2014, Pages 865-880]
Tavakkoli-Moghaddam, Reza Optimal Design of the Cross-docking in Distribution Networks: Heuristic Solution Approach [Volume 27, Issue 4, 2014, Pages 533-544]
Tavakkoli-Moghaddam, Reza A Robust Model for a Dynamic Cellular Manufacturing System with Production Planning [Volume 27, Issue 4, 2014, Pages 587-598]
Tavakkoli-Moghaddam, Reza Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]
Tavakkoli-Moghaddam, Reza Designing a Meta-Heuristic Algorithm Based on a Simple Seeking Logic [Volume 27, Issue 10, 2014, Pages 1601-1610]
Taybi, Mehdi Accurate Model of Capacitance for MEMS Sensors using Corrugated Diaphragm with Residual Stress [Volume 27, Issue 1, 2014, Pages 63-68]
Tayebifard, Seyed Ali Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
Thoma, Yann On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]
Tofigh, Ali Asghar A New Nonlinear Multi-objective Redundancy Allocation Model with the Choice of Redundancy Strategy Solved by the Compromise Programming Approach [Volume 27, Issue 4, 2014, Pages 545-552]
Tohidi, S.H Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
Toloei, A.R. Simulation of Store Separation using Low-cost CFD with Dynamic Meshing [Volume 27, Issue 5, 2014, Pages 775-784]
TRIPATHI, RAKESH EOQ Model with Cash Flow Oriented and Quantity Dependent Under Trade Credits (TECHNICAL NOTE) [Volume 27, Issue 7, 2014, Pages 1107-1112]

U

UNIYAL, AMIT EOQ Model with Cash Flow Oriented and Quantity Dependent Under Trade Credits (TECHNICAL NOTE) [Volume 27, Issue 7, 2014, Pages 1107-1112]
Upegi, Andres On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]

V

Vaezi, M.R. Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
Vaezi, M.R. Synthesis of Zinc Oxide Nanostructured Thin Film by Sol- Gel Method and Evaluation of Gas Sensing Properties [Volume 27, Issue 5, 2014, Pages 757-762]
Vahdani, B. Optimal Design of the Cross-docking in Distribution Networks: Heuristic Solution Approach [Volume 27, Issue 4, 2014, Pages 533-544]
Vahdat-Zad, Mohammad Ali Deterministic and Metaheuristic Solutions for Closed-loop Supply Chains with Continuous Price Decrease [Volume 27, Issue 12, 2014, Pages 1897-1906]
Vali, Ahmad Reza Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism [Volume 27, Issue 1, 2014, Pages 157-170]
Vaseghi, Zahra A comparison on Lipase Production from Soybean meal and Sugarcane Bagasse in Solid State Fermentation using Rhizopus oryzae [Volume 27, Issue 2, 2014, Pages 171-176]
Vatani, Behdad A Robust Model for a Dynamic Cellular Manufacturing System with Production Planning [Volume 27, Issue 4, 2014, Pages 587-598]
Vossoughi, M. Influence of Glycerol and Clay Contents on Biodegradability of Corn Starch Nanocomposites [Volume 27, Issue 2, 2014, Pages 203-214]

W

Wagih, Ahmed Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]
Wang, Li Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
Wang, Youming Experimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography [Volume 27, Issue 11, 2014, Pages 1723-1730]
Wei, Kai Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]
Wu, Jin-xing Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
Wu, Qing Experimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography [Volume 27, Issue 11, 2014, Pages 1723-1730]

X

Xu, Ke Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
Xu, Yuqiang Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]

Y

Yadollahzadeh Tabari, Meisam Estimating Reliability in Mobile ad-hoc Networks Based on Monte Carlo Simulation (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 739-746]
Yahia Mehrjerdi, Yahia A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
Yahyaei, Mohsen Multi-criteria Logistic Hub Location by Network Segmentation under Criteria Weights Uncertainty (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1205-1214]
Yahyazadeh, Meisam Perfect Tracking of Supercavitating Non-minimum Phase Vehicles Using a New Robust and Adaptive Parameter-optimal Iterative Learning Control [Volume 27, Issue 7, 2014, Pages 1071-1080]
Yapang Gharavi, Sakhi Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 293-306]
Yousefi, Mohammad Reza Material Flow in Rotary Drums [Volume 27, Issue 6, 2014, Pages 829-838]
Yousefi, Sohrabali Numerical Solution of Optimal Control of Time-varying Singular Systems via Operational Matrices [Volume 27, Issue 4, 2014, Pages 523-532]
Yousefsani, Seyed Abdolmajid Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings [Volume 27, Issue 3, 2014, Pages 475-486]
Yuan, Jianyi Physical Model Test and Numerical Simulation Study of Deformation Mechanism of Wall Rock on Open Pit to Underground Mining (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1795-1802]

Z

Zahraee, Seyed mohammad Ballistic Performance of Hybrid Armor with Ceramic Inserts and Polymeric Matrix for Different Threat Levels (TECHNICAL NOTE) [Volume 27, Issue 6, 2014, Pages 945-950]
Zain, M.F.M. Structural and Functional Analysis of an Industrial, Flexible, and Demountable Wall Panel System (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 247-260]
Zamani, Cyrus AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 763-768]
Zamani, Farzane Development of Clay Foam Ceramic as a Support for Fungi Immobilization to Biodiesel Production (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1691-1696]
Zamanzadeh, Mohammad-reza Static Pull-in Analysis of Capacitive FGM Nanocantilevers Subjected to Thermal Moment using Eringen’s Nonlocal Elasticity [Volume 27, Issue 4, 2014, Pages 633-642]
Zameni, M. Synthesis of Zinc Oxide Nanostructured Thin Film by Sol- Gel Method and Evaluation of Gas Sensing Properties [Volume 27, Issue 5, 2014, Pages 757-762]
Zaretalab, Arash Redundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1663-1672]
Zhang, Can-can Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
Zhang, Dingbang Physical Model Test and Numerical Simulation Study of Deformation Mechanism of Wall Rock on Open Pit to Underground Mining (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1795-1802]
Zhang, Hongning Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]
Zhang, Huizeng Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]
Zhou, Chuanbo Physical Model Test and Numerical Simulation Study of Deformation Mechanism of Wall Rock on Open Pit to Underground Mining (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1795-1802]