Author Index

A

  • A, Eswar Kumar WAVINESS EFFECT OF FIBER ON BUCKLING BEHAVIOR OF SISAL/CARBON NANOTUBE REINFORCED COMPOSITES USING EXPERIMENTAL AND FINITE ELEMENT METHOD [Volume 34, Issue 12, 2021]
  • Aazami, A. A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
  • Abbas, H. O. Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
  • Abbas, S. A. Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
  • Abbasian, T. A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
  • Abbass, M. M. Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
  • Abbaszadeh, K. Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
  • Abbaszadeh, M.A. Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
  • Abd Al-Hamza, M. Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
  • Abd Ali, H. S. Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
  • Abd- Awn, S. H. Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
  • Abdolrahimi, H. A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
  • Abdoos, A. A. A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
  • AbdulRahman, Sh. Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
  • Abdulridha, A. A. Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
  • Abedi, M. Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
  • Abedi, M. Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
  • Abedini-Ahangarkola, H. Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
  • Abrahim, Mustafa Jamal Effect of Matric Suction on Deformation of Gypseous Sand Using Modified Oedometer [Volume 34, Issue 12, 2021]
  • Abtahi, Z. Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
  • Achyutha kumar reddy, M. Optimization of Calcined Bentonite Caly Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
  • Adami, P. Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
  • Adibi, T. Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
  • Adlparvar, M.R. Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
  • Adri, A. Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
  • Afjei, E. Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
  • Afkar, A. Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
  • Afkar, A. A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
  • Afrang, S. A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
  • Aghababa, H. Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
  • Aghaei, A. Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
  • Aghazadeh, H. Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
  • Ahadi Akhlaghi, I. Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
  • Ahmadi, H. Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
  • Ahmadi, M. Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
  • Ahmad Moazam, M. Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
  • Akbari, G. H. Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
  • Akhlaghi Modiri, F. Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
  • Akhondi, E. Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
  • Akhtarpour, A. Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
  • Alamdar, H. Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
  • Alan, M P.N Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
  • Al-Ani, M. S. Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
  • Al-dujaili, M. A. Ahmed Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
  • Alemi-Rostami, M. Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
  • Alfatlawi, T. J.M. Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
  • Al-Haidari, H. S. Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
  • Alhassani, A. M.J. Analysis of Under-Reamed Piles Subjected to Different Types of Load in Clayey Soil [Volume 34, Issue 8, 2021, Pages 1940-1948]
  • Al-Haydari, I. S. Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
  • Al-Hydary, I. A. Disher Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
  • Ali, I. F. Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
  • Ali, I. F. Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
  • Aliakbarian, H. Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
  • Alihosseini, A. Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
  • Alisjahbana, S. W. Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
  • Alizadeh, B. Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
  • Alizadeh Kharkeshi, B. Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
  • Al-Jaberi, Z. Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
  • Aljazaeri, Z. R. Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
  • Al-Neami, M. A. Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
  • Alsharifi, Z. Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
  • Al-Sultani, S. A. J. Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
  • Alvanchi, A. Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
  • Alwash, N. A. Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
  • AlyanNezhadi, M. M. A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
  • Aminmahalati, A. Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
  • Amirahmadi, M. Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
  • Amirshenava, S. Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
  • Amirzadeh, Z. Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
  • Amouei, M. A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
  • Anand, N. Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
  • Andoko, A. Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
  • Arab Khaburi, D. A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
  • Arbabtafti, M. Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
  • Arbabtafti, M. Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
  • Ardana, M.D.W The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
  • Ardeshir, G. Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
  • Argimbaev, K. R. Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
  • Argimbaev, K. R. Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
  • Argimbaev, K. R. Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
  • Arish, N. Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
  • Arish, N. Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
  • Arkat, J. Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
  • Arkat, J. Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
  • Arkat, Jamal Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
  • Arulraj, P. G. Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
  • Arunraj, E. A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
  • Asadollahzadeh, M. Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
  • Asadpour, M. A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
  • A. Samani, A. Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
  • Asgari, M.S. Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
  • Asgari, S. A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
  • Askari, T. Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
  • Aslami, M. H. Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
  • Assadat Yaghubi, N. Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
  • Assadi, A. Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
  • Aswad, M. A. Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
  • Awang, M. Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
  • Azami, G. Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
  • Azdast, T. Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
  • Azimi, E. Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
  • Azimi, Y. Determining the Optimal Maintenance Strategy for Ammonium Hydroxide ‎Production Unit Using Risk-Based Inspection ‎and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
  • Azizian, D. Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
  • Az-Zahra, N. Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]

B

  • Babaeimorad, S. A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
  • Babagoli, M. A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
  • Babaheydari, R M Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
  • Babenko, V. Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
  • Babenko, V. Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
  • Babyr, N. V. System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
  • Badaghei, R. Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
  • Bagheri, F. Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
  • Bagheri Sharebabaki, F. Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
  • Bahjat, S. Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
  • Bahrami, leyla Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021]
  • Bahrami, M. Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
  • Bahrebar, M. Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
  • Bakhshan, Y. Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
  • Bakhshandeh Amnieh, H. A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
  • Balamurali, K. Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
  • Baleghi, Y. Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
  • Band Band, H. Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
  • Banejad, M. A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
  • Barazandeh, A. Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
  • Barkhordari, M.S. Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
  • Barrios, A. M. Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
  • Barzegar, B. A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
  • Behrad Vakylabad, A. Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
  • Beirami, B. A. Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
  • Benamer, R Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
  • Besmi, M.R. Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
  • Bharti, D. Graph Theoretic Loss Allocation Method for Microgrids having Variable Generation [Volume 34, Issue 9, 2021, Pages 2060-2069]
  • Bhat, J. A. Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
  • Bhatt, D. V. Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
  • Bigdeli, M. The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
  • Bigdeli, M. Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
  • Blaabjerg, F. A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
  • Boiko, J. M. Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
  • Bora, C. Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
  • Boukharouba, T. Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
  • Boyer, O. A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
  • Bozorgi-Amiri, A. A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
  • Broumandnia, A. Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
  • Burgos, L. M. Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
  • B. Wani, S. Influence of Bi-directional Fibreglass Grid Reinforcement on Drying Shrinkage and Mechanical Properties of Lightweight Foamed Concrete [Volume 34, Issue 1, 2021, Pages 10-18]

C

  • Cano-Europa, E. Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
  • Chan, H.Y. Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
  • Chandra, S. Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
  • Chelongar, A. Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
  • Chin, C. Seong Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
  • Chinforoush, N. A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
  • Chokan, F. The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
  • Choudhury, S. Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
  • Choudhury, S. Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
  • Chrismianto, Deddy Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
  • Contreras, A. Objective Functions for the Optimization of an Ultra Wideband Antenna [Volume 34, Issue 7, 2021, Pages 1743-1749]

D

  • Dadashi Haji, M. The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
  • Dadgar, A. Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
  • Damiri Ganji, D. D. The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
  • Darabi, A. An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
  • Darabi, A. Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
  • Darezereshki, E. Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
  • Darvishvand, H.R. Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
  • Davani Motlagh, A. Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
  • Davari, S. Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
  • Davarnejad, R. Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
  • Dehghan, M. Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
  • Delaram, F. Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
  • Demyanenkob, O. Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
  • Deo, S. V Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
  • Derbentsev, V. Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
  • Desale, G. R. Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
  • Dhouib, Souhail Optimization of Travelling Salesman Problem on Single Valued Triangular Neutrosophic Number using Dhouib-Matrix-TSP1 Heuristic [Volume 34, Issue 12, 2021]
  • Didehvar, N. Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
  • Dixit, A. A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
  • Dong, P. V. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Dong, P. V. Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Doost Mohammadi, M.H. New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
  • Doroudi, A. A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
  • Drebenstedt, C. Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
  • Duc, N. V. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Dung, H. T. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Durali, M. A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]

E

  • E. Babadi, M. Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
  • Ebadi, A. A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
  • Ebrahimi, E. Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
  • Ebrahimi, M. Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
  • Ebrahimi Saryazdi, S.M. Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
  • Ebrahimnejad, S. Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
  • E.Ergin, M Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
  • Efimova, E. A. Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
  • Ehsanian, M. Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
  • Elahi, E. New Model of Burden Thickness Estimation for Blasting of Open Pit Mines [Volume 34, Issue 5, 2021, Pages 1381-1389]
  • Elavenil, S. Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
  • El Khouddar, Y. Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
  • El-Wazery, M. S. Mode I fracture toughness of Carbon/glass hybrid comopsite [Volume 34, Issue 11, 2021, Pages 2418-2423]
  • Emadi, S. Services Composition in Multi-cloud Environments using the Skyline Service Algorithm [Volume 34, Issue 1, 2021, Pages 56-65]
  • Emami, N. Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
  • Emamian, S. Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
  • Enshayi, M. Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
  • Ernawati, L. Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
  • Esfahanipour, Akbar Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
  • Esfandian, H. Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
  • Esfandian, N. A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
  • Es-haghi, M.S. Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
  • Esmaeili, Q. Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
  • Esmaeili, S. Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
  • Espitia, L. A. Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
  • Ethiraj, N. Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
  • Ezoji, M. Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
  • Ezoji, M. Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
  • Ezoji, R. Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]

F

  • Faez, A. Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
  • Faiz, J. Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
  • Fakhrzad, M.B. A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
  • Faraji, A. Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
  • Faraji, A. Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
  • Farsi, M. A. A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
  • Farughi, H. Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
  • Farughi, H. Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
  • Farughi, Hiwa Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
  • Farzinfar, M. Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
  • Fasihi, M. Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
  • Fatahi, F. Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
  • Fateh, H. A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
  • Fattah, M. Y. Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
  • Fatthi, P. A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
  • Fazlali, A. Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
  • Fazlollahtabar, H. A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
  • Feoktystova, O. Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
  • Firouzeh, Z. H. Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
  • Firouzkouhi, H. Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
  • Fomina, E. Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]

G

  • Gabov, V. V. Evaluating the Efficiency of Coal Loading ‎Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an ‎Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
  • Gao, J. Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
  • Gapsari, F. Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
  • Gerami, M. Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
  • Gerami, M. Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
  • Gerasimov, V. I. Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
  • Ghaedrahmat, Z. Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
  • Ghalandarzadeh, M. A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
  • Ghamari, H. The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
  • Ghanbari Sorkhi, A. Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
  • Ghapanvary, M. A. Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
  • Gharehpetian, G. B. Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
  • Ghasemi, M. A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
  • Ghasemi, R. Determining the Optimal Maintenance Strategy for Ammonium Hydroxide ‎Production Unit Using Risk-Based Inspection ‎and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
  • Ghasemi, Z. Determining the Optimal Maintenance Strategy for Ammonium Hydroxide ‎Production Unit Using Risk-Based Inspection ‎and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
  • Ghasemzadeh, M. The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
  • Ghasemzadeh, M. The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
  • Ghazi-Maghrebi, S. A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
  • Ghods, M. Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
  • Gholami, A. Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
  • Gholami, M. Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
  • Gholami, M. Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
  • Gholami, P. Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
  • Gholami, P. A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
  • Gholamipour, R. Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
  • Gholizadeh, S, Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
  • Gholizade Narm, H. Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
  • Ghorbankhan, A. Ghorbankhan Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
  • Ghoreishian, F. An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
  • Gokul, G. Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
  • Goodarzian Urimi, M. Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
  • Govindaraju, M. Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
  • Graciano-Uribe, J. Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
  • G. Taleghani, H. Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
  • Gunasekaran, K. Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
  • Gunasekaran, N. Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
  • Gunawan, H. A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
  • Guo, L. Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
  • Gupta, A.V. S. S. K. S. Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
  • Gupta, N. A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
  • Gupta, P. K. Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
  • Gupta, P. Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
  • Gupta, P. Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
  • Gupta, S. Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
  • Gupta, V. Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
  • Guzev, M. A. Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]

H

  • Habibi, M. Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
  • Habibi, M. Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
  • Hadiyoso, S. Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
  • Haghzad Klidbary, S. Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
  • Hajiaghaei-Keshteli, M. Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
  • Haji Sheik Mohammed, M. S. Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
  • Hajsadeghi, M. Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
  • Haj Seiyed Taghia, S.A Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
  • Hallajisani, A. Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
  • Hamidi, H. Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
  • Hamidi, H. Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
  • Hamidi, HOJAT Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021]
  • Hammachukiattikul, P. Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
  • Handikherkar, V. C. Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
  • Harounabadi, A. Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
  • Hasani, A. Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
  • Hasanzadeh, R. Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
  • Hasanzadeh, R. P. R. Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
  • Hashemi, S.M.R. Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
  • HashemiRafsanjani, S.H. A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
  • Hashempour, M. Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
  • Hassani Joshaghani, A. Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
  • Hassanpour, H. Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
  • Hassanpour, H. Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
  • Hassanpour, H. Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
  • Hassanpour, H. A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
  • Hassanpour, H. Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
  • Hassanpour, H. A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
  • Hassanpour, Hamid A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021]
  • Hassanpour, P. Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
  • Hassanzadeh Nemati, N. Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
  • Heeralal, M. Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
  • Heidari, A. Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
  • Heidari, M. Services Composition in Multi-cloud Environments using the Skyline Service Algorithm [Volume 34, Issue 1, 2021, Pages 56-65]
  • Heidarzad Moghaddam, H. Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
  • Hekmati, A. Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
  • Hemalatha, G. Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
  • Hemalatha, G. A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
  • Heydari. T, A.M. Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
  • Hidayatia, N. A. Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
  • Hoseini, M. H. Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
  • Hosseini, M. Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
  • Hosseini, M.R. Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
  • Hosseini, S.A The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
  • Hosseini, S. M. A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
  • Hosseinipour, S.J. Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
  • Hosseinipour, S.J. Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
  • Hosseinnejad, H. Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
  • HosseinNia, S. H. Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
  • Hosseinpour, K. A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
  • Hosseinzadeh, N. A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
  • Hosseinzadeh, Y. Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
  • Hosseinzadeh Lotfi, F. Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
  • Humphries, U. Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
  • Hung, T. Q. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Hussein, A. A. Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
  • Hussein, M. N. Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]

I

  • Ihsan, E. A. Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
  • Ilin, I. V. System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
  • Ilman, M. N. Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
  • Imani, Z. Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
  • Imani, Z. Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
  • Imran, A. Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
  • Iqbal, Z. Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
  • Iqhrammullah, M. Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
  • Iranpour Mobarakeh, M. Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
  • Irawati, I. D. Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
  • Ismael, M. A. Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]

J

  • Jaafarzadeh, N. Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
  • Jabbar Hassan, A. Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
  • Jabbari, E. Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
  • Jafari, V. A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
  • Jafari-Nodoushan, Abbasali A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
  • Jafarmadar, S. Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
  • Jahanian, O. Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
  • Jahanshahi, M. Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
  • Jalali, A. Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
  • Jalali, A. Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
  • Jalali, M. Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
  • Jalali, M. Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
  • Jalilehvand, M. Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
  • Jamali, N. Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
  • Jamasri, J. Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
  • Jamshidi Aval, H. Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
  • Jamuna Rani, G Experimental study of YSZ and TiO2 Thermal Barrier Coated Piston effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021]
  • Jatti, V. S. Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Javadian, M. Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
  • Javid, A.H. Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
  • Javidi, M. M. Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
  • Jazayeri, S.A. Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
  • Jithendra, C. Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
  • Johari, M. S. Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
  • Jokardarabi, Mohammad A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
  • Jongvivatsakul, P. Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]

K

  • K, Sivaji Babu WAVINESS EFFECT OF FIBER ON BUCKLING BEHAVIOR OF SISAL/CARBON NANOTUBE REINFORCED COMPOSITES USING EXPERIMENTAL AND FINITE ELEMENT METHOD [Volume 34, Issue 12, 2021]
  • Kadhim, M. J. Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
  • Kadhum, M. M. Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
  • Kadivar, M. H. Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
  • Kadkhodayan, M. Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
  • Kaewkuekool, S. The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
  • Kaewmesri, P. Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
  • Kafi Hernashki, R. Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
  • Kahrobaee, S. Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
  • Kakha, G. H. An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
  • Kapoor, R. Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
  • Karami Mohammadi, R. The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
  • Karimi, J. Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
  • Karimpour, S.R. Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
  • Kavimandan, P. Sh. Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
  • Kavoosi Davoodi, S. M. Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
  • Kazemi, M.G. A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
  • Kazemi, M.H. A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
  • Kazemi, S. Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
  • Keawsawasvong, S. Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
  • Keshavarz, M. A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
  • Khadirnaikar, R. B. Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
  • Khakpour, Z. Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
  • Khan, H. Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
  • Khanabdal, S. A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
  • Khanjani, J. Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
  • Khatami, H. Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
  • Khayati, G. R. Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
  • Khayati, G.R. Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
  • Khayati, G.R. Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
  • Khayati, G.R. Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
  • Khazaei Feizabad, M.H. Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
  • Khorasani, S.M.J Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
  • Khorasani, S.M.J. Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
  • Khorsandijou, S.M. Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
  • Khosravian, E. Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
  • Khosrogorji, S. Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
  • Khrustalev, K. Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
  • Khrustalova, S. Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
  • Khudhaire, H. Y. Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
  • Kiran, K. K. Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
  • Kohestani, H. Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]
  • Kohli, Narendra Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021]
  • Kouchakzadeh, Mohammad Ali A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
  • Kouhestanian, H. Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
  • Kovalchuk, V. S. Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
  • Kozhevnikov, E. V. Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
  • Krishnakumar, S. Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
  • Kuchaki Rafsanjani, M. Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
  • Kusmono, K. Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
  • Kusmono, K. Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
  • Kusumaatmaja, A. Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]

L

  • Labibi, H. Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
  • Lapthorn, A. Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
  • Larijani, M. M. Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
  • Lashgari, V. A. New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
  • Latif Shabgahi, Gh. A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
  • Li, C. The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
  • Ligotsky, D. N. Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
  • Linh, N. K. Evaluating the Efficiency of Coal Loading ‎Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an ‎Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
  • Lotfi, M. M. Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
  • Lotfi, S. The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
  • Lotfollahi -Yaghin, M. Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
  • Lotfollahi-Yaghin, M. A. Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
  • Lotfollahi-Yaghin, M.A. Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
  • Lubis, S. Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
  • Ly, N. T. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Ly, N. T. Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Lyba, V. Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
  • Lykov, Y. V. Evaluating the Efficiency of Coal Loading ‎Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an ‎Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]

M

  • Ma, J. Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
  • Madhkhan, M. Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
  • Maghsoudipour, A. Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
  • Mahajan, V. Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
  • Mahdavi, A. Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
  • Mahdi, A. A. Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]
  • Mahdian Dehkordi, N. A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
  • Mahini, S.S The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
  • Mahmood, M. S. Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
  • Mahmood, Mohammed Shakir Effect of Matric Suction on Deformation of Gypseous Sand Using Modified Oedometer [Volume 34, Issue 12, 2021]
  • Mahmoodi, A. Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
  • Mahmoodian, A. A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
  • Mahmoudi, M. A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
  • Maleki, A. Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
  • Maleki, A. Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
  • Maleki, A. Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
  • Manei, S. Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
  • Mansouri, A. Effect of Segregation on Opinion Formation in Scale-Free Social Networks: An Agent-based Approach [Volume 34, Issue 1, 2021, Pages 66-74]
  • Mansouri, F Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
  • Mansouri, N. Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
  • Maram, G. Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
  • Marandi, S.M. Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
  • Marchenko, R. S. System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
  • Marchione, F. Analytical Stress Analysis in Single-lap Adhesive Joints under Buckling [Volume 34, Issue 2, 2021, Pages 313-318]
  • Marchione, F. Enhancement of Stiffness in GFRP Beams by Glass Reinforcement [Volume 34, Issue 3, 2021, Pages 615-620]
  • Marchione, F. FE analysis of single-lap adhesive joints with tapered adherends [Volume 34, Issue 10, 2021, Pages 2213-2218]
  • Marignetti, F. Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
  • Martynyuk, V. V. Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
  • Mashayekhi, Hoda A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021]
  • Mazaheri, H. Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
  • Medhlom, M. K. Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
  • Mehrabiyan, M. Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
  • Memariani, A. A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
  • Menghani, J. Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
  • Menghani, J. V. Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
  • Menhaj, M.B. A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
  • Mergu, K. Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
  • Meyghani, B. Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
  • Mibang, D. Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
  • Minh, N. D. Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Mir, B.A. Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
  • Mirabedi, S. M. M. A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
  • Mirabootalebi, S.O Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
  • Mirhoseini, S.Mohammad Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
  • Mirhosseini, N. Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
  • Mirhosseini, S.M. Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
  • Mirhosseini Moghadam, M. Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
  • Mirimani, S.M. Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
  • Miroshnichenko, N. Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
  • Miroud, D. Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
  • Mirzaie, I. Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
  • Mirzarezaee, M. The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
  • Mobadersani, F. Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
  • Mohagheghpour, E. Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
  • Mohamad, D. Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
  • Mohammadi, M. A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
  • Mohammadi, S. A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
  • Mohammadi, Y. Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
  • Mohammadi Ajamloo, A. Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
  • Mohammadipour, P. Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
  • Mohammadiyan, H. Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
  • Mohammad-Karimi, N. The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
  • Mohammadzadeh, A. A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
  • Mohammadzadeh, M. Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
  • Mohammed-Noor Khudhur, H. Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
  • Mohebi, M. Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
  • Mohsenzadeh, M. The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
  • Mohsenzadeh, S. Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
  • Mohsin, M. S. Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
  • Mojaver, M. Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
  • Mokhtarzade, M. Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
  • Molaei, M.J. Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
  • Momin, A. I. A Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
  • Monfared, V. The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
  • More, S. R. Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
  • More, S. R. Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
  • Mosalman Yazdi, H. Presenting a New Method for Earthquake Relief Center Location Allocation based on Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 769-781]
  • Mosalman Yazdi, H. Location Allocation of Earthquake Relief Centers in Yazd City Based on Whale Optimization Algorithm [Volume 34, Issue 5, 2021, Pages 1184-1194]
  • Moshrefi, A. Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
  • Moslehi Niasar, M. Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
  • Mos’hafi, M. Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
  • Mostafavi, M. Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
  • Motahar, S. A neural network approach to estimate non-Newtonian behavior of nanofluid phase change material containing mesoporous silica particles [Volume 34, Issue 8, 2021, Pages 1974-1981]
  • Motameni, H. A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
  • Motie Birjandi, A. A. An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
  • Mousavi, M. H. Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
  • Mousavi Bafrouyi, S.M.S Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
  • Mu, Y. Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
  • Muniraj, D. Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
  • Murmu, M. Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
  • Murugaiyan, V. Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
  • Muthuramalingam, T. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]

N

  • Nabi, H. The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
  • Nabian, N. Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
  • Nadjafi, M. Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
  • Nahvi, A. Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
  • Nair, S. S. Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
  • Najafi, S. E. Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
  • Najafi, S.E. Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
  • Najafpour, G. D. Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
  • Naji, H. I. Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
  • Nakhaei, M. R. Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
  • Nakhai Kamalabadi, I. Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
  • Namar, M.M. Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
  • Naseri, S.A. Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
  • Nasiri-Zarandi, R. Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
  • Navabakhsh, M. Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
  • Nazemizadeh, M. Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
  • Nejati, Z. Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
  • Nejati, Z. Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
  • Nematifard, V. Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
  • Nguyen, Duc-Trong Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021]
  • Niazi, S. Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
  • Niebles-Nuñez, E. E. Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
  • Nikolaev, N. I. Study of Bonding Strength at Salt-cement Interface During Cementation of Salt Layers [Volume 34, Issue 2, 2021, Pages 581-586]
  • Nikzadfar, K. Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
  • Noorzad, A. Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
  • Noroozinejad Farsangi, E. Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
  • Noroozinejad Farsangi, E. Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
  • Noroozinejad Farsangi, E. A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
  • Noroozinejad Farsangi, E. Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
  • Norouzi Sahraei, H. Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
  • Norozpour Niazi, A. An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
  • Nosratollahi, M. Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
  • Nuraini, L. A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]

O

  • Obruch, H. Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
  • Ojaghi, M. Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
  • Omidi, R. Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
  • Ommi, F. Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
  • Osanloo, M. Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
  • Outassafte, O. Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]

P

  • P, Phani Prasanthi WAVINESS EFFECT OF FIBER ON BUCKLING BEHAVIOR OF SISAL/CARBON NANOTUBE REINFORCED COMPOSITES USING EXPERIMENTAL AND FINITE ELEMENT METHOD [Volume 34, Issue 12, 2021]
  • Pahlavan, H. Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
  • Pandey, R. Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
  • Pant, D. Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
  • Pardoyo, P. Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
  • Parivar, H. An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
  • Parivar, H. Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
  • Paul, C. P. Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
  • Pavlovskaia, E. E. Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
  • Peasura, P. The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
  • Peiravi, M. M. The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
  • Phalle, V. M. Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
  • Phan, N. H. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Phan, N. H. Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Phan, Vu To Anh Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021]
  • Pirayesh, M. Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
  • Poormohammadi, A. Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
  • Pooyan, M. An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
  • Poplygin, V. V. Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
  • Poplygin, V. V. Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
  • Pordel Maragheh, B. Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
  • Pourabdoli, M. New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
  • Pourasad, Y. A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
  • Pourfallah, M. The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
  • Pourmoosa, A. A. Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
  • Prifiharni, S. A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
  • Priyotomo, G. A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
  • Promakhov, V. Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
  • Purwanto, A. Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
  • Puspita, K. Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
  • Putra, I.D.G.A.D The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
  • Putra, O. A. Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]

Q

  • Qolipour, F. The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]

R

  • Rabiee, A. H. Numerical Study on Vibration Attenuation of Cylinder using Active Rotary Oscillating Controller [Volume 34, Issue 1, 2021, Pages 202-211]
  • Rabiee, S. M. Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
  • Rafiei, A. Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
  • Rahil, F. H. Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
  • Rahimi, G. Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
  • Rahimi, S.Behzad Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
  • Rahimi, Vahid Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
  • Rahmani, A. M. Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
  • Rahmanpour, M. A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
  • Rahmi, R. Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
  • Raj, S. R. Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
  • Rajabi, A. M. A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
  • Rajabi, M. Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
  • Rajabnejad, H. Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
  • Rajaee, M. Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
  • Raja. S, R. Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
  • Rajchakit, G. Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
  • Rakhshani, N. Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
  • Ramadan, D. O. Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
  • Ramezani Saadatabadi, A. Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
  • Ramtani, S. Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
  • Rasay, H. Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
  • Rashtian, M. Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
  • Rasiq, S. M. Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
  • Rayhan, S. B. Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts [Volume 34, Issue 1, 2021, Pages 243-252]
  • Raza, R. S. Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
  • Razavi, H. Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
  • Razavi, S. E. Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
  • Razmkhah, M. H. Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
  • Reddy, S.H. Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
  • Ren, J. J. The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
  • Rezaei, F. Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
  • Rezaei, H. A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
  • Reza Kashyzadeh, K. Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
  • Rezazadeh, G. Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
  • Rezvani, M. A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
  • Riabokon, E. P. Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
  • Rifai, S. Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
  • Riskiyah, I. R. High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
  • Rizal, A. Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
  • Rochardjo, H. S.B. Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
  • Rochman, T. High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
  • Rostami, M. Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
  • Rusli, N. S. N. Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
  • Rylnikova, M. V. Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
  • Rylnikova, M. V. Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]

S

  • Saadat, M. A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
  • Saadati, M. Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
  • Saboohi, Y. Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
  • Saboohi, Z. Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
  • Sabree, I. K. Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
  • Sadeghian, M.S. Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
  • Sadeghian, T. Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
  • Sadeghiyan, B. Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
  • Sadjadi, Seyed Mojtaba A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021]
  • Sadrnezhaad, S.K. Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
  • Saeidian, P. Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
  • Safaie, N. Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
  • Safaie, Naser Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021]
  • Safar, M. Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
  • Safari, M. Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
  • Safikhani, H. Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
  • Safikhani, H. Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
  • Safikhani, H. Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
  • Saghehei, E. A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
  • Saha, P. Reducing Quantum Cost for Reversible Realization of Densely-packed-decimal Converters [Volume 34, Issue 5, 2021, Pages 1284-1289]
  • Sahebi Hamrah, Z. New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
  • Sahith Reddy, S. Optimization of Calcined Bentonite Caly Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
  • Sahraeian, R. Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
  • Saidi-Mehrabad, M. A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
  • Saindane, U. V. Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
  • Saini, Dilip Kumar Jang Bahadur An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021]
  • Sajadi, S. M. Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
  • Sakthivel, V. P. Squirrel Search Optimization for Non-convex Multi-area Economic Dispatch [Volume 34, Issue 1, 2021, Pages 120-127]
  • Salehinai, S.R. Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
  • Salehpour, F. Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
  • Salim, U. A. Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
  • Samuel, S. Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
  • Saneei Siavashy, O. Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
  • Sanggoro, H. B. Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
  • Santos, T. F.A. Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
  • Sapronova, Z. Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
  • Sartika, J. Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
  • Sarvalishah, M. Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
  • Sassani, F. Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
  • Sathya, P. D. Squirrel Search Optimization for Non-convex Multi-area Economic Dispatch [Volume 34, Issue 1, 2021, Pages 120-127]
  • Sayari, A. Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
  • Sebt, M.H. The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
  • Sedaghat, M. Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
  • Sekhavat, M. Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
  • Sepas Hokmabadi, A. Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
  • Setyarini, P. H. Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
  • Seydi, V. Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
  • Seyed-Hosseini, S.M. A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
  • Sha, Y. Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
  • Shabakhty, N. The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
  • Shafaei, J. Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
  • Shafaei, J. Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
  • Shafaghat, R. Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
  • Shafaghat, R. Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
  • Shafaghizadeh, S. Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
  • Shafiee, M. Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
  • Shahgholi, M. Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
  • Shahmir, S. Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
  • Shahraini, S.I. Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
  • Shahrajabian, H. Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag [Volume 34, Issue 2, 2021, Pages 500-507]
  • Shaikhiev, I. Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
  • Shakurova, N. Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
  • Shamekhi Amiri, M. Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
  • Shamsi-Sarband, A. Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
  • Shams Moosavi, Seyed Mohammad A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021]
  • Sharafi, P. Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
  • Sharanya, A.G. Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
  • Sharifi, N. Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
  • Sheikh, K. Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag [Volume 34, Issue 2, 2021, Pages 500-507]
  • Sheikholharam Mashhadi, P. Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
  • Shoaei, O. Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
  • Shojaei, M.R. Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
  • Shojaei, M.R. Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
  • Shokoohi Rad, A. Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
  • Shokri, A. Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
  • Shuaib, N. A. Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
  • Singh, H. Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
  • Singh, N. K. Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
  • Singh, N. Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
  • Singh, Priti An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021]
  • Sirimontreea, S. Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
  • Sivandi-Pour, A. Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
  • Sobouti, M. A. Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
  • Solanki, C. H. An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
  • Soleimani-Amiri, S. Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
  • Soliman, N. F. Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
  • Soltani, F. Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
  • Song, N. Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
  • Soni, S. Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
  • Sreehari, V.M. Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
  • Sri Harsha, A. Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
  • Stephen, E. A. Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
  • Stroykov, G. A. System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
  • Subagyo, R. Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
  • Sudhakar Babu, S. Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
  • Sumardi, Dr. High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
  • Sun, C. Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
  • Sundjono, S. A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
  • Supandi, S. Simple Slope Stabilization on Quartz Sandstone using Horizontal Drain [Volume 34, Issue 4, 2021, Pages 1046-1051]
  • Suratgar, A. Abolfazl A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
  • Suresh, R. Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
  • Sureshkumar, D. Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
  • Sutarja, I.N. The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
  • Sverguzova, S. Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
  • Svistunov, O. Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]

T

  • Tabasi, M. Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
  • Tabasi, S. An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
  • Tabatabaee Moradi, S.S Study of Bonding Strength at Salt-cement Interface During Cementation of Salt Layers [Volume 34, Issue 2, 2021, Pages 581-586]
  • Tadarok, Samin A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
  • Taebi, M. A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
  • Taghaddos, H. The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
  • Taghilou, M. Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
  • Taghiyareh, F. Effect of Segregation on Opinion Formation in Scale-Free Social Networks: An Agent-based Approach [Volume 34, Issue 1, 2021, Pages 66-74]
  • Tahanian, E. A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
  • Taheri, A. A. Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
  • Taheri, E. Any-time randomized kinodynamic path planning algorithm in dynamic environments with application to quadrotor [Volume 34, Issue 10, 2021, Pages 2360-2370]
  • Taheri, M. Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
  • Taheri, M. Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
  • Tahmasbi, V. Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
  • Tahmsbi, V. Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
  • Tai, B. T. Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Talesh Amiri, S. Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
  • Tam, N. C. Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Tao, L. The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
  • Tariverdilo, S. Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
  • Tarokh, M. Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
  • Tavakkoli-Moghaddam, R. A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
  • Tavakkoli-Moghaddam, R. Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
  • Tavakoli, A. Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
  • Tavakoli, O. Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
  • Tavoosi, J. A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
  • Tezcan, H. O. Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
  • Thabah, S. Diamond Reducing Quantum Cost for Reversible Realization of Densely-packed-decimal Converters [Volume 34, Issue 5, 2021, Pages 1284-1289]
  • Thanh Tung, N. Experimental Analysis for Determination of Longitudinal Friction Coefficient Function in Braking Tractor Semi-trailer [Volume 34, Issue 7, 2021, Pages 1799-1803]
  • Thien, N. V. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Thongchom, C. Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
  • Thyagaraj, T. Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
  • Titouche, N. Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
  • Tiwan, H. Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
  • Toocharoen, S. The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
  • Torabi, A. Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
  • Torab-Mostaedi, M. Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
  • Torkaman, R. Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
  • Torres, E. A. Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
  • Trimulyono, A. Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
  • Triwardono, J. A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
  • Truong, D. V Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Tsigelnyuk, E. Y. Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
  • Turbakov, M. S. Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]

U

  • Unfried-Silgado, J. Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
  • Unyong, B. Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
  • Urazbakhtin, R. Y. Evaluating the Efficiency of Coal Loading ‎Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an ‎Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]

V

  • Vadivel, R. Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
  • Vafapour, M. Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
  • Vahidi, J. Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
  • Valinataj, M. An Enhanced Self-checking Carry Select Adder Utilizing the Concept of Self-checking Full Adder [Volume 34, Issue 2, 2021, Pages 433-442]
  • Valizadeh, S. Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
  • Vanu Madhav, V. V. Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
  • Vasegh, N. An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
  • Vasiya, V. An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
  • Veda Spandana, V Experimental study of YSZ and TiO2 Thermal Barrier Coated Piston effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021]
  • Venkata Vishnu, A. Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
  • Venkateswarlu, K Experimental study of YSZ and TiO2 Thermal Barrier Coated Piston effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021]
  • Venkateswarlu, K. Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
  • Veysi, F. Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
  • Vikram Kumar, Ch R. Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
  • Voynarenko, M. P. Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]

W

  • Waleed Jummah, N. Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
  • Wang, B. Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
  • Wang, Z. Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
  • Wani, S. B. Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
  • Widiyandari, H. Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
  • Wu, Y. Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]

Y

  • Yadav, Amit Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021]
  • Yadav, Anil Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021]
  • Yadav, K. Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
  • Yaghobi, H. Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
  • Yagoob, J. A. Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
  • Yahyazadeh, M. Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
  • Yang, J. Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
  • Yang, K. Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
  • Yarmohammadi, H. Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
  • Yousefi, M. Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
  • Yousefi, M. Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
  • Yousefi, M. Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
  • Yousefipour, A. Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
  • Yu, T. Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
  • Yudhanto, F. Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]

Z

  • Zainal, Z. A. Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
  • Zamanian, M. Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
  • Zandvakili, A. Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
  • Zare, H. Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
  • Zarei-Ghanavati, M. Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
  • Zarepor Ashkezari, A. Presenting a New Method for Earthquake Relief Center Location Allocation based on Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 769-781]
  • Zarepor Ashkezari, A. Location Allocation of Earthquake Relief Centers in Yazd City Based on Whale Optimization Algorithm [Volume 34, Issue 5, 2021, Pages 1184-1194]
  • Zavari, M. The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
  • Zeighami, E. Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
  • Zende, A. A. Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
  • Zhang, K. Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
  • Zhao, C. W. The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
  • Zhou, G. Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
  • Zhu, M. Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
  • Ziaratban, M. Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
  • Zirakian, T. Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
  • Zohrevand, A. Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
  • Zohrevand, A. Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
  • Zomorodian, R. Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]