Author Index

A

  • A, MANIVANNAN Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
  • A, Shamila Stability Assessment Metamorphic Approach (SAMA) for Effective Scheduling based on Fault Tolerance in Computational Grid [Volume 27, Issue 5, 2014, Pages 699-708]
  • A., Meysam Determination of Optimal Allocation and Penetration Level of Distributed Energy Resources Considering Short Circuit Currents [Volume 33, Issue 3, 2020, Pages 427-438]
  • Aaghaakouchak, A.A. A Study of Dynamic Characteristics of a Multistory Building Using Ambient Vibration Tests (TECHNICAL NOTE) [Volume 9, Issue 1, 1996, Pages 57-60]
  • Aazami, A. A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
  • A. Azami, M. A Review of the Control Techniques for Brushless Direct Current Motors (REVIEW PAPER) [Volume 12, Issue 1, 1999, Pages 49-67]
  • A. Azami, M. a Simple Speed Control Technique and Pulsating Torque Elimination Method in a Brushless Dc Motor [Volume 13, Issue 2, 2000, Pages 19-26]
  • Abasaeed, Ahmed E. Modeling of Riyadh Sewage Treatment Plant: 1-Model Development, Verification and Simulation [Volume 22, Issue 3, 2009, Pages 211-220]
  • Abazari, Amir Musa Couple Stress Effect on Micro/Nanocantilever-based Capacitive Gas Sensor [Volume 29, Issue 6, 2016, Pages 852-861]
  • Abbas, Faheem Reliability Analysis of Three Elements Series and Parallel Systems under Time-varying Fuzzy Failure Rate [Volume 27, Issue 4, 2014, Pages 553-560]
  • Abbas, H. O. Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
  • Abbas, H. O. Laboratory Study on Reinforced Expansive Soil with Granular Pile Anchors [Volume 33, Issue 7, 2020, Pages 1167-1172]
  • Abbas, H. O. Numerical Analysis of Stress Distribution During Tunneling in Clay Stone Rock [Volume 33, Issue 8, 2020, Pages 1472-1478]
  • Abbas, S. A. Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
  • Abbasghorbani, Morteza Prioritization of Transmission Network Components Based on their Failure Impact on the Reliability of Composite Power Systems [Volume 35, Issue 3, 2022]
  • Abbasi, A. Analysis of Shaded Pole Induction Motors Considering Asymmetrical Flux Distribution and Saturation Effects [Volume 9, Issue 4, 1996, Pages 189-200]
  • Abbasi, B. A Generalized Linear Statistical Model Approach to Monitor Profiles [Volume 20, Issue 3, 2007, Pages 233-242]
  • Abbasi, B. A Simple Transformation Method in Skewness Reduction [Volume 24, Issue 2, 2011, Pages 169-175]
  • Abbasi, B. A Closed-Form Formula for the Fair Allocation of Gains in Cooperative N-Person Games [Volume 25, Issue 4, 2012, Pages 303-310]
  • Abbasi, B. Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]
  • Abbasi, M Application of an Additive Self-tuning Controller for Static Synchronous Series Compensator for Damping of Sub-synchronous Resonance Oscillations [Volume 31, Issue 4, 2018, Pages 564-573]
  • Abbasi, M. Poultry Slaughterhouse Wastewater Treatment Using Anaerobic Fluid Bed Reactor and Aerobic Mobile-Bed Biological Reactor [Volume 32, Issue 5, 2019, Pages 634-640]
  • Abbasi, M. Efficient Parallelization of a Genetic Algorithm Solution on the Traveling Salesman Problem with Multi-core and Many-core Systems [Volume 33, Issue 7, 2020, Pages 1257-1265]
  • Abbasi, M. Effect of Non-uniform Magnetic Field on Non-newtonian Fluid Separation in a Diffuser [Volume 33, Issue 7, 2020, Pages 1354-1363]
  • Abbasi, Maysam Using Dynamic Thermal Rating and Energy Storage Systems Technologies Simultaneously for Optimal Integration and Utilization of Renewable Energy Sources [Volume 33, Issue 1, 2020, Pages 92-104]
  • Abbasi, M. H. Thermodynamic Investigation of Copper Removal From Liquid Slag. [Volume 5, Issue 3, 1992, Pages 99-104]
  • Abbasi, S. Autonomous Underwater Vehicle Hull Geometry Optimization Using a Multi-objective Algorithm Approach [Volume 31, Issue 9, 2018, Pages 1593-1601]
  • Abbasi, S. Investigation on Nose and Tail Shape Effects on Hydrodynamic Parameters in Autonomous Underwater Vehicles [Volume 31, Issue 12, 2018, Pages 2102-2108]
  • Abbasian, T. A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
  • Abbasi Hoseini, A. Flow Field Study Over the Wing of a Fighter-Type Aircraft Model [Volume 17, Issue 4, 2004, Pages 399-410]
  • Abbasi Nargesi, Farshad The Influence Of Process Control Agent (P.C.A)’S State on Expedition of Mechanical Alloying of Anostructure Tial(Γ) Alloy [Volume 23, Issue 2, 2010, Pages 139-146]
  • Abbasi Nargesi, Farshad Studying the Effect of Productive Factors on Synthesis of Anostructure Tial (Γ) Alloy By Mechanical Alloying [Volume 23, Issue 2, 2010, Pages 147-156]
  • Abbasi Nargesi, Farshad Synthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy [Volume 24, Issue 2, 2011, Pages 123-130]
  • Abbasnejad, Alireza An Experimental Investigation into the Arching Effect in Fine Sand [Volume 21, Issue 4, 2008, Pages 345-360]
  • Abbasnejad, Alireza Frictional Strain Hardening-softening in Experimental and Numerical Investigation of Arching Effect [Volume 28, Issue 2, 2015, Pages 180-189]
  • Abbasnejad, B. Stabilization of Electrostatically Actuated Micro-pipe Conveying Fluid Using Parametric Excitation [Volume 30, Issue 12, 2017, Pages 1911-1918]
  • Abbasnejad, Behrokh Stability Analysis in Parametrically Excited Electrostatic Torsional Micro-actuators [Volume 27, Issue 3, 2014, Pages 487-498]
  • Abbaspour, M. Wind Energy Estimation for Production of Electricity in Iran [Volume 10, Issue 1, 1997, Pages 19-26]
  • Abbaspour, M. Application of Boundary Element Method to 3 D Submerged Structures With Open Ends (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 97-104]
  • Abbaspour, Mohammad EXPERIMENTAL INVESTIGATION OF DRAG REDUCTION ON AHMED MODEL USING A COMBINATION OF ACTIVE FLOW CONTROL METHODS [Volume 24, Issue 4, 2011, Pages 403-410]
  • Abbaspour, S Loading Drug on Nanostructured Ti6Al4V-HA for Implant Applications [Volume 31, Issue 8, 2018, Pages 1159-1165]
  • Abbaspour, Z. Study of Pitting Corrosion Inhibition of Mild Steel by Nitrite in Concrete Pore Solution by Polarization and Zero Resistance Ammetery (ZRA) Techniques (RESEARCH NOTE) [Volume 22, Issue 4, 2009, Pages 369-380]
  • Abbaspour-sani, K. Sizing of a Packed Bed Storage for Solar Air Heating Systems (TECHNICAL NOTE) [Volume 16, Issue 2, 2003, Pages 155-162]
  • Abbaspour-sani, K. An Improved Modular Modeling for Analysis of Closed-Cycle Absorption Cooling Systems [Volume 21, Issue 1, 2008, Pages 57-70]
  • Abbaspour Sani, E. Design and Simulation of Hot Cathode Ionization Vacuum Gauge with no X-Ray Limitations [Volume 31, Issue 11, 2018, Pages 1883-1892]
  • Abbaspour-Sani, E A New Structure for 6 Bit Distributed MEMS Transmission LinePhase Shifter in Ku Band [Volume 31, Issue 2, 2018, Pages 315-321]
  • Abbass, M. M. Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
  • Abbassi, A. Numerical Modeling of Mold Filling and Curing in Non-Isothermal RTM Process (RESEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 391-400]
  • Abbassi, A. Unsteady Heat and Mass Transfer Near the Stagnation-point on a Vertical Permeable Surface: a Comprehensive Report of Dual Solutions [Volume 28, Issue 5, 2015, Pages 771-780]
  • Abbaszadeh, K. Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
  • Abbaszadeh, M.A. Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
  • Abbaszadeh, R. Laboratory Model Tests to Study the Behavior of Soil Wall Reinforced by Weak Reinforcing Layers [Volume 21, Issue 4, 2008, Pages 361-374]
  • Abbaszadehtoori, MANOUCHEHR Attitude Estimation of Nano-satellite according to Navigation Sensors using of Combination Method (TECHNICAL NOTE) [Volume 28, Issue 7, 2015, Pages 964-969]
  • Abd Al-Hamza, M. Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
  • Abd Ali, H. S. Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
  • Abdallah, K. S. A Collaborative Stochastic Closed-loop Supply Chain Network Design for Tire Industry [Volume 31, Issue 10, 2018, Pages 1715-1722]
  • Abd- Awn, S. H. Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
  • Abdelaati, R Emulation, Model Identification and New-approach Characterization of a PV Panel (TECHNICAL NOTE) [Volume 31, Issue 8, 2018, Pages 1222-1227]
  • Abd El-Hamid, M. Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]
  • Abdella, Galal EFFECT OF LOCATION OF EXPLANATORY VARIABLE ON MONITORING POLYNOMIAL QUALITY PROFILES [Volume 25, Issue 2, 2012, Pages 131-140]
  • Abdessemed, R. Improvement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC [Volume 31, Issue 10, 2018, Pages 1689-1697]
  • Abdi, F Project Scheduling with Simultaneous Optimization, Time, Net Present Value, and Project Flexibility for Multimode Activities with Constrained Renewable Resources [Volume 31, Issue 5, 2018, Pages 780-791]
  • Abdi, Javad Control of Multivariable Systems Based on Emotional Temporal Difference Learning Controller [Volume 17, Issue 4, 2004, Pages 363-376]
  • Abdi, M. R. Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils [Volume 32, Issue 3, 2019, Pages 373-380]
  • Abdideh, M. Investigation of the Effect of L-Ascorbic Acid on Class G Oil Well Cement [Volume 32, Issue 3, 2019, Pages 360-365]
  • Abdipour, A. A Novel Metamaterial Microelectromechanical Systems Phase Shifter with High Phase Shift and High Bandwidth [Volume 32, Issue 8, 2019, Pages 1163-1168]
  • Abdo, Maher Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism [Volume 27, Issue 1, 2014, Pages 157-170]
  • Abdolalipouradl, M. Energy and Exergy Analysis of a New Power, Heating, Oxygen and Hydrogen Cogeneration Cycle Based on the Sabalan Geothermal Wells [Volume 32, Issue 3, 2019, Pages 445-450]
  • Abdolalipouradl, M. Thermodynamic Analysis of New Cogeneration Cycle Based on Gaynarje Hotspring [Volume 33, Issue 6, 2020, Pages 1149-1155]
  • Abdoli, R. Experimental and Numerical Analysis of Permeability in Porous Media [Volume 33, Issue 11, 2020, Pages 2408-2415]
  • Abdollahi, Davoud A Numerical Improvement in Analyzing the Dynamic Characteristics of an Electrostatically Actuated Micro-beam in Fluid Loading with Free Boundary Approach [Volume 29, Issue 7, 2016, Pages 1005-1013]
  • Abdollahi, M. Reconstitution of Sand Specimens Using a Rainer System [Volume 30, Issue 10, 2017, Pages 1451-1463]
  • Abdollahi, Parvin An Iterative Decision Rule to minimize cost of Acceptance Sampling Plan in Machine Replacement Problem [Volume 27, Issue 7, 2014, Pages 1099-1106]
  • Abdollahi, Reza Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
  • Abdollahi, Seyed Mohammad Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE) [Volume 30, Issue 2, 2017, Pages 162-171]
  • Abdollahi Moghaddam, Mohammad Modeling Transport Phenomena in Selective Catalytic Reductant Catalytic Converter with NH3 as Reductant for NO Degradation [Volume 29, Issue 9, 2016, Pages 1183-1190]
  • Abdollahzade, Majid Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]
  • Abdollah-zadeh, A. Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
  • Abdollahzadeh, Gholamreza Evaluation of Damage Distribution in Elements of Dual Frames [Volume 25, Issue 4, 2012, Pages 279-288]
  • Abdollahzadeh, Gholamreza Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 293-306]
  • Abdollahzadeh, M. Allocation of Posts to a Tele-Communication Center Through Kavos (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 73-78]
  • Abdollahzadeh Sharghi, E. The Influence of Short Values of Hydraulic and Sludge Retention Time on Performance of a Membrane Bioreactor Treating Sunflower Oil Refinery Wastewater [Volume 30, Issue 10, 2017, Pages 1417-1424]
  • Abdollahzadeh Sharghi, Elham The Study of Organic Removal Efficiency and Membrane Fouling in a Submerged Membrane Bioreactor Treating Vegetable Oil Wastewater [Volume 29, Issue 12, 2016, Pages 1642-1649]
  • Abdollahzadeh Sharghi, Elham Performance of Continuous Electrocoagulation Process for Turbidity Removal from Sand Filter Backwash Water [Volume 32, Issue 12, 2019, Pages 1696-1703]
  • Abdolmajidi, M. Thermodynamic Modeling the Solubility of CO2 in Aqua System of Methyldiethanolamine and 2-(2-Aminoethylamino)ethanol Using the Nonelectrolyte Wilson Nonrandom Factor [Volume 33, Issue 12, 2020, Pages 2436-2442]
  • Abdolmaleki, A. Preparation and Characterization of SiO2-CaCl2 Nanocomposite by the Sol-Gel Method [Volume 22, Issue 3, 2009, Pages 299-305]
  • Abdolrahimi, H. A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
  • Abdoos, A. A. A New Restricted Earth Fault Relay Based on Artificial Intelligence [Volume 32, Issue 1, 2019, Pages 62-70]
  • Abdoos, A. A. A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
  • Abdoulzadeh, A. Beneflciation Studies of Bama Oxidized Lead and Zinc Ore [Volume 10, Issue 3, 1997, Pages 173-180]
  • Abdul Ghani, Mohamad Experimental Studies on Savonius-type Vertical Axis Turbine for Low Marine Current Velocity [Volume 26, Issue 1, 2013, Pages 91-98]
  • Abdul Halim, A. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Abdul Kadir, A. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Abdul Kaream, K. W. Assessment of Changes in Shear Strength Parameters for Soils below Circular Machine Foundation [Volume 33, Issue 8, 2020, Pages 1491-1498]
  • Abdullah, A. H. Interaction Effect of Depth of Cut, Back Rake Angle and Rock Properties on Temperature of Single Polycrystalline Diamond Compact Cutter [Volume 33, Issue 11, 2020, Pages 2425-2435]
  • Abdullah, A. Z. Pretreated Palm Oil Mill Effluent (POME) Digestion in an Up-Flow Anaerobic Sludge Fixed Film Bioreactor: a Comparative Study [Volume 19, Issue 1, 2006, Pages 1-9]
  • Abdullah, Noor Halizah Effects of Compactor Types on Aggregate Orientation of Asphalt Mixtures [Volume 26, Issue 7, 2013, Pages 677-684]
  • Abdullah, T. H. Numerical Analysis of Stress Distribution During Tunneling in Clay Stone Rock [Volume 33, Issue 8, 2020, Pages 1472-1478]
  • Abdullah, W. N. A. S Performance Evaluation of Hybrid Coagulation/Nanofiltration Process for AT-POME Treatment [Volume 31, Issue 8, 2018, Pages 1430-1436]
  • Abdul Latiff, Ab A. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • AbdulMajeed Allawi, Abbas Structural Behavior of Axially Loaded Composite Concrete-steel Plate Shear Walls [Volume 32, Issue 11, 2019, Pages 1548-1558]
  • Abdul Rahim, H Analysis of Bacterial Contaminant in Pasir Gudang, Johor Tap Water Supply–Varies pH Value Observation [Volume 31, Issue 8, 2018, Pages 1455-1463]
  • Abdul Rahman, Ahmad Baharuddin Seismic Performance of Low-Ductility Precast Wall Structure with Base Isolation [Volume 26, Issue 2, 2013, Pages 153-162]
  • AbdulRahman, Sh. Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
  • Abdul Rahman–Al Ezzi, A. An Experimental Investigation of Synergistic Pulsation Bubble Column with Inverse Fluidized Loop Reactor for Removing Chloroform from Wastewater [Volume 33, Issue 11, 2020, Pages 2120-2126]
  • Abdulridha, A. A. Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
  • Abdul Samad, Abdul Aziz Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips [Volume 28, Issue 5, 2015, Pages 671-676]
  • Abedi, M. Lightning Protection of Ehv Substations in Iran [Volume 2, Issue 3, 1989, Pages 104-111]
  • Abedi, M. The Effect of Percentage of Remaining Hair Bred and Ambient Relative Humidity on Electrical Resistance of Cashmere Fiber [Volume 15, Issue 2, 2002, Pages 205-212]
  • Abedi, M. An Experimental Study on Geogrid with Geotextile Effects Aimed to Improve Clayey Soil [Volume 32, Issue 5, 2019, Pages 685-692]
  • Abedi, M. Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
  • Abedi, M. Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
  • Abedi, Saeed An Intelligent Algorithm based Controller for Multiple Output DC-DC Converters with Voltage Mode Weighting Factor [Volume 27, Issue 6, 2014, Pages 889-898]
  • Abedini, E. The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux [Volume 33, Issue 8, 2020, Pages 1590-1597]
  • Abedini, R. The Energy and Exergy Analysis of Integrated Hydrogen Production System Using High Temperature Steam Electrolysis with Optimized Water Path (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 893-900]
  • Abedini, V. Cutting Forces and Tool Wear Investigation for Face Milling of Bimetallic Composite Parts Made of Aluminum and Cast Iron Alloys [Volume 33, Issue 6, 2020, Pages 1142-1148]
  • Abedini-Ahangarkola, H. Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
  • Abedi Pahnekollaei, S. M. Optimal Design of a Brushless DC Motor, by Cuckoo Optimization Algorithm (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 668-677]
  • Abessi, O. Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
  • Abghari, Ramin Design of a New Instrument for Measuring Frictional Properties of Woven Fabrics [Volume 24, Issue 4, 2011, Pages 387-392]
  • Abhigna, D. Effect of Gap Acceptance Behavior of the Right Turning Vehicles on the Major Road Stream for Uncontrolled Three-Legged Intersections under Mixed Traffic Conditions [Volume 31, Issue 6, 2018, Pages 870-876]
  • Abjadi, Navid Design and Implementation of a Constant Frequency Sliding Mode Controller for a Luo Converter [Volume 29, Issue 2, 2016, Pages 202-210]
  • Abjadi, N. R. A Novel Stand-Alone Single-Phase Induction Generator Using a Three-Phase Machine and a Single-Phase PWM Inverter [Volume 16, Issue 3, 2003, Pages 259-268]
  • Abjadi, N. R. An Adaptive Nonlinear Controller for Speed Sensorless PMSM Taking the Iron Loss Resistance into Account (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 151-160]
  • Abjadi, N. R. Nonlinear Control for Positive Output Super Lift Luo Converter in Stand Alone Photovoltaic System [Volume 33, Issue 2, 2020, Pages 237-247]
  • Abolfazlzadeh, M. Statistical Analysis of the Railway Accidents Causes in Iran (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1822-1830]
  • Abolghasemi, A.H. A Size-dependent Bernoulli-Euler Beam Formulation based on a New Model of Couple Stress Theory [Volume 27, Issue 6, 2014, Pages 951-960]
  • Abolghasemi, Ali A Novel Volcano Smoke Antenna with Optimal Shape [Volume 26, Issue 3, 2013, Pages 263-276]
  • Abolghasemi, V. Iterative Weighted Non-smooth Non-negative Matrix Factorization for Face Recognition [Volume 31, Issue 10, 2018, Pages 1698-1707]
  • Abolhassani, M. R. Acousto-Refrigerator with an Adjustable Mechanical Resonator (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 183-196]
  • Abooei, M. H. A POMDP Framework to Find Optimal Inspection and Maintenance Policies via Availability and Profit Maximization for Manufacturing Systems [Volume 31, Issue 12, 2018, Pages 2077-2084]
  • Abooei, M. H. Designing a Model for Creation of Export Consortiain Business Cluster [Volume 33, Issue 3, 2020, Pages 459-467]
  • Abooie, M. Modelling and Decision-making on Deteriorating Production Systems using Stochastic Dynamic Programming Approach [Volume 31, Issue 12, 2018, Pages 2052-2058]
  • Abooie, M. H. Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]
  • Abooie, Mohammad hossein A Nonlinear Autoregressive Model with Exogenous Variables Neural Network for Stock Market Timing: The Candlestick Technical Analysis [Volume 29, Issue 12, 2016, Pages 1717-1725]
  • Abootorabi Zarchi, H. Robust Optimal Speed Tracking Control of a Current Sensorless Synchronous Reluctance Motor Drive using a New Sliding Mode Controller [Volume 17, Issue 2, 2004, Pages 155-170]
  • Abouabdellah, A. Identification of the Patient Requirements Using Lean Six Sigma and Data Mining [Volume 30, Issue 5, 2017, Pages 691-699]
  • Abouali, O. Three-Dimensional Simulation of Airflow and Nano-Particle Beam Focusing in Aerodynamic Lenses(RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 45-54]
  • Abouali, O. Micro Particles Transport and Deposition in Realistic Geometry of Human Upper Airways [Volume 25, Issue 4, 2012, Pages 315-322]
  • Aboutalebi, Seyed Hamed Modeling of Compressive Strength of Metakaolin Based Geopolymers by The Use of Artificial Neural Network RESEARCH NOTE) [Volume 23, Issue 2, 2010, Pages 145-152]
  • Abrahim, M. J. Effect of Matric Suction on Deformation of Gypseous Sand Using Modified Oedometer [Volume 34, Issue 12, 2021, Pages 2636-2641]
  • Abtahi, Z. A New Approach Generating Robust and Stable Schedules in m-Machine Flow Shop Scheduling Problems: A Case Study [Volume 33, Issue 2, 2020, Pages 293-303]
  • Abtahi, Z. A Stochastic Model for Prioritized Outpatient Scheduling in a Radiology Center [Volume 33, Issue 4, 2020, Pages 598-606]
  • Abtahi, Z. Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
  • Abu Bakar, Rosli Effect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile [Volume 21, Issue 3, 2008, Pages 291-302]
  • Abu Bakar, Rosli An Experimental Investigation of Diesel Engines Fuel Injection Pressure Effect on Power Performance and Fuel Consumption [Volume 22, Issue 1, 2009, Pages 91-97]
  • Achyutha kumar reddy, M. Optimization of Calcined Bentonite Caly Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
  • Adabi firouzjaee, Jafar A High Gain Bipolar Pulse Generator with Low Voltage Input Source [Volume 32, Issue 8, 2019, Pages 1126-1133]
  • Adabi Firouzjaee, J Distributed Generation Expansion Planning Considering Load Growth Uncertainty: A Novel Multi-Period Stochastic Model [Volume 31, Issue 3, 2018, Pages 405-414]
  • Adam, M. R Evaluating the Sintering Temperature Control Towards the Adsorptivity of Ammonia onto the Natural Zeolite Based Hollow Fibre Ceramic Membrane [Volume 31, Issue 8, 2018, Pages 1398-1405]
  • Adami, M. Transient Two-Dimensional (r-z) Cyclic Charging/Discharging Analysis of Space Thermal Energy Storage Systems (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 205-210]
  • Adami, P. Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
  • Adham, K. Prediction of Temperature Profile of a Buried Gas Pipeline Through Utilization of Corresponding States Principle [Volume 2, Issue 1, 1989, Pages 1-4]
  • Adi, W. A. Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
  • Adibee, Nabiollah An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
  • Adibi, A. Simulation and Design of an Organic Quantum Film Electrooptic Switch [Volume 8, Issue 4, 1995, Pages 191-198]
  • Adibi, A. Semiconductor Device Simulation by a New Method of Solving Poisson, Laplace and Schrodinger Equations (RESEARCH NOTE) [Volume 13, Issue 1, 2000, Pages 89-94]
  • Adibi, M Experimental and Numerical Investigation of Two Different Traditional Hand-Baking Flatbread Bakery Units in Kashan, Iran [Volume 31, Issue 8, 2018, Pages 1292-1301]
  • Adibi, Omid A Characteristic-based Solution of Forced and Free Convection in Closed Domains with Emphasis on Various Fluids [Volume 32, Issue 11, 2019, Pages 1689-1695]
  • Adibi, Omid A Characteristic-based Numerical Simulation of Water-titanium Dioxide Nano-fluid in Closed Domains [Volume 33, Issue 1, 2020, Pages 158-163]
  • Adibi, T. Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
  • Adibi, Tohid A Characteristic-based Solution of Forced and Free Convection in Closed Domains with Emphasis on Various Fluids [Volume 32, Issue 11, 2019, Pages 1689-1695]
  • Adibi, Tohid A Characteristic-based Numerical Simulation of Water-titanium Dioxide Nano-fluid in Closed Domains [Volume 33, Issue 1, 2020, Pages 158-163]
  • Adilla Subha, N Analysis of Bacterial Contaminant in Pasir Gudang, Johor Tap Water Supply–Varies pH Value Observation [Volume 31, Issue 8, 2018, Pages 1455-1463]
  • Adlparvar, M.R. Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
  • Adnan, Azlan Seismic Performance of Low-Ductility Precast Wall Structure with Base Isolation [Volume 26, Issue 2, 2013, Pages 153-162]
  • Adri, A. Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
  • Adriansyah, Y Determining of Geotechnical Domain Based on Joint Density and Fault Orientation at Batu Hijau Mine,West Sumbawa-Indonesia (TECHNICAL NOTE) [Volume 31, Issue 4, 2018, Pages 679-683]
  • Afarin, M Conjugated Linoleic Acid Production and Optimization Via Catalytic Reaction Method Using Safflower Oil [Volume 31, Issue 8, 2018, Pages 1166-1171]
  • Afjei, E. A Novel Disc-Type Reluctance Motor [Volume 10, Issue 1, 1997, Pages 11-18]
  • Afjei, E. a New Resonant Converter Circuit for Reluctance [Volume 12, Issue 2, 1999, Pages 69-80]
  • Afjei, E. an Efficient Drive Circuit for Switched Reluctance Motor [Volume 12, Issue 3, 1999, Pages 137-143]
  • Afjei, E. A Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor [Volume 14, Issue 3, 2001, Pages 201-208]
  • Afjei, E. Significant Error Propagation in the Finite Difference Solution of Non-Linear Magnetostatic Problems Utilizing Boundary Condition of the Third Kind [Volume 16, Issue 4, 2003, Pages 319-330]
  • Afjei, E. Automatic Phase Advancing in Switched Reluctance Motor by Employing an Electronic Governor for a Desired Speed Angle Profile [Volume 17, Issue 1, 2004, Pages 11-18]
  • Afjei, E. A New Hybrid Brushless DC Motor/Generator without Permanent Magnet [Volume 20, Issue 1, 2007, Pages 77-86]
  • Afjei, E. A Novel Two Phase Hybrid Switched Reluctance Motor/Field-Assisted Generator: Concept, Simulation, and Experimental Confirmation [Volume 22, Issue 4, 2009, Pages 357-368]
  • Afjei, E. Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
  • Afjei, Ebrahim Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor [Volume 27, Issue 1, 2014, Pages 143-156]
  • Afjei, Ebrahim Comprehensive Design Procedure and Manufacturing of Permanent Magnet Assisted Synchronous Reluctance Motor [Volume 32, Issue 9, 2019, Pages 1299-1305]
  • Afkar, A. Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
  • Afkar, A. A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
  • Afrakoti, I. E. P. Face Recognition in Thermal Images based on Sparse Classifier [Volume 32, Issue 1, 2019, Pages 78-84]
  • Afrang, S. Study of Volumetric Flow Rate of a Micropump Using a Non-classical Elasticity Theory [Volume 31, Issue 6, 2018, Pages 986-996]
  • Afrang, S. A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
  • Afshang, Hamid Voltage Regulation of DC-DC Series Resonant Converter Operating in Discontinuous Conduction Mode: The Hybrid Control Approach [Volume 32, Issue 11, 2019, Pages 1610-1619]
  • Afshar, A. Pretreatment of Gray Cast Iron for Hard Chromium Electroplating (RESEARCH NOTES) [Volume 13, Issue 2, 2000, Pages 81-84]
  • Afshar, A. Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
  • Afshar, A. A Study of Zeta Potential of Plasma Sprayed Hydroxyapatite Coating in Four Simulated Physiological Solutions [Volume 16, Issue 4, 2003, Pages 343-354]
  • Afshari, E Enhancement of the Cooling System Performance of the Proton-exchange Membrane Fuel Cell By Baffle-restricted Coolant Flow Channels [Volume 31, Issue 5, 2018, Pages 812-819]
  • Afshin, Hossein Hydrodynamics Analysis of Density Currents [Volume 21, Issue 3, 2008, Pages 211-226]
  • Aftabi Sani, A Free Vibration of a Generalized Plane Frame [Volume 31, Issue 4, 2018, Pages 538-547]
  • Aftabi Sani, Ahmad Free Vibration Analysis of a Sloping-frame: Closed-form Solution versus Finite Element Solution and Modification of the Characteristic Matrices (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 378-386]
  • Aftabi Sani, Ahmad Free Vibration Analysis of a Six-degree-of-freedom Mass-spring System Suitable for Dynamic Vibration Absorbing of Space Frames [Volume 30, Issue 1, 2017, Pages 30-39]
  • Afzali, P. Effect of Deformation-Induced Defects on the Microstructure and Pitting Corrosion Behavior of Al-Ag Alloy [Volume 31, Issue 12, 2018, Pages 2092-2101]
  • Agahi, H. Plant Classification in Images of Natural Scenes Using Segmentations Fusion [Volume 33, Issue 9, 2020, Pages 1743-1750]
  • Agarwal, Priyanka MARKOVIAN SOFTWARE RELIABILITY MODEL FOR TWO TYPES OF FAILURES WITH IMPERFECT DEBUGGING RATE AND GENERATION OF ERRORS [Volume 25, Issue 2, 2012, Pages 177-188]
  • Agarwal, Priyanka MARKOVIAN SOFTWARE RELIABILITY MODEL FOR TWO TYPES OF FAILURES WITH IMPERFECT DEBUGGING RATE AND GENERATION OF ERRORS [Volume 25, Issue 2, 2012, Pages 177-188]
  • Agarwal, Priyanka Fuzzy Reliability Evaluation of a Repairable System with Imperfect Coverage, Reboot and Common-cause Shock Failure [Volume 25, Issue 3, 2012, Pages 231-238]
  • Agarwal, Priyanka Stability and Numerical Analysis of Malaria- mTB- HIV/AIDS Co-infection (TECHNICAL NOTE) [Volume 26, Issue 7, 2013, Pages 729-742]
  • Agarwal, Priyanka Availability of k-out-of-n: F Secondary Subsystem with General Repair Time Distribution [Volume 26, Issue 7, 2013, Pages 743-752]
  • Agarwal, Priyanka Performance Analysis of a Repairable Robot Safety System with Standby, Imperfect Coverage and Reboot Delay [Volume 26, Issue 9, 2013, Pages 1077-1088]
  • Agarwal, R. Impact Analysis of Variation in Geometrical Features on Intrinsic Characteristics of Capacitive Micro-machined Ultrasonic Transducers [Volume 31, Issue 11, 2018, Pages 1846-1851]
  • Aggarwal, P. Modeling of Unreinforced and Reinforced Pavement Composite Material Using HISS Model (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 13-22]
  • Aggarwal, P. Estimation of Punching Shear Capacity of Concrete Slabs Using Data Mining Techniques [Volume 32, Issue 7, 2019, Pages 908-914]
  • Aggarwal, Y. Estimation of Punching Shear Capacity of Concrete Slabs Using Data Mining Techniques [Volume 32, Issue 7, 2019, Pages 908-914]
  • Aghaali, E Nitrate Removal from Aqueous Solutions Using Granular Activated Carbon Modified with Iron Nanoparticles (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 554-563]
  • Agha Amini Fashami, H. The Effect of Rapid Deformation Process to Improve Creep and Tensile Resistance of AZ91 Magnesium Alloy Plates [Volume 33, Issue 10, 2020, Pages 2039-2046]
  • Aghababa, H. Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
  • Aghabagheri, R. A Phase Noise Reduction Technique in LC Cross-coupled Oscillators with Adjusting Transistors Operating Regions [Volume 33, Issue 4, 2020, Pages 560-566]
  • Aghabozorgi, M. R. Blind Separation of Jointly Stationary Correlated Sources [Volume 16, Issue 4, 2003, Pages 331-346]
  • Aghaei, A. Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
  • Aghaie, A. A Novel Excellence Model of the ICT Industry: Case Study on Telecommunications Backbone Network of Iran [Volume 33, Issue 10, 2020, Pages 2016-2029]
  • Aghajani, H Parametric Optimization of Electro Spark Microwelding of Aluminum Clad Steel (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1146-1151]
  • Aghajani, H. A Hybrid Fuzzy Multi-criteria Decision Making Model Based on Fuzzy DEMATEL with Fuzzy Analytical Network Process and Interpretative Structural Model for Prioritizing LARG Supply Chain Practices [Volume 32, Issue 3, 2019, Pages 413-423]
  • Aghajani, K. Speech Emotion Recognition Using Scalogram Based Deep Structure [Volume 33, Issue 2, 2020, Pages 285-292]
  • Aghajanian, Soheil Sequential Microwave-assisted Extraction for Isolation of Quercetin from Red Kidney Bean [Volume 33, Issue 1, 2020, Pages 12-17]
  • Aghajanian, Soheila Sequential Microwave-assisted Extraction for Isolation of Quercetin from Red Kidney Bean [Volume 33, Issue 1, 2020, Pages 12-17]
  • Aghajani Delavar, mojtaba Investigation of Thermo-hydraulic Performance of Circular Tube Fitted with Center-cleared Twisted Tape Using CFD Modeling (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 476-482]
  • Aghajani-Delavar, Naeem Design of a New Mathematical Model for Integrated Dynamic Cellular Manufacturing Systems and Production Planning [Volume 28, Issue 5, 2015, Pages 746-754]
  • Aghajanzadeh, Omid An Investigation on the Effects of Gas Pressure Drop in Heat Exchangers on Dynamics of a Free Piston Stirling Engine [Volume 30, Issue 2, 2017, Pages 294-302]
  • Aghamohagheghi, M. Soft Computing-based New Interval-valued Pythagorean Triangular Fuzzy Multi-criteria Group Assessment Method without Aggregation: Application to a Transport Projects Appraisal [Volume 32, Issue 5, 2019, Pages 737-746]
  • Agha Shafiyi, M. Evaluating Technical Requirements to Achieve Maximum Power Point in Photovoltaic Powered Z-Source Inverter [Volume 31, Issue 6, 2018, Pages 921-931]
  • Aghazadeh, H. Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
  • Aghazadeh, Hadi Comprehensive Design Procedure and Manufacturing of Permanent Magnet Assisted Synchronous Reluctance Motor [Volume 32, Issue 9, 2019, Pages 1299-1305]
  • Aghazadeh, J. Effects of Tungsten on the Pearlite Reaction in a Eutectoid Steel [Volume 8, Issue 3, 1995, Pages 147-158]
  • Aghnout, Soraya Modeling of Substrate Noise Impact on a Single-Ended Cascode LNA in a Lightly Doped Substrate (RESEARCH NOTE) [Volume 23, Issue 1, 2010, Pages 23-28]
  • Aghsami, A. A Post-disaster Assessment Routing Multi-objective Problem under Uncertain Parameters [Volume 33, Issue 12, 2020, Pages 2503-2508]
  • Agrawal, Yash Towards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer [Volume 29, Issue 4, 2016, Pages 554-562]
  • Agustina, T. E Characterization and Utilization of Zeolite for NPK Slow Release Fertilizer (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 622-628]
  • Agustina, T. E The Effect of Air Fuel Ratio and Temperature on Syngas Composition and Calorific Value Produced from Downdraft Gasifier of Rubber Wood-Coal Mixture [Volume 31, Issue 9, 2018, Pages 1480-1486]
  • Ahadi, M. R. Single-vehicle Run-off-road Crash Prediction Model Associated with Pavement Characteristics [Volume 33, Issue 7, 2020, Pages 1375-1386]
  • Ahadi Akhlaghi, I. Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
  • Ahamd, R. A. R The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
  • Ahangarani, shahrokh A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition [Volume 29, Issue 5, 2016, Pages 677-687]
  • Ahifar, A. Finite Time Terminal Synergetic Controller for Nonlinear Helicopter Model [Volume 32, Issue 2, 2019, Pages 236-241]
  • Ahma, A The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
  • Ahmad, A. L Extraction of Acetaminophen from Aqueous Solution by Emulsion Liquid Membrane Using Taylor-Couette Column [Volume 31, Issue 8, 2018, Pages 1413-1420]
  • Ahmad, Furkan Analysis of Flashover Voltages of Disc Type Insulator under Artificial Pollution Condition (TECHNICAL NOTE) [Volume 29, Issue 6, 2016, Pages 762-768]
  • Ahmad, R. A. R Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
  • Ahmadi, B. Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
  • Ahmadi, Elham Optimal Process Adjustment with Considering Variable Costs for Uni-variate and Multi-variate Production Process (RESEARCH NOTE) [Volume 27, Issue 4, 2014, Pages 561-572]
  • Ahmadi, Elham A Nonlinear Autoregressive Model with Exogenous Variables Neural Network for Stock Market Timing: The Candlestick Technical Analysis [Volume 29, Issue 12, 2016, Pages 1717-1725]
  • Ahmadi, F. Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment [Volume 32, Issue 2, 2019, Pages 184-192]
  • Ahmadi, G Closed-loop Supply Chain Inventory-location Problem with Spare Parts in a Multi-Modal Repair Condition [Volume 31, Issue 2, 2018, Pages 346-356]
  • Ahmadi, Goodarz Deposition of Various Shapes Particles on a Rough Surface in Turbulent Flow [Volume 15, Issue 3, 2002, Pages 299-310]
  • Ahmadi, Goodarz Can the History Force be Neglected for the Motion of Particles at High Subcritical Reynolds Number Range? [Volume 19, Issue 1, 2006, Pages 23-34]
  • Ahmadi, Goodarz Three-Dimensional Simulation of Airflow and Nano-Particle Beam Focusing in Aerodynamic Lenses(RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 45-54]
  • Ahmadi, Goodarz Development of a Low Cost and Safe PIV for Mean Flow Velocity and Reynolds Stress Measurements [Volume 20, Issue 2, 2007, Pages 105-116]
  • Ahmadi, Goodarz Computational Simulation of Hydrodynamic Convection in Rising Bubble Under Microgravity Condition [Volume 22, Issue 3, 2009, Pages 295-305]
  • Ahmadi, Goodarz Micro Particles Transport and Deposition in Realistic Geometry of Human Upper Airways [Volume 25, Issue 4, 2012, Pages 315-322]
  • Ahmadi, H. Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
  • Ahmadi, Hamid Reza The Effect of Analysis Methods on the Response of Steel Dual-System Frame Buildings for Seismic Retrofitting [Volume 22, Issue 4, 2009, Pages 317-331]
  • Ahmadi, I. Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
  • Ahmadi, Kamran PHASE STABILITY AND CONDUCTIVITY OF δ-Bi2O3 WITH MIXTURE OF YTTRIUM AND YTTERBIUM OXIDES [Volume 25, Issue 2, 2012, Pages 159-164]
  • Ahmadi, M. A Secure Routing Algorithm for Underwater Wireless Sensor Networks [Volume 31, Issue 10, 2018, Pages 1659-1665]
  • Ahmadi, M. Numerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading [Volume 33, Issue 8, 2020, Pages 1529-1543]
  • Ahmadi, M. Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
  • Ahmadi, Mohammad Hossein Prediction of Engineered Cementitious Composite Material Properties Using Artificial Neural Network [Volume 32, Issue 11, 2019, Pages 1534-1542]
  • Ahmadi, S. Influences of Surface Characteristics and Modified Asphalt Binders on Interface Shear Strength [Volume 32, Issue 6, 2019, Pages 805-812]
  • AHMADI, AHMAD Waterhammer Caused by Intermittent Pump Failure in Pipe Systems Including Parallel Pump Groups [Volume 29, Issue 4, 2016, Pages 444-453]
  • Ahmadian, M Fracture Mechanism of CoCrMo Porous Nano-composite Prepared by Powder Metallurgy Route [Volume 31, Issue 1, 2018, Pages 19-24]
  • Ahmadian, M. T. Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
  • Ahmadian-Attari, Mahmoud Multilevel Input Ring-Tcm Coding Scheme: a Method for Generating High-Rate Codes [Volume 14, Issue 3, 2001, Pages 209-214]
  • Ahmadikia, H. Adaptation of Structured Grid for Supersonic and Transonic Flows [Volume 14, Issue 4, 2001, Pages 385-392]
  • Ahmadikia, Hossein Analytical Analysis of The Dual-phase-lag Heat Transfer Equation in a Finite Slab with Periodic Surface Heat Flux (RESEARCH NOTE) [Volume 27, Issue 6, 2014, Pages 971-978]
  • Ahmaditabar, K. Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
  • Ahmadi Yazdi, Ahmad A Two Stage Stochastic Programming Model of the Price Decision Problem in the Dual-channel Closed-loop Supply Chain [Volume 28, Issue 5, 2015, Pages 738-745]
  • Ahmadizar, F Modeling the Trade-off between Manufacturing Cell Design and Supply Chain Design [Volume 31, Issue 4, 2018, Pages 640-647]
  • Ahmadizar, F. A Hybrid Genetic Algorithm for Integrated Production and Distribution Scheduling Problem with Outsourcing Allowed [Volume 33, Issue 11, 2020, Pages 2285-2298]
  • Ahmad Jasim, H. The Effect of Speed Humps on Highways Pavement Condition [Volume 33, Issue 5, 2020, Pages 737-743]
  • Ahmad Moazam, M. Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
  • Ahmadnejad, Javad A MEMS Capacitive Microphone Modelling for Integrated Circuits [Volume 28, Issue 6, 2015, Pages 888-895]
  • Ahmadvand, Mehdi Evaluation of Ultimate Torsional Strength of Reinforcement Concrete Beams Using Finite Element Analysis and Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 501-508]
  • Ahmadvanda, Alimohammad Impact of Service on Customers’ Demand and Members’ Profit in Supply Chain [Volume 25, Issue 3, 2012, Pages 213-222]
  • Ahmadyfard, A. R. Super-resolution of License-plates Using Weighted Interpolation of Neighboring Pixels from Video Frames [Volume 33, Issue 5, 2020, Pages 992-999]
  • Ahmadzadeh, M. R. DPML-Risk: An Efficient Algorithm for Image Registration [Volume 31, Issue 11, 2018, Pages 1862-1869]
  • Ahmadzadehtalatapeh, Mohammad Energy Conservation Potential of the Heat Pipe Heat Exchangers: Experimental Study and Predictions [Volume 25, Issue 3, 2012, Pages 193-200]
  • Ahmadzadehtalatapeh, Mohammad Fully Fresh Air Air-conditioning System Equipped with Double Heat Pipe Based Heat Recovery Technology [Volume 26, Issue 1, 2013, Pages 51-58]
  • Ahmadzadehtalatapeh, Mohammad Performance Study of a Solar Integrated Central Heating System of a Residential Building Using Trnsys- an Hourly Simulation Model (RESEARCH NOTE) [Volume 27, Issue 3, 2014, Pages 457-466]
  • Ahmed, Ehsan Finite Element Prediction of the Behavior of Profiled Steel Sheet Dry Board Folded Plate Structures an Improved Model (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 21-32]
  • Ahmed, Foez A Multiband Multiple-input Multiple-output Antenna System for Long Term Evolution and Wireless Local Area Networks Handsets [Volume 29, Issue 8, 2016, Pages 1087-1093]
  • Ahmed, Mohammed Altaf Embedded Memory Test Strategies and Repair [Volume 30, Issue 6, 2017, Pages 839-845]
  • Ahmed, S. Prediction of Fluid Flow and Heat Transfer Characteristics Behind a Single Backward-Facing Step [Volume 5, Issue 1, 1992, Pages 61-68]
  • Ahmed, S. A Numerical Study on Mixing of Transverse Injection in Supersonic Combustor [Volume 17, Issue 1, 2004, Pages 85-98]
  • Ahmed Al-dujaili, M. A. Optimizing the Properties of Metakaolin-based (Na, K)-Geopolymer Using Taguchi Design Method [Volume 33, Issue 4, 2020, Pages 631-638]
  • Ahmed G. M., F. Control of Nozzle Flow Using Microjets at Supersonic Mach Regime [Volume 32, Issue 7, 2019, Pages 991-998]
  • Ahmed Naqash, J. Effect of Antifreeze Admixtures on Cold Weather Concrete [Volume 32, Issue 3, 2019, Pages 366-372]
  • Ahmed Naqash, J. Experimental Study on TGA, XRD and SEM Analysis of Concrete with Ultra-fine Slag (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 679-684]
  • Ahmed Naqash, J. Effect of Alccofine on Mechanical and Durability Index Properties of Green Concrete (TECHNICAL NOTE) [Volume 32, Issue 6, 2019, Pages 813-819]
  • Ai, Z. Reliability Evaluation of a Disaster Airflow Emergency Control System Based on Bayesian Networks [Volume 33, Issue 11, 2020, Pages 2416-2424]
  • Aiadi, K. E. Experimental Study of a Flash-lamp Pumped Passively Q-Switched Nd:YAG Laser Using Cr4+:YAG Saturable Absorber [Volume 31, Issue 11, 2018, Pages 1870-1875]
  • Ajabshirchy, Y. Investigation of the Effect of Exhaust Gas Recirculation (EGR) on pollutants Emission From Si Engine Exhaust Gasese (RESEARCH NOTES) [Volume 11, Issue 2, 1998, Pages 115-120]
  • Ajabshirchy, Y. The Theoretical and Experimental Investigation of the Effect of Variation of Thermodynamical Parameters of Egr fluid on No Emissions in S I Engines [Volume 14, Issue 3, 2001, Pages 273-273]
  • Ajam, A. Content-based Image Retrieval Considering Colour Difference Histogram of Image Texture and Edge Orientation [Volume 33, Issue 5, 2020, Pages 949-958]
  • Ajam, H. Sensitivity Analysis of Parameter Hanges in Nonlinear Hydraulic Control Systems (RESEARCH NOTE) [Volume 18, Issue 3, 2005, Pages 239-252]
  • AJAY, KETAN Performance Evaluation of Nanofluid (Al2O3/H2O-C2H6O2) Based Parabolic Solar Collector Using Both Experimental and CFD Techniques [Volume 29, Issue 4, 2016, Pages 572-580]
  • A. Jeddi, A. A. The Influence of Machine Parameters on the Properties of Double Jersey Knitted Fabrics [Volume 8, Issue 1, 1995, Pages 37-48]
  • A. Jeddi, A. A. Studies Into the Omission of Take-Down Tension System in Circular Kniting Machanes (TECHNICAL NOTE) [Volume 9, Issue 4, 1996, Pages 231-233]
  • A. Jeddi, A. A. a Comparative Theoretical Analysis for a Knitted Loop Model [Volume 12, Issue 1, 1999, Pages 39-44]
  • A. Jeddi, A. A. The Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine [Volume 15, Issue 3, 2002, Pages 311-318]
  • Ajemba, Regina Nitric Acid-activated Nteje Clay: Structural and Bleaching Properties (RESEARCH NOTE) [Volume 26, Issue 5, 2013, Pages 495-500]
  • Ajemba, Regina Adsorption of Malachite Green from Aqueous Solution using Activated Ntezi Clay: Optimization, Isotherm and Kinetic Studies [Volume 27, Issue 6, 2014, Pages 839-854]
  • Akbar, F. R. Effect of Wire Pitch on Capacity of Single Staggered Wire and Tube Heat Exchanger Using Computational Fluid Dynamic Simulation [Volume 33, Issue 8, 2020, Pages 1637-1642]
  • Akbar Ghafouri Rokn Abadi, Ali Constrained Model Predictive Control of Low-power Industrial Gas Turbine [Volume 30, Issue 2, 2017, Pages 207-214]
  • Akbari, G. H. Investigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying [Volume 33, Issue 9, 2020, Pages 1759-1765]
  • Akbari, G. H. Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
  • Akbari, Gholamhosein Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering [Volume 30, Issue 2, 2017, Pages 288-293]
  • Akbari, Gholam Hossein Comparison of Mechanical Behavior and Microstructure of Continuous Cast and Hot Worked CuZn40Al1 Alloy (TECHNICAL NOTE) [Volume 20, Issue 3, 2007, Pages 249-256]
  • Akbari, Jalal Evaluation of Ultimate Torsional Strength of Reinforcement Concrete Beams Using Finite Element Analysis and Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 501-508]
  • Akbari, M. Single-vehicle Run-off-road Crash Prediction Model Associated with Pavement Characteristics [Volume 33, Issue 7, 2020, Pages 1375-1386]
  • Akbari, Mehdi An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
  • Akbari Alashti, Reza Large Deflection Analysis of Compliant Beams of Variable Thickness and Non-Homogenous Material under Combined Load and Multiple Boundary Conditions [Volume 25, Issue 4, 2012, Pages 353-362]
  • Akbari Foroud, Asghar Discrimination of Power Quality Distorted Signals Based on Time-frequency Analysis and Probabilistic Neural Network [Volume 27, Issue 6, 2014, Pages 881-888]
  • Akbari-Kasgari, M. A Closed-loop Supply Chain Network Design Problem in Copper Industry [Volume 33, Issue 10, 2020, Pages 2008-2015]
  • Akbarnezhad, S Eulerian Lagrangian Simulation of Particle Capture and Dendrite Formation on Binary Fibers [Volume 31, Issue 7, 2018, Pages 1004-1011]
  • Akbarpour, Hosna Discrete Multi Objective Particle Swarm Optimization Algorithm for FPGA Placement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 410-418]
  • Akbarpour, N. New Approaches in Meta-heuristics to Schedule Purposeful Inspections of Workshops in Manufacturing Supply Chains [Volume 33, Issue 5, 2020, Pages 833-840]
  • AkbarpourShirazi, Mohsen An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
  • Akbarzade, S. Experimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid [Volume 27, Issue 2, 2014, Pages 333-340]
  • Akbarzadeh, F. A Modfied Self-organizing Map Neural Network to Recognize Multi-font Printed Persian Numerals (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1700-1706]
  • Akbarzadeh, H. Investigation of Melting by Molecular Dynamics Simulation [Volume 8, Issue 2, 1995, Pages 85-94]
  • Akbarzadeh, M A Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings [Volume 31, Issue 5, 2018, Pages 792-798]
  • Akbarzadeh, Z. A Hybrid Fuzzy Multi-criteria Decision Making Model Based on Fuzzy DEMATEL with Fuzzy Analytical Network Process and Interpretative Structural Model for Prioritizing LARG Supply Chain Practices [Volume 32, Issue 3, 2019, Pages 413-423]
  • Akbarzadeh-T, M. R. Cooperative Co-Evolving Neural Networks for Robosoccer Simulation [Volume 18, Issue 2, 2005, Pages 207-218]
  • Akgerman, A Dispersion Coefficients of Supercritical Fluid in Fixed Beds [Volume 13, Issue 1, 2000, Pages 1-14]
  • Akhair, S. H. M Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
  • Akhavan, Azam An Experimental Study of the Steel Cylinder Quenching in Water-based Nanofluids [Volume 33, Issue 1, 2020, Pages 28-33]
  • Akhavan, B. Micro-structural Deformation Field Analysis of Aluminum Foam using Finite Element Method and Digital Image Correlation [Volume 33, Issue 10, 2020, Pages 2065-2078]
  • Akhavan, M. Quenching Effect on the Pb-Substituted Bi-Based Bulk Ceramic Superconductors [Volume 11, Issue 1, 1998, Pages 21-28]
  • Akhavan, R. The Effects of Potassium Promoter on the Syngas Conversion of Cobalt Catalysts (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 285-293]
  • Akhavan Behabadi, M.A. Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube [Volume 27, Issue 2, 2014, Pages 341-348]
  • Akhbari Varkani, Mohsen A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
  • Akhlaghi, Mohammad Mahdi Energy and Exergy Analysis of Air PV/T Collector of Forced Convection with and without Glass Cover [Volume 26, Issue 8, 2013, Pages 913-926]
  • Akhlaghi, Neda Hemp Fibres as Novel Green Support Material for Immobilization of Acidithiobacillus ferrooxidans [Volume 32, Issue 9, 2019, Pages 1225-1230]
  • Akhlaghian, Faranak Fe/TiO2 Catalyst for Photodegradation of Phenol in Water [Volume 28, Issue 4, 2015, Pages 499-506]
  • Akhlaghi Modiri, F. Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
  • Akhondi, E. Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
  • Akhondizadeh, M. Experimental Determination of the Optimum Ball Impacts for Solution of Silo Obstruction (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1215-1222]
  • Akhondizadeh, M. Hopper Wall Simulation in ANSYS to Determine Displacement Due to Single Ball Impact [Volume 32, Issue 1, 2019, Pages 171-176]
  • Akhondizadeh, Mehdi Dynamic Analysis of A Three-Rotor Flexible Coupling with Angular Misalignment [Volume 24, Issue 2, 2011, Pages 155-164]
  • Akhondizadeh, Mehdi A New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 593-598]
  • Akhondizadeh, Mehdi Effect of Material Wet on Silo Obstruction Solution by Impact (TECHNICAL NOTE) [Volume 29, Issue 11, 2016, Pages 1628-1634]
  • Akhoondian, Behnam Laminar Flame Speed Prediction in Lean Mixture of Aluminum Dust Clouds by Considering the Effect of Random Distribution of Particles in Two-dimension [Volume 29, Issue 2, 2016, Pages 246-254]
  • Akhtari, Ali Akbar Flow Variables Prediction Using Experimental, Computational Fluid Dynamic and Artificial Neural Network Models in a Sharp Bend [Volume 29, Issue 1, 2016, Pages 14-22]
  • Akhtarpour, A. Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
  • Akram, Muhammad Analysis of Packet Loss and Latency Control for Robust IPTV over Mobile WiMAX and LTE Assessment (RESEARCH NOTE) [Volume 26, Issue 3, 2013, Pages 229-240]
  • Alaeddini, Adel EFFECT OF LOCATION OF EXPLANATORY VARIABLE ON MONITORING POLYNOMIAL QUALITY PROFILES [Volume 25, Issue 2, 2012, Pages 131-140]
  • Alaei, Reza Selecting Efficient Service-providers in Electric Power Distribution Industry Using Combinatorial Reverse Auction [Volume 30, Issue 9, 2017, Pages 1342-1351]
  • Alaei, Saeed Designing of Supply Chain Coordination Mechanism with Leadership Considering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1888-1896]
  • Alagappan, N. Performance Investigation of 405 Stainless Steel Thermosyphon using Cerium (IV) Oxide Nano Fluid [Volume 30, Issue 4, 2017, Pages 575-581]
  • Alam, M. Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
  • Alam, Md. Analysis of Magneto-hydrodynamics Jeffery-Hamel Flow with Nanoparticles by Hermite-Padé Approximation [Volume 28, Issue 4, 2015, Pages 599-607]
  • ALAM, AFTAB Hydromagnetic Instability of Stratified Rivlin-Ericksen Fluid in Porous Medium in the Presence of Suspended Particles [Volume 22, Issue 3, 2009, Pages 287-294]
  • Alamatian, javad A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads [Volume 24, Issue 4, 2011, Pages 341-350]
  • Alamdar, H. Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
  • Alamdar Yazdi, A. Evaluation of the Shearing Properties of Woven Fabrics: Rated Force [Volume 15, Issue 4, 2002, Pages 406-416]
  • Alamdar Yazdi, A. Effective Features of the Concentrated Loading Curves (Woven Fabric Objective Measurement) [Volume 16, Issue 2, 2003, Pages 197-208]
  • Alamdar Yazdi, A. Shearing Properties of the Skewed Woven Fabrics (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 177-185]
  • Al-Ameri, A. F. I. Vertical and Lateral Displacement Response of Foundation to Earthquake Loading [Volume 33, Issue 10, 2020, Pages 1864-1871]
  • Alamian, R. Experimental Assessment of a Fixed On-Shore Oscillating Water Column Device: Case Study on Oman Sea [Volume 33, Issue 3, 2020, Pages 494-504]
  • Alamian, R. Numerical Simulation of Hydrodynamic Properties of Alex Type Gliders [Volume 33, Issue 7, 2020, Pages 1387-1396]
  • Alamian, Rezvan Experimental Evaluation of IRWEC1, a Novel Offshore Wave Energy Converter [Volume 29, Issue 9, 2016, Pages 1292-1299]
  • Alan, M P.N Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
  • Al-Ani, M. S. Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
  • Alasty, Aria Trajectory Tracking of a Mobile Robot Using Fuzzy Logic Tuned by Genetic Algorithm (TECHNICAL NOTE) [Volume 19, Issue 1, 2006, Pages 95-104]
  • Alasvand Zarasvand, K. Investigating the Effects of Cold Bulge Forming Speed on Thickness Variation and Mechanical Properties of Aluminum Alloys: Experimental and Numerical [Volume 31, Issue 9, 2018, Pages 1602-1608]
  • Alavi, A. Stiffness-based Approach for Preliminary Design of Framed Tube Structures [Volume 30, Issue 11, 2017, Pages 1664-1672]
  • Alavi, Erfan Non-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls [Volume 22, Issue 4, 2009, Pages 343-356]
  • Alavi, Mohammad Speed Detection in Wind-Tunnels by processing Schlieren Images (RESEARCH NOTE) [Volume 29, Issue 7, 2016, Pages 962-967]
  • Alavi Fazel, S. A. Pool Boiling Heat Transfer in Water/Amines Solutions [Volume 21, Issue 2, 2008, Pages 113-131]
  • Alavi Gharahbagh, A Improved Content Aware Image Retargeting Using Strip Partitioning [Volume 31, Issue 5, 2018, Pages 684-692]
  • Al-Bugharbee, H. An Experimental Investigation of Enclosure’s Effect on Noise Reduction in Portable Generators (Technical Note) [Volume 33, Issue 2, 2020, Pages 350-356]
  • Al-Dabbagh Hossein, M. A Novel Fuzzy and Artificial Neural Network Representation of Overcurrent Relay Characteristics [Volume 16, Issue 3, 2003, Pages 233-246]
  • Al-dujaili, M. A. Ahmed Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
  • Ale Ahmad, A The Influence of DC-Link Voltage on Commutation Torque Ripple of Brushless DC Motors with Two-Segment Pulse-width Modulation Control Method [Volume 31, Issue 2, 2018, Pages 307-314]
  • Ale Ahmad, A. A New Variable Frequency Zero Voltage Switching Control Method for Boost Converter Operating in Boundary Conduction Mode [Volume 33, Issue 11, 2020, Pages 2222-2232]
  • Ale Ebrahim, H. a New Approximate Solution Technique (Quantized Method) for Simultaneous Gas Solid Reactions [Volume 9, Issue 4, 1996, Pages 181-188]
  • Alemi-Rostami, M. Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
  • Alemzad, H. Quality Improvement Through Multiple Response Optimization (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 49-58]
  • Alemzadeh, I Conjugated Linoleic Acid Production and Optimization Via Catalytic Reaction Method Using Safflower Oil [Volume 31, Issue 8, 2018, Pages 1166-1171]
  • Alemzadeh, Iran Sucrose Inversion by Saccharomyces Yeast Cells Immobilized on to Corn Grits [Volume 2, Issue 3, 1989, Pages 84-87]
  • Alemzadeh, Iran Treatment of Dairy Wastewater Using Pilot Scale Tricking Filter [Volume 5, Issue 3, 1992, Pages 77-80]
  • Alemzadeh, Iran The Mechanism of Chromium Biosorption by Saccharomyces Cerevisiae [Volume 10, Issue 3, 1997, Pages 121-126]
  • Alemzadeh, Iran Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]
  • Alemzadeh, Iran Bioremediation of Sediment in Persian Gulf Coast (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 1-8]
  • Alemzadeh, Iran Some Investigation on Bioremediation of Sediment in Persian Gulf Coast (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 45-53]
  • Alemzadeh, Iran Optimization of HFDS Production from Date Syrup (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 127-134]
  • Alemzadeh, Iran A Study on Plant Polymer: Pectin Production and Modification (RESEARCH NOTE) [Volume 23, Issue 2, 2010, Pages 107-114]
  • Alemzadeh, Iran Xylanase Production under Solid State Fermentation by Aspergillus niger [Volume 24, Issue 3, 2011, Pages 197-208]
  • Alemzadeh, Iran Optimization of Lipase Immobilization [Volume 25, Issue 1, 2012, Pages 1-10]
  • Alemzadeh, Iran Encapsulation of Peppermint Oil with Arabic Gum-gelatin by Complex Coacervation Method [Volume 26, Issue 8, 2013, Pages 807-814]
  • Alemzadeh, Iran Influence of Glycerol and Clay Contents on Biodegradability of Corn Starch Nanocomposites [Volume 27, Issue 2, 2014, Pages 203-214]
  • Alemzadeh, Iran Lipase Catalyzed Incorporation of Conjugated Linoleic Acid by Transesterification into Sunflower Oil Applying Immobilized Lipase (Lipozyme Thermomyces lanuginosus and Rhizomucor mehei) [Volume 29, Issue 4, 2016, Pages 436-443]
  • Alemzadeh, Iran Acrylamide Reduction in Potato Crisps using: Asparaginase from Candida utilis, Commercial Asparaginase, Salt Immersion, and pH Treatment [Volume 29, Issue 7, 2016, Pages 879-886]
  • Alemzadeh, Iran Encapsulation of Food Components and Bioactive Ingredients and Targeted Release [Volume 33, Issue 1, 2020, Pages 1-11]
  • Alfatlawi, T. J.M. Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
  • Alferjani, Marwan Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips [Volume 28, Issue 5, 2015, Pages 671-676]
  • Alfi, Alireza Constrained Nonlinear Optimal Control via a Hybrid BA-SD [Volume 25, Issue 3, 2012, Pages 197-204]
  • Al-Gharrawi, A. M. B. Collapse Problem Treatment of Gypseous Soil by Nanomaterials [Volume 33, Issue 9, 2020, Pages 1737-1742]
  • Algie, S.H. Solidification in Copper Continuously Cast in Graphite Moulds [Volume 2, Issue 3, 1989, Pages 132-143]
  • Al-Haidari, H. S. Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
  • Al Hassan, Md. Rahat Synthesis and Characterization of Porcelain Body Developed from Rice Husk Ash (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 25-31]
  • Alhassani, A. M.J. Analysis of Under-Reamed Piles Subjected to Different Types of Load in Clayey Soil [Volume 34, Issue 8, 2021, Pages 1940-1948]
  • Alhassani, M. H Esterification Reaction Kinetics Using Ion Exchange Resin Catalyst by Pseudo-Homogenous and Eley-Ridel Models [Volume 31, Issue 8, 2018, Pages 1172-1179]
  • Al-Haydari, I. S. Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
  • Al Hazza, M. H. F Developing of Corrosion Resistance Nano Copper Oxide Coating on Copper using Anodization in Oxalate solution [Volume 31, Issue 3, 2018, Pages 450-455]
  • Al-Hydary, I. A. Disher Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
  • Ali, Ammar Yasier Structural Behavior of Reinforced Concrete Horizontally Curved Box Beam with Opening [(Articles in Press)]
  • Ali, D. H. Numerical Analysis of Stress Distribution During Tunneling in Clay Stone Rock [Volume 33, Issue 8, 2020, Pages 1472-1478]
  • Ali, I. Effect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile [Volume 21, Issue 3, 2008, Pages 291-302]
  • Ali, I. An Experimental Investigation of Diesel Engines Fuel Injection Pressure Effect on Power Performance and Fuel Consumption [Volume 22, Issue 1, 2009, Pages 91-97]
  • Ali, I. F. Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
  • Ali, I. F. Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
  • Ali, M. A. T. Mean Velocity and Static Pressure in a Sharp-edge Circular Nozzle Jet [Volume 12, Issue 2, 1999, Pages 87-98]
  • Ali, R Biodiesel Production via Transesterification of Low Grade Cooking Oil over Heterostructure Nano Particles of Ni/Mg/Al2O3 Catalyst [Volume 31, Issue 8, 2018, Pages 1318-1325]
  • Aliabadian, A. Optimal Singular Value Decomposition Based Pre-coding for Secret Key Extraction from Correlated Orthogonal Frequency Division Multiplexing Sub-channels [Volume 33, Issue 7, 2020, Pages 1214-1222]
  • Aliakbari, K The Analysis of Wheel Loader Diesel Engine Crankshaft Failure [Volume 31, Issue 3, 2018, Pages 473-479]
  • Aliakbarian, H. Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
  • Ali Akbarian, H. Design and Fabrication of a Microwave Weed Killer Device for Weed Control Applications [Volume 32, Issue 7, 2019, Pages 947-953]
  • Aliakbari Nouri, F. Providing a Fuzzy Expert System to Assess the Maturity Level of Companies in Manufacturing Excellence in the Food Industry of Iran [Volume 30, Issue 4, 2017, Pages 532-542]
  • Alibakhshi, Reza The Effect of Anisotropy on Free Vibration of Rectangular Composite Plates with Patch Mass [Volume 25, Issue 3, 2012, Pages 223-232]
  • Alibeigi, M. Effect of Porous Medium Positioning on Heat Transfer of Micro-channel with Jet [Volume 33, Issue 10, 2020, Pages 2057-2064]
  • Alibeigi, S. Preparation of Cobalt Oxide/Zinc Oxide Nanocomposite [Volume 23, Issue 2, 2010, Pages 133-138]
  • Alielahi, H. An Investigation of the Seismic Interaction of Surface Foundations and Underground Cavities Using Finite Element Method [Volume 33, Issue 9, 2020, Pages 1721-1730]
  • Ali Goodarz, Mohammad Reza Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
  • Alihosseini, A. Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
  • Alijani, Hossein Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process [Volume 28, Issue 8, 2015, Pages 1209-1218]
  • Alijani, Hossein Evaluation of Ductile Damage Criteria in Hot Forming Processes [Volume 29, Issue 10, 2016, Pages 1441-1449]
  • Alijani, Mohammad G. H. Development a New Technique Based on Least Square Method to Synthesize the Pattern of Equally Space Linear Arrays [Volume 32, Issue 11, 2019, Pages 1620-1626]
  • Alikhani, H. In-depth Investigation of Project Planning and Control Software Package Application in the Construction Industry of Iran [Volume 33, Issue 10, 2020, Pages 1817-1825]
  • Alim, Md. Abdul Performance of SST k-ω Turbulence Model for Computation of Viscous Drag of Axisymmetric Underwater Bodies [Volume 24, Issue 2, 2011, Pages 139-146]
  • Alimirzaloo, V. Investigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process [Volume 33, Issue 2, 2020, Pages 344-349]
  • Alimirzaloo, Vali Minimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method [Volume 29, Issue 2, 2016, Pages 264-273]
  • Alimirzaloo, Vali Experimental Investigation of the Effect of Process Parameters on the Surface Roughness in Finishing Process of Chrome Coated Printing Cylinders (TECHNICAL NOTE) [Volume 29, Issue 12, 2016, Pages 1775-1782]
  • Alimirzaloo, Vali Investigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050 [Volume 30, Issue 6, 2017, Pages 920-925]
  • Alimohammadi, Mahdiyeh Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
  • Alimohammadi ardekani, MAjid A Robust Two-stage Data Envelopment Analysis Model for Measuring Efficiency: Considering Iranian Electricity Power Production and Distribution Processes [Volume 29, Issue 5, 2016, Pages 646-653]
  • Alinaghian, M. A Green Competitive Vehicle Routing Problem under Uncertainty Solved by an Improved Differential Evolution Algorithm [Volume 32, Issue 7, 2019, Pages 976-981]
  • Alinaghian, Mehdi Introducing the Time Value of Money in a Non-consignment Vendor Managed Inventory Model [Volume 29, Issue 5, 2016, Pages 637-645]
  • Alinejad, K. Treatability Evaluation of Municipal Wastewater and Anaerobically-Treated Industrial Effluent in a Rotating Biological Contactor [Volume 16, Issue 2, 2003, Pages 143-154]
  • Alinejad-Beromi, Y Optimal Locating and Sizing of Unified Power Quality Conditioner- phase Angle Control for Reactive Power Compensation in Radial Distribution Network with Wind Generation [Volume 31, Issue 2, 2018, Pages 299-306]
  • Alipour, A. Dynamic Analysis of Moving Cables with Variable Tension and Variable Speed [Volume 23, Issue 2, 2010, Pages 157-168]
  • Alipour, F. Steady Flow Through Modeled Glottal Constriction [Volume 7, Issue 1, 1994, Pages 13-18]
  • Alipour, M. Integrated Order Batching and Distribution Scheduling in a Single-block Order Picking Warehouse Considering S-Shape Routing Policy [Volume 31, Issue 10, 2018, Pages 1723-1733]
  • Alisjahbana, S. W. Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
  • Ali Torabi, S. A possibilistic bi-objective model for a competitive supply chain network design under variable coverage [Volume 31, Issue 9, 2018, Pages 1575-1584]
  • Alizadeh, B. AIOSC: Analytical Integer Word-length Optimization Based on System Characteristics for Recursive Fixed-Point Linear Time Invariant Systems [Volume 33, Issue 7, 2020, Pages 1223-1230]
  • Alizadeh, B. Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
  • Alizadeh, Masoud PHASE STABILITY AND CONDUCTIVITY OF δ-Bi2O3 WITH MIXTURE OF YTTRIUM AND YTTERBIUM OXIDES [Volume 25, Issue 2, 2012, Pages 159-164]
  • Alizadeh, Masoud Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
  • Alizadeh, Mehdi Improvement of the Solvent Extraction of Rhenium from Molybdenite Roasting Dust Leaching Solution using Counter-current Extraction by a Mixer-settler Extractor (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 651-658]
  • Alizadeh, Yoness EXPERIMENTAL EVALUATION OF BLAST WAVE PARAMETERS IN UNDERWATER EXPLOSION OF HEXOGEN CHARGES [Volume 25, Issue 1, 2012, Pages 65-72]
  • AlizadehKharazi, B. A Novel Building Information Modeling-based Method for Improving Cost and Energy Performance of the Building Envelope [Volume 33, Issue 11, 2020, Pages 2162-2173]
  • Alizadeh Kharkeshi, B. Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
  • Al-Jaberi, Z. Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
  • Aljazaeri, Z. R. Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
  • Al-Jendeel, H. A Esterification Reaction Kinetics Using Ion Exchange Resin Catalyst by Pseudo-Homogenous and Eley-Ridel Models [Volume 31, Issue 8, 2018, Pages 1172-1179]
  • Al-Jubouri, S. M Esterification Reaction Kinetics Using Ion Exchange Resin Catalyst by Pseudo-Homogenous and Eley-Ridel Models [Volume 31, Issue 8, 2018, Pages 1172-1179]
  • Alkarkhi, A. F. M Proposed Procedure for Estimating the Coefficient of Three-factor Interaction for 2^p 3^m 4^q Factorial Experiments (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 12-18]
  • Alkarkhi, A. F. M. Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure? [Volume 28, Issue 11, 2015, Pages 1644-1650]
  • Alkasir Farhani, M. Experimental Investigation of Sinusoidal Tube in Triplex-Tube Heat Exchanger during Charging and Discharging Processes Using Phase Change Materials [Volume 32, Issue 7, 2019, Pages 999-1009]
  • Al-Khafaji, Z. Effect of Opening Holes on the Hydraulic Performance for Crump Weir [Volume 31, Issue 12, 2018, Pages 2022-2027]
  • Allaedini, Ghazaleh Hydrodynamic Studies of Fluidized Bed Chemical Vapor Deposition Reactors to Produce Carbon Nano Tubes via Catalytic Decomposition over Co/Pd MgO [Volume 28, Issue 12, 2015, Pages 1693-1701]
  • Allahkaram, S. R. Causes of Catastrophic Failure of High Mn Steel Utilized as Crusher Overlaying Shields (TECHNICAL NOTE) [Volume 21, Issue 1, 2008, Pages 55-64]
  • Allahyari, E Vibration Behavior of Nanocomposite Plate Reinforced by Pristine and Defective Graphene Sheets; an Analytical Approach [Volume 31, Issue 7, 2018, Pages 1095-1102]
  • Almabouada, F. Experimental Study of a Flash-lamp Pumped Passively Q-Switched Nd:YAG Laser Using Cr4+:YAG Saturable Absorber [Volume 31, Issue 11, 2018, Pages 1870-1875]
  • Almasi, Ali Decolorization of Methylene Blue from Aqueous Solution Using Ultrasonic / Fenton Like Process (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1582-1586]
  • Al Mesfer, M. Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
  • Al-Mozini, Abdullah Modeling of Riyadh Sewage Treatment Plant: 1-Model Development, Verification and Simulation [Volume 22, Issue 3, 2009, Pages 211-220]
  • Al-Mutairee, Hayder M.K. Effect of Using Waste Rubber as Partial Replacement of Coarse Aggregate on The Torsional Strength of Square Reinforced Concrete Beam [(Articles in Press)]
  • Al-Mutaz, Ibrahim Modeling of Riyadh Sewage Treatment Plant: 1-Model Development, Verification and Simulation [Volume 22, Issue 3, 2009, Pages 211-220]
  • AL-Naely, H. Effect of Opening Holes on the Hydraulic Performance for Crump Weir [Volume 31, Issue 12, 2018, Pages 2022-2027]
  • Al-Neami, M. A. Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
  • Al-Obaedi, Jalal Simulating the Effect of Speed Humps on the U-Turn Traffic [Volume 32, Issue 12, 2019, Pages 1773-1780]
  • Al-Obaedi, J. T. S. Close Following Behavior: Estimation of Desired Gap Headway Using Loop Detector Data (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 661-666]
  • Al-Obaedi, J. T. S. The Effect of Speed Humps on Highways Pavement Condition [Volume 33, Issue 5, 2020, Pages 737-743]
  • Alqaraghuli, W. A. A Proposed Procedure for Estimating the Coefficient of Three-factor Interaction for 2^p 3^m 4^q Factorial Experiments (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 12-18]
  • Alqaraghuli, W. A. A. Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure? [Volume 28, Issue 11, 2015, Pages 1644-1650]
  • Al-Robaian, A. R. A. On Numerical Investigation of Semi-empirical Relations Representing Local Nusselt Number at Lower Nozzle-target Spacing’s [Volume 32, Issue 1, 2019, Pages 137-145]
  • Al-Salihy, Z. A. Z. The Effect of Speed Humps on Highways Pavement Condition [Volume 33, Issue 5, 2020, Pages 737-743]
  • Alsharifi, Z. Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
  • Al-Sultani, S. A. J. Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
  • Alvanchi, A. In-depth Investigation of Project Planning and Control Software Package Application in the Construction Industry of Iran [Volume 33, Issue 10, 2020, Pages 1817-1825]
  • Alvanchi, A. A Novel Building Information Modeling-based Method for Improving Cost and Energy Performance of the Building Envelope [Volume 33, Issue 11, 2020, Pages 2162-2173]
  • Alvanchi, A. Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
  • Alvandi, R. A Time-Domain Method for Shape Reconstruction of a Target with Known Electrical Properties (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 43-48]
  • Alwash, N. A. Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
  • AlyanNezhadi, M. M. A New High Frequency Grid Impedance Estimation Technique for the Frequency Range of 2 to150 kHz [Volume 31, Issue 10, 2018, Pages 1666-1674]
  • AlyanNezhadi, M. M. Content-based Image Retrieval Considering Colour Difference Histogram of Image Texture and Edge Orientation [Volume 33, Issue 5, 2020, Pages 949-958]
  • AlyanNezhadi, M. M. Gait Recognition based on Measurements of Moving Human Legs Angles [Volume 33, Issue 5, 2020, Pages 975-983]
  • AlyanNezhadi, M. M. A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
  • Amal, M. I Characterization and Utilization of Zeolite for NPK Slow Release Fertilizer (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 622-628]
  • Amani, H. Experimental Investigations on Behaviour of Rhamnolipid Biosurfactant as a Green Stabilizer for the Biological Synthesis of Gold Nanoparticles [Volume 33, Issue 6, 2020, Pages 1054-1060]
  • Amani, T. Treatment of Wastewater Containing Carbohydrates using Pichia Saitoi Culture [Volume 17, Issue 3, 2004, Pages 209-218]
  • Amani Dashlejeh, A. Effects of Radial Imperfection on the Load Capacity of Round HSS Columns [Volume 32, Issue 1, 2019, Pages 36-45]
  • Amanifard, Nima A Composite Finite Difference Scheme for Subsonic Transonic Flows (RESEARCH NOTE). [Volume 10, Issue 1, 1997, Pages 37-44]
  • Amanifard, Nima Numerical Investigation on Compressible Flow Characteristics in Axial Compressors Using a Multi Block Finite Volume Scheme [Volume 15, Issue 1, 2002, Pages 91-104]
  • Amanifard, Nima A 2-D Numerical Investigation on the Modal Characteristics of Rotating-Stall with a Variable-Cascade- Length Approach in an Axial Compressor [Volume 16, Issue 1, 2003, Pages 81-90]
  • Amanifard, Nima A Numerical Investigation on the Unstable Flow in a Single Stage of an Axial Compressor [Volume 16, Issue 2, 2003, Pages 171-182]
  • Amanifard, Nima Stall Vortex Shedding over a Compressor Cascade (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 9-16]
  • Amanifard, Nima Stall Vortex Shedding Over a Compressor Cascade (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 29-36]
  • Amanifard, Nima Presenting a Modified SPH Algorithm for Numerical Studies of Fluid-Structure Interaction Problems [Volume 20, Issue 2, 2007, Pages 167-178]
  • Amanifard, Nima Modeling and Multi-Objective Optimization of Stall Control on NACA0015 Airfoil with a Synthetic Jet using GMDH Type Neural Networks and Genetic Algorithms [Volume 22, Issue 1, 2009, Pages 69-88]
  • Amanifard, Nima A High-Velocity Impact Simulation using SPH-Projection Method [Volume 22, Issue 4, 2009, Pages 359-368]
  • Amanifard, Nima A MODIFIED COMPRESSIBLE SMOOTHED PARTICLE HYDRODYNAMICS (MCSPH) METHOD AND ITS APPLICATION ON THE NUMERICAL SIMULATION OF LOW AND HIGH VELOCITY IMPACTS [Volume 25, Issue 1, 2012, Pages 45-58]
  • Amanifard, Nima Simulation of Gravity Wave Propagation in Free Surface Flows by an Incompressible SPH Algorithm [Volume 25, Issue 3, 2012, Pages 239-248]
  • Amanifard, Nima Using Neural Networks and Genetic Algorithms for Modelling and Multi-objective Optimal Heat Exchange through a Tube Bank [Volume 25, Issue 4, 2012, Pages 321-326]
  • Amanifard, Nima Numerical Simulation of Squeezed Flow of a Viscoplastic Material by a Three-step Smoothed Particle Hydrodynamics Method [Volume 26, Issue 4, 2013, Pages 341-350]
  • Amanifard, Nima Simulation of Cold Rolling Process Using Smoothed Particle Hydrodynamics (SPH) [Volume 26, Issue 5, 2013, Pages 515-522]
  • Amanifard, Nima Flow Re-Stabilizing Observation via Air Injection during the Rotating Stall through a Single-stage Axial Compressor by a 2-D Finite-volume Approach [Volume 26, Issue 7, 2013, Pages 761-770]
  • Amanifard, Nima Numerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel [Volume 26, Issue 7, 2013, Pages 771-780]
  • Ameri, M. A. Control of Engineering Properties of Asphalt Concrete Based on Permanent Deformation Constraint of Subgrade at Tropical Zones in Iran (TECHNICAL NOTE) [Volume 14, Issue 3, 2001, Pages 195-200]
  • Ameri, Maede Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
  • Ameri, Mehran Effects of Directional Subdividing on adaptive Grid-Embedding (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 71-78]
  • AMGHAR, Mustapha Risk Analysis of Operating Room Using the Fuzzy Bayesian Network Model [Volume 30, Issue 1, 2017, Pages 66-74]
  • Amidpour, M. Various Approaches to Thermodynamic Optimization of a Hybrid Multi-effect Evaporation with Thermal Vapour Compression and Reverse Osmosis Desalination System Integrated to a Gas Turbine Power Plant [Volume 32, Issue 5, 2019, Pages 777-789]
  • Amin, Mohammad Hassan Hydrothermal Synthesis of Aligned Hydroxyapatite Nanorods with Ultra-High Crystallinity [Volume 21, Issue 2, 2008, Pages 109-116]
  • Aminayi, Payam Hydrodynamic Studies of Fluidized Bed Chemical Vapor Deposition Reactors to Produce Carbon Nano Tubes via Catalytic Decomposition over Co/Pd MgO [Volume 28, Issue 12, 2015, Pages 1693-1701]
  • Amine, A Comparison of Inventory Models for Optimal Working Capital; Case of Aeronautics Company [Volume 31, Issue 4, 2018, Pages 605-611]
  • Aminfar, Mohammad Hosein Experimental and Numerical Modeling of the Effect of Groundwater Table Lowering on Bearing Capacity of Shallow Square Footings [Volume 32, Issue 10, 2019, Pages 1429-1436]
  • Amini, A. Predicting the Empirical Distribution of Video Quality Scores Using Recurrent Neural Networks [Volume 33, Issue 5, 2020, Pages 984-991]
  • Amini, B. The Influence of Urban Network Features on the Quality of Traffic Service (RESEARCH NOTE) [Volume 11, Issue 3, 1998, Pages 167-174]
  • Amini, Behnaz The Effect of Normal Anisotropy on Thin-Walled Tube Bending [Volume 26, Issue 1, 2013, Pages 83-90]
  • Amini, J. Kohonen Self Organizing for Automatic Identification of Cartographic Objects [Volume 15, Issue 2, 2002, Pages 109-116]
  • Amini, M. Numerical and Experimental Investigation of Motor Pressure Effect on Thermochemical Erosion of Graphite Nozzle in Solid Fuel Engines [Volume 32, Issue 11, 2019, Pages 1656-1664]
  • Amini, Malihe Phosphorus Removal from Dairy Wastewater in Batch Systems under Simultaneous Aerobic/Anaerobic Conditions: Application of Response Surface Methodology [Volume 28, Issue 6, 2015, Pages 855-863]
  • Amini, Morteza Failure Probability and Remaining Life Assessment of Reheater Tubes [Volume 26, Issue 5, 2013, Pages 543-552]
  • Amini, S. Mohammad Molecular Dynamics Simulation of Potassium Chloride Melting(.I. Microcrystal Simulation and Sample Size Effect) [Volume 2, Issue 1, 1989, Pages 5-13]
  • Amini, S. Mohammad Molecular Dynamics Simulation of Potassium Chloride Melting (II. Constant Volume and Constant Pressure Simulation of Filled System) [Volume 2, Issue 1, 1989, Pages 15-24]
  • Amini, S. Mohammad Investigation of Melting by Molecular Dynamics Simulation [Volume 8, Issue 2, 1995, Pages 85-94]
  • Aminian Modarres, A. Investigating The Effects of Modem Electromagnetic Waves (2.4 GHz) on Electroencephalogram [Volume 32, Issue 8, 2019, Pages 1155-1162]
  • Aminian-Modarres, Amir A Blind Hammerstein Diversity Combining Technique for Flat Fading Channels [Volume 26, Issue 3, 2013, Pages 277-288]
  • Amini Mashhadi, Hossein Effect of Composition and MnS Addition on Microstructure and Mechanical Properties of Powder Forged Copper Steel Parts [Volume 17, Issue 1, 2004, Pages 81-94]
  • Amin Jarrahi, M. Scheduling Nurse Shifts Using Goal Programming Based on Nurse Preferences: A Case Study in an Emergency Department [Volume 32, Issue 7, 2019, Pages 954-963]
  • Aminmahalati, A. Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
  • Amin Naseri, M.R. Solving Re-entrant No-wait Flow Shop Scheduling Problem [Volume 28, Issue 6, 2015, Pages 903-912]
  • Amin Naseri, M.R. A Game Theoretic Approach for Sustainable Power Systems Planning in Transition [Volume 30, Issue 3, 2017, Pages 393-402]
  • Amin-Naseri, M. R. Coordination of Pricing and Order Quantity for Two Replaceable and Seasonal Products [Volume 33, Issue 3, 2020, Pages 439-447]
  • Aminnayeri, M. Change Point Estimation of the Stationary State in Auto Regressive Moving Average Models, Using Maximum Likelihood Estimation and Singular Value Decomposition-based Filtering [Volume 32, Issue 5, 2019, Pages 726-736]
  • Amin-Tahmasbi, H. Optimization of a Bi-objective Scheduling for Two Groups of Experienced and Inexperienced Distribution Staff Based on Capillary Marketing [Volume 31, Issue 11, 2018, Pages 1943-1952]
  • Aminy, M. Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
  • Amirabadi, H. Design of Broaching Tool Using Finite Element Method for Achieving the Lowest Residual Tensile Stress in Machining of Ti6Al4V Alloy [Volume 33, Issue 4, 2020, Pages 657-667]
  • Amirabedia, M. Experimental Comparison the Effect of Mn2O3 and Co3O4 Nano Additives on the Performance and Emission of SI Gasoline Fueled with Mixture of Ethanol and Gasoline [Volume 32, Issue 5, 2019, Pages 769-776]
  • Amirahmadi, M. Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
  • Amirataee, Babak Assessment of Goodness of Fit Methods in Determining the Best Regional Probability Distribution of Rainfall Data [Volume 27, Issue 10, 2014, Pages 1537-1546]
  • AmirFazli, A. The lterative Nature of the Engineering Design Process: a Telescopic Revision Model (RESEARCH NOTE) [Volume 7, Issue 1, 1994, Pages 57-60]
  • Amiri, A Project Scheduling with Simultaneous Optimization, Time, Net Present Value, and Project Flexibility for Multimode Activities with Constrained Renewable Resources [Volume 31, Issue 5, 2018, Pages 780-791]
  • Amiri, A. The Effect of Measurement Errors on the Performance of Variable Sample Size and Sampling Interval Control Chart [Volume 30, Issue 7, 2017, Pages 995-1004]
  • Amiri, Ahad Vibration Analysis of Circular Magneto-Electro-Elastic Nano-plates Based on Eringen s Nonlocal Theory [Volume 28, Issue 12, 2015, Pages 1808-1817]
  • Amiri, Ahad Size-dependent Vibration and Instability of Magneto-electro-elastic Nano-scale Pipes Containing an Internal Flow with Slip Boundary Condition [Volume 29, Issue 7, 2016, Pages 995-1004]
  • Amiri, Amirhossein Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis [Volume 26, Issue 6, 2013, Pages 621-630]
  • Amiri, Amirhossein Process Capability Index for Logistic Regression Profile Based on Spmk Index [Volume 28, Issue 8, 2015, Pages 1186-1192]
  • Amiri, Amirhossein Simultaneous Monitoring of Multivariate Process Mean and Variability in the Presence of Measurement Error with Linearly Increasing Variance under Additive Covariate Model (RESEARCH NOTE) [Volume 29, Issue 4, 2016, Pages 514-523]
  • Amiri, Amirhossein A Self-starting Control Chart for Simultaneous Monitoring of Mean and Variance of Simple Linear Profiles [Volume 29, Issue 9, 2016, Pages 1263-1272]
  • Amiri, Amirhossein Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
  • Amiri, F. Instrumentation Readings versus Numerical Analysis of Taham Dam [Volume 32, Issue 1, 2019, Pages 28-35]
  • Amiri, I. Evaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE) [Volume 27, Issue 2, 2014, Pages 307-314]
  • Amiri, Maghsood Solving a Redundancy Allocation Problem by a Hybrid Multi-objective Imperialist Competitive Algorithm [Volume 26, Issue 9, 2013, Pages 1031-1042]
  • Amiri, Saeed Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
  • Amiri, Z. Content-based Image Retrieval Considering Colour Difference Histogram of Image Texture and Edge Orientation [Volume 33, Issue 5, 2020, Pages 949-958]
  • Amirian, Homa Multi-objective Differential Evolution for the Flow shop Scheduling Problem with a Modified Learning Effect [Volume 27, Issue 9, 2014, Pages 1395-1404]
  • Amiri-Aref, Mehdi A Facility Location Problem with Tchebychev Distance in the Presence of a Probabilistic Line Barrier [Volume 25, Issue 4, 2012, Pages 293-302]
  • Amirinejhad, M. K. Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 814-820]
  • Amiri Tokaldany, Ebrahim Estimation of Friction Coefficient in Sediment Contained Flow through Rockfill [Volume 26, Issue 2, 2013, Pages 187-196]
  • Amirshahi, S. H. Color Matching of Blends Prepared From Black and White Fibers by Neural Networks (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 105-108]
  • AmirShahkarami, A. Effects of Lateral Constraints and Geometrical Characteristics on Deformation Capacity of the Persian Historic Unreinforced Masonry Shear Walls under Uncertainty Conditions [Volume 33, Issue 11, 2020, Pages 2127-2136]
  • Amirshenava, S. Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
  • Amirsoleimani, Pegah Comparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock [Volume 32, Issue 11, 2019, Pages 1591-1609]
  • Amirthagadeswaran, K.S. Enhancing Wear Resistance of Squeeze Cast AC2A Aluminum Alloy [Volume 26, Issue 4, 2013, Pages 365-374]
  • Amiruddin, A Precast Concrete Column Beam Connection Using Dowels Due to Cyclic Load [Volume 35, Issue 1, 2022, Pages 102-111]
  • Amirzadeh, Z. Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
  • Amit Kumar, R Influence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading [Volume 31, Issue 1, 2018, Pages 104-109]
  • Amjadi, A. Acousto-Refrigerator with an Adjustable Mechanical Resonator (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 183-196]
  • Amoozad-Khalili, H. A Bi-level Meta-heuristic Approach for a Hazardous Waste Management Problem [Volume 33, Issue 7, 2020, Pages 1304-1310]
  • Amoozad-Khalili, Hossein Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
  • Amoozeidi, Sepideh A Novel Temporal-Frequency Domain Error Concealment Method for Motion Jpeg [Volume 23, Issue 2, 2010, Pages 121-132]
  • Amouei, M. A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
  • Amraee, T. Delay-Scheduled Controllers for Inter-Area Oscillations Considering Time Delays [Volume 31, Issue 11, 2018, Pages 1852-1861]
  • Amrane, Mohamed Nadir Effects of Material and Geometrical Parameters on the Free Vibration of Sandwich Beams [Volume 29, Issue 2, 2016, Pages 222-228]
  • Amrullah, A. Combustion Behavior of Fuel Briquettes Made from Ulin Wood and Gelam Wood Residues [Volume 33, Issue 11, 2020, Pages 2365-2371]
  • Anand, N. Influence of Fiber on Shear Behavior of Concrete Exposed to Elevated Temperature [Volume 33, Issue 10, 2020, Pages 1897-1903]
  • Anand, N. Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
  • Anbia, Mansoor Modified Nanoporous Carbon Material for Anionic Dye Removal from Aqueous Solution [Volume 25, Issue 4, 2012, Pages 259-268]
  • Anbia, Mansoor Aqueous Cadmium Ions Removal by Adsorption on APTMS Grafted Mesoporous Silica MCM-41 in Batch and Fixed Bed Column Processes [Volume 26, Issue 5, 2013, Pages 473-488]
  • Anbia, Mansoor Synthesis of Ethylenediamine-modified Ordered Mesoporous Carbon as a New Nanoporous Adsorbent for Removal of Cu(II) and Pb(II) Ions from Aqueous Media [Volume 27, Issue 9, 2014, Pages 1415-1422]
  • Anbia, Mansoor Novel Amine Modified Nanoporous SBA-15 Sorbent for the Removal of H2S from Gas Streams in the Presence of CH4 (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1697-1704]
  • Anbia, Mansoor Investigation of Carbon Dioxide Adsorption on Amino-Functionalized Mesoporous Silica [Volume 28, Issue 6, 2015, Pages 848-854]
  • Anbia, Mansoor Effect of Particle Size of NaX Zeolite on Adsorption of CO2/CH4 [Volume 29, Issue 1, 2016, Pages 1-7]
  • Anbia, Mansoor Synthesis and Characterization of Amine-modified Mesoporous SBA-15 for Carbon Dioxide Sequestration at High Pressure and Room Temperature (RESEARCH NOTE) [Volume 29, Issue 10, 2016, Pages 1341-1346]
  • Andami, Parisa Optimization of biodiesel production from sunflower oil transesterification using Ca-K/Al2O3 nanocatalysts [Volume 35, Issue 2, 2022]
  • Andargoli, S. M. H. Design of a High Range, High Efficiency Spread Spectrum Transmitter for Audio Communication Applications [Volume 32, Issue 8, 2019, Pages 1144-1154]
  • Andoko, A. Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
  • Ang, W. L Influence of Particle Size and Pressure Drop in Cake Filtration Process on Removal of Suspended Solids in Anaerobically Digested Palm Oil Mill Effluent [Volume 31, Issue 8, 2018, Pages 1437-1445]
  • Angra, S Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning [Volume 31, Issue 1, 2018, Pages 164-172]
  • Anisheh, Mahmoud Adaptive Segmentation with Optimal Window Length Scheme using Fractal Dimension and Wavelet Transform [Volume 22, Issue 3, 2009, Pages 257-268]
  • Anisheh, Mahmoud An Improved Automatic EEG Signal Segmentation Method based on Generalized Likelihood Ratio [Volume 27, Issue 7, 2014, Pages 1015-1022]
  • Anjomrouz, E. Scheduling Nurse Shifts Using Goal Programming Based on Nurse Preferences: A Case Study in an Emergency Department [Volume 32, Issue 7, 2019, Pages 954-963]
  • Ansari, K. Spice Compatible Model for Multiple Coupled Nonuniform Transmission Lines Application in Transient Analysis of VLSI Circuits [Volume 17, Issue 2, 2004, Pages 119-130]
  • Anuradha, K. Study and Analysis of A Simple Self Cascode Regulated Cascode Amplifier [Volume 31, Issue 10, 2018, Pages 1633-1641]
  • Anvari, M. A Database Model for Medical Consultation [Volume 4, Issue 1, 1991, Pages 23-30]
  • AR, Umayal Sundari Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector [Volume 27, Issue 5, 2014, Pages 811-818]
  • Arab, Najmeddin Analytical Modeling of Axi-Symmetric Sheet Metal Forming [Volume 24, Issue 1, 2011, Pages 55-63]
  • Arab, R Solving a New Multi-objective Inventory-Routing Problem by a Non-dominated Sorting Genetic Algorithm [Volume 31, Issue 4, 2018, Pages 588-596]
  • Arabani, M. Evaluation of Rough Set Theory for Decision Making of rehabilitation Method for Concrete Pavement [Volume 18, Issue 3, 2005, Pages 229-238]
  • Arabani, M. A Stochastic Model for Indirect Condition Monitoring Using Proportional Covariate Model [Volume 21, Issue 1, 2008, Pages 45-56]
  • Arabani, M. Evaluating the Semi-Circular Bending Test for HMA Mixtures [Volume 22, Issue 1, 2009, Pages 47-58]
  • Arabi, Amana Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
  • Arabi, S. M. Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
  • Arabieh, Massod Adsorptive Behavior of an Amberlite Anion Exchanger Resin for Uranium (VI) Sorption in the Presence of Sulfate Anions [Volume 29, Issue 2, 2016, Pages 170-175]
  • Arab Khaburi, D. A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
  • Arab Markadeh, G. R. A Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer [Volume 19, Issue 1, 2006, Pages 21-34]
  • Arab Markadeh, G. R. An Optimal Selection of Induction Heating Capacitance by Genetic Algorithm Considering Dissipation Loss Caused by ESR (TECHNICAL NOTE) [Volume 24, Issue 1, 2011, Pages 19-26]
  • Arabpour D., Farzad Application of Nanotechnology in Self-Compacting Concrete Design [Volume 22, Issue 3, 2009, Pages 229-244]
  • Arabzadeh, A. A Simple Approach to Predict the Shear Capacity and Failure Mode of Fix-ended Reinforced Concrete Deep Beams based on Experimental Study [Volume 32, Issue 4, 2019, Pages 474-483]
  • Arahman, Nasrul Adsorption Performance of Low-cost Java Plum Leaves and Guava Fruits as Natural Adsorbents for Removal of Free Fatty Acids from Coconut Oil [Volume 32, Issue 10, 2019, Pages 1372-1378]
  • Arami, H. Electrochemical Deposition of Flower-Like Nickel Nanostructures on Well-Defined n-Si (111):H [Volume 21, Issue 2, 2008, Pages 177-182]
  • Aramon-Bajestani, M. A Novel B and B Algorithm for a Unrelated Parallel Machine Scheduling Problem to Minimize the Total Weighted Tardiness [Volume 22, Issue 3, 2009, Pages 269-286]
  • Arasteh, J. Effect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy [Volume 33, Issue 9, 2020, Pages 1766-1772]
  • Arbab, M. H. Significant Error Propagation in the Finite Difference Solution of Non-Linear Magnetostatic Problems Utilizing Boundary Condition of the Third Kind [Volume 16, Issue 4, 2003, Pages 319-330]
  • Arbabi, Faraz Numerical Modeling of an Innovative Bipolar Plate Design Based on the Leaf Venation Patterns for PEM Fuel Cells [Volume 25, Issue 3, 2012, Pages 177-186]
  • Arbabtafti, M. Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
  • Arbabtafti, M. Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
  • Ardana, M.D.W The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
  • Ardekani, M.A. Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 460-466]
  • Ardeshir, A A Prioritization Model for HSE Risk Assessment Using Combined Failure Mode, Effect Analysis, and Fuzzy Inference System: A Case Study in Iranian Construction Industry [Volume 31, Issue 9, 2018, Pages 1487-1497]
  • Ardeshir, A. Development of a Low Cost and Safe PIV for Mean Flow Velocity and Reynolds Stress Measurements [Volume 20, Issue 2, 2007, Pages 105-116]
  • Ardeshir, Ahmad Can the History Force be Neglected for the Motion of Particles at High Subcritical Reynolds Number Range? [Volume 19, Issue 1, 2006, Pages 23-34]
  • Ardeshir, G A Simple General-purpose I-V Model for All Operating Modes of Deep Submicron MOSFETs [Volume 31, Issue 2, 2018, Pages 270-277]
  • Ardeshir, G The Influence of DC-Link Voltage on Commutation Torque Ripple of Brushless DC Motors with Two-Segment Pulse-width Modulation Control Method [Volume 31, Issue 2, 2018, Pages 307-314]
  • Ardeshir, G. A New Analog-based LO Harmonic Rejection Technique with Tunable Notch Frequency [Volume 31, Issue 11, 2018, Pages 1893-1902]
  • Ardeshir, G. Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
  • Ardeshir, Gholamreza Statistical Background Modeling Based on Velocity and Orientation of Moving Objects [Volume 21, Issue 1, 2008, Pages 39-54]
  • Ardeshir, Gholamreza Dual Phase Detector Based Delay Locked Loop for High Speed Applications [Volume 27, Issue 4, 2014, Pages 517-522]
  • Ardeshir, Gholamreza Using a Novel Concept of Potential Pixel Energy for Object Tracking [Volume 27, Issue 7, 2014, Pages 1023-1032]
  • Ardeshir, Gholamreza Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
  • Ardeshir, Gholamreza Improving Linearity of CMOS Variable-gain Amplifier Using Third-order Intermodulation Cancellation Mechanism and Intermodulation Distortion Sinking Techniques [Volume 30, Issue 2, 2017, Pages 192-198]
  • Ardeshiri, Anam An Approach for the Estimation of Aggregate Potential Telecommuting Demand [Volume 24, Issue 4, 2011, Pages 331-340]
  • Ardestani, F. Poultry Slaughterhouse Wastewater Treatment Using Anaerobic Fluid Bed Reactor and Aerobic Mobile-Bed Biological Reactor [Volume 32, Issue 5, 2019, Pages 634-640]
  • Ardestani, Fatemeh Evaluation of Cell Growth and Substrate Consumption Kinetic of Five Different Lactobacilli in a Submerged Batch Whey Culture for Lactic Acid Production [Volume 28, Issue 7, 2015, Pages 970-977]
  • Arefian, N.A. Effects of the pH of Initial Solution on Hydrothermally Synthesized TiO2 Nanoparticles [Volume 25, Issue 2, 2012, Pages 131-136]
  • Arefin, A. Investigation of Different Validation Parameters of Micro Gas Turbine for Range Extender Electric Truck [Volume 31, Issue 10, 2018, Pages 1782-1788]
  • Arefmanesh, Ali Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
  • Arefnia, A. Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils [Volume 32, Issue 3, 2019, Pages 373-380]
  • Arehpanahi, M Position Control Improvement of Permanent Magnet Motor Using Model Predictive Control [Volume 31, Issue 7, 2018, Pages 1044-1049]
  • Arehpanahi, M A New Single-phase Symmetrical Cascade Multilevel Inverter with Low Number of Power Switches [Volume 31, Issue 8, 2018, Pages 1228-1233]
  • Arehpanahi, M. A New Optimization of Segmented Interior Permanent Magnet Synchronous Motor Based on Increasing Flux Weakening Range and Output Torque (Research Note) [Volume 33, Issue 6, 2020, Pages 1122-1127]
  • Argimbaev, K. R. Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
  • Argimbaev, K. R. Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
  • Argimbaev, K. R. Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
  • Argimbaev, K. R. Investigations on Material Composition of Iron-containing Tails of Enrichment of Combined Mining and Processing in Kursk Magnetic Anomaly of Russia [Volume 33, Issue 7, 2020, Pages 1431-1439]
  • Arham Nmazi, Abas Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
  • Arief, Yanuar Z. Tensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types [Volume 29, Issue 9, 2016, Pages 1257-1262]
  • Arifuzzaman, A. K. M Deterioration of Concrete in Ambient Marine Environment (RESEARCH NOTE) [Volume 25, Issue 4, 2012, Pages 289-302]
  • Arif Wibisono, M Modelling and Optimisation of Coconut Shell Drying and Carbonisation Using Multi-response Taguchi Method with Multi-response Signal-to-noise Procedure [Volume 31, Issue 3, 2018, Pages 464-472]
  • Aripin, H Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022]
  • Arish, N. Development of Linear Vernier Hybrid Permanent Magnet Machine for Wave Energy Converter [Volume 33, Issue 5, 2020, Pages 805-813]
  • Arish, N. Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
  • Arish, N. Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
  • Arivazhagan, Selvaraj Object Recognition based on Local Steering Kernel and SVM [Volume 26, Issue 11, 2013, Pages 1281-1288]
  • Ariz, M. Thermal Performance of Jet Impingement with Spent Flow Management [Volume 30, Issue 10, 2017, Pages 1599-1608]
  • Arjmandi, A Interpreting the CO2 adsorption on functionalized organic group of IRMOF-1: A B3LYP DFT based study [Volume 31, Issue 9, 2018, Pages 1473-1479]
  • Arjmandi, M Interpreting the CO2 adsorption on functionalized organic group of IRMOF-1: A B3LYP DFT based study [Volume 31, Issue 9, 2018, Pages 1473-1479]
  • Arjomand, M. A. Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils [Volume 32, Issue 3, 2019, Pages 373-380]
  • Arjomand, M. A. An Experimental Study on Geogrid with Geotextile Effects Aimed to Improve Clayey Soil [Volume 32, Issue 5, 2019, Pages 685-692]
  • Arkat, J Modeling the Trade-off between Manufacturing Cell Design and Supply Chain Design [Volume 31, Issue 4, 2018, Pages 640-647]
  • Arkat, J. Sustainable Surface Water Management and Wastewater Treatment Plant Location: A Case Study of Urmia Lake [Volume 33, Issue 4, 2020, Pages 621-630]
  • Arkat, J. A Hybrid Genetic Algorithm for Integrated Production and Distribution Scheduling Problem with Outsourcing Allowed [Volume 33, Issue 11, 2020, Pages 2285-2298]
  • Arkat, J. Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
  • Arkat, J. Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
  • Arkat, Jamal A Generalized Linear Statistical Model Approach to Monitor Profiles [Volume 20, Issue 3, 2007, Pages 233-242]
  • Arkat, Jamal Network Location Problem with Stochastic and Uniformly Distributed Demands [Volume 29, Issue 5, 2016, Pages 654-662]
  • Arkat, Jamal Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
  • Aroo, H. Temperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy [Volume 33, Issue 8, 2020, Pages 1579-1589]
  • Arora, A. Impact Analysis of Variation in Geometrical Features on Intrinsic Characteristics of Capacitive Micro-machined Ultrasonic Transducers [Volume 31, Issue 11, 2018, Pages 1846-1851]
  • Arora, V. K. Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model [Volume 30, Issue 4, 2017, Pages 479-485]
  • Arsana, I. M. Effect of Wire Pitch on Capacity of Single Staggered Wire and Tube Heat Exchanger Using Computational Fluid Dynamic Simulation [Volume 33, Issue 8, 2020, Pages 1637-1642]
  • Arsana, I. M. Simulation Study on Efficiency of Woven Matrix Wire and Tube Heat Exchanger [Volume 33, Issue 12, 2020, Pages 2572-2577]
  • Arshadi, M. R. Synergistic Influence of Benzoate Ions on Inhibition of Corrosion of Mild Steel in 0.5m Sulfuric Acid by Benzotriazole [Volume 16, Issue 3, 2003, Pages 255-264]
  • Arshadi khamseh, A A New Combination of Robust-possibilistic Mathematical Programming for Resilient Supply Chain Network under Disruptions and Uncertainty: A Real Supply Chain (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 612-621]
  • Arshadikhamseh, A A Robust Reliable Closed Loop Supply Chain Network Design under Uncertainty: A Case Study in Equipment Training Centers [Volume 31, Issue 4, 2018, Pages 648-658]
  • Arshadikhamseh, A Optimal Decisions in a Dual-channel Supply Chain for the Substitute Products with the Special Orders under DisruptionRisk and Brand Consideration [Volume 31, Issue 5, 2018, Pages 759-769]
  • Arshi, A. R. Kinesiological Description of Hippotherapy as a Treatment Modality [Volume 33, Issue 11, 2020, Pages 2347-2355]
  • Arulraj, P. G. Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
  • Arulraj, P. G. Influence of Fiber on Shear Behavior of Concrete Exposed to Elevated Temperature [Volume 33, Issue 10, 2020, Pages 1897-1903]
  • Arunkumar, N. An Ultra-low-power Static Random-Access Memory Cell Using Tunneling Field Effect Transistor [Volume 33, Issue 11, 2020, Pages 2215-2221]
  • Arunraj, E Experimental Study on Compressive Strength of Brick Using Natural Fibres [Volume 32, Issue 6, 2019, Pages 799-804]
  • Arunraj, E. A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
  • Arvan, Mohammad Reza Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism [Volume 27, Issue 1, 2014, Pages 157-170]
  • Aryana, F. Analysis of Natural Frequencies for a Laminated Composite Plate with Piezoelectric Patches using the First and Second Eigenvalue Derivatives [Volume 21, Issue 1, 2008, Pages 85-96]
  • Aryanezhad, M.B. A Partially Observable Markovian Maintenance Process with Continuous Cost Functions [Volume 1, Issue 4, 1988, Pages 201-210]
  • Aryanezhad, M.B. Bus Assignment to Iranian Pilgrims During Pilgrimage [Volume 10, Issue 3, 1997, Pages 153-162]
  • Aryanezhad, M.B. A new Approach Versus Benders Decomposition in Aggregate Production Planning [Volume 14, Issue 4, 2001, Pages 351-360]
  • Aryanezhad, M.B. Two Stage Multiple Attribute Decision Making Problem in Iranian Gas Distribution Systems [Volume 17, Issue 2, 2004, Pages 135-144]
  • Aryanezhad, M.B. A Holistic Approach Based on MCDM for Solving Location Problems [Volume 20, Issue 3, 2007, Pages 251-262]
  • Aryanezhad, M.B. A New Multi-Objective Model for a Cell Formation Problem Considering Machine Utilization and Alternative Process Routes (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 21-32]
  • Aryanezhad, M.B. A Mathematical Method for Managing the System Constraint [Volume 24, Issue 1, 2011, Pages 37-47]
  • Asadi, A. Process Performance of a Granular Single Bioreactor with Continuous Feeding and Intermittent Discharge Regime Treating Dairy Wastewater [Volume 32, Issue 1, 2019, Pages 10-17]
  • Asadi, A. Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment [Volume 32, Issue 2, 2019, Pages 184-192]
  • Asadi, Abolfazl Optimal Placement and Sizing of Fault Current Limiter in a Real Network: a Case Study (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 402-409]
  • Asadi, Azar A Comparative Study on Performance of Two Aerobic Sequencing Batch Reactors with Flocculated and Granulated Sludge Treating an Industrial Estate Wastewater: Process Analysis and Modeling [Volume 26, Issue 2, 2013, Pages 105-116]
  • Asadi, Bahman Computational Simulation of Hydrodynamic Convection in Rising Bubble Under Microgravity Condition [Volume 22, Issue 3, 2009, Pages 295-305]
  • Asadi, M. Dairy Wastewater Treatment using Three-Stage Rotating Biological Contactor (NRBC) [Volume 22, Issue 2, 2009, Pages 107-114]
  • Asadi, M. Environmental Impact of Fossil Fuel Utilization in Neka Thermal Power Plant [Volume 23, Issue 2, 2010, Pages 115-120]
  • Asadi, Sekineh Image Quality Enhancement Using Pixel Wise Gamma Correction [Volume 24, Issue 4, 2011, Pages 301-312]
  • Asadi, Sekineh Improving Dark Channel Prior for Single Image Dehazing [Volume 28, Issue 6, 2015, Pages 880-887]
  • Asadi, Sekineh Deblocking Joint Photographic Experts Group Compressed Images via Self-learning Sparse Representation [Volume 29, Issue 12, 2016, Pages 1684-1690]
  • Asadi, Y. Investigation of Dual Fuel Diesel Engine With Particular Reference to Engine Cycle Model [Volume 2, Issue 1, 1989, Pages 65-70]
  • Asadi Amiri, S. Image Enhancement Using an Adaptive Un-sharp Masking Method Considering the Gradient Variation [Volume 30, Issue 8, 2017, Pages 1118-1125]
  • Asadi Amiri, S. Adaptive Image Dehazing via Improving Dark Channel Prior [Volume 32, Issue 2, 2019, Pages 249-255]
  • Asadian, Keivan Effect of Formation of Ag2Ti4O9 Phase on Photocatalytic Activity of Ag-TiO2 Nanocomposite [Volume 29, Issue 5, 2016, Pages 663-668]
  • Asadi Saeed Abad, F. An Architecture for Security and Protection of Big Data [Volume 30, Issue 10, 2017, Pages 1479-1486]
  • Asadi Yousef-abad, S. Kobra Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
  • Asadi Zarch, Mahdi Microstructure and Corrosion Performance of Silica Coatings on Aluminum Surface Prepared by Plasma Electrolysis Technique [Volume 22, Issue 3, 2009, Pages 291-298]
  • Asadollahzadeh, M. Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
  • Asadollahzadeh, Mehdi Studies of Drop Behavior and Prediction of Sauter Mean Drop Diameter in Various Rotary Agitated Extraction Columns [Volume 29, Issue 8, 2016, Pages 1047-1055]
  • Asadollahzadeh, Mehdi Extraction of Molybdenum (VI) and Vanadium (V) from Nitrate Solutions Using Coupling of Acid and Solvating Extractants (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1366-1371]
  • Asadpour, M. A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
  • Asadpour, R. Further Study of Adsorption of Crude Oils onto Acetylated Corn Silk and its Kinetics and Equilibrium Isotherm [Volume 32, Issue 2, 2019, Pages 229-235]
  • A. Samani, A. Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
  • Asayesh, M. Vibration Analysis of Rotating Shaft with Loose Disk [Volume 15, Issue 4, 2002, Pages 385-393]
  • Asefi, Monireh An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
  • Asemaneh, H. R. Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
  • Asgari, Ali Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis [Volume 26, Issue 6, 2013, Pages 621-630]
  • Asgari, G. Sonocatalytic Degradation of p-Chlorophenol by Nanoscale Zero-valent Copper Activated Persulfate under Ultrasonic Irradiation in Aqueous Solutions [Volume 33, Issue 6, 2020, Pages 1061-1069]
  • Asgari, H. Quaternion-based Finite-time Sliding Mode Controller Design for Attitude Tracking of a Rigid Spacecraft during High-thrust Orbital Maneuver in the Presence of Disturbance Torques [Volume 32, Issue 3, 2019, Pages 430-437]
  • Asgari, M Evaluation of Project Critical Success Factors for Key Construction Players and Objectives [Volume 31, Issue 2, 2018, Pages 228-240]
  • Asgari, M Vibration Behavior of Nanocomposite Plate Reinforced by Pristine and Defective Graphene Sheets; an Analytical Approach [Volume 31, Issue 7, 2018, Pages 1095-1102]
  • Asgari, M. Investigating The Seismic Response of Structural Walls Using Nonlinear Static and Incremental Dynamic Analyses [Volume 30, Issue 11, 2017, Pages 1691-1699]
  • Asgari, M.S. Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
  • Asgari, S. Abnormal Plastic Behavior of Fine Grain Mp35n Alloy During Room Temperature Tensile Testing [Volume 16, Issue 2, 2003, Pages 163-170]
  • Asgari, S. A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
  • Asghari, A Effect of Ambient Condition on the Shower Cooling Tower in Four Type of Climates Condition [Volume 31, Issue 5, 2018, Pages 841-846]
  • Asghari, R. Delay-Scheduled Controllers for Inter-Area Oscillations Considering Time Delays [Volume 31, Issue 11, 2018, Pages 1852-1861]
  • Asgharian Marzabad, M. Determination of Riboflavin by Nanocomposite Modified Carbon Paste Electrode in Biological Fluids Using Fast Fourier Transform Square Wave Voltammetry [Volume 33, Issue 9, 2020, Pages 1696-1702]
  • Asgharpoor, M. J. Solving a Stochastic Cellular Manufacturing Model by Using Genetic Algorithms [Volume 17, Issue 2, 2004, Pages 145-156]
  • Asgharpour, Somayeh Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
  • Ashoka Reddy, K. Empirical Mode Decomposition based Adaptive Filtering for Orthogonal Frequency Division Multiplexing Channel Estimation [Volume 30, Issue 10, 2017, Pages 1517-1525]
  • Ashoorian, Peyman A Comparative Study of VHDL Implementation of FT-2D-cGA and FT-3D-cGA on Different Benchmarks (RESEARCH NOTE) [Volume 28, Issue 9, 2015, Pages 1276-1285]
  • Ashory, M. R A Computational Study about the Effect of Turbines Pitched Blade Attack Angle on the Power Consumption of a Stirred Tank [Volume 31, Issue 1, 2018, Pages 65-70]
  • Ashorynejad, Hamid Reza Lattice Boltzmann Simulation of Nanofluids Natural Convection Heat Transfer in Concentric Annulus (TECHNICAL NOTE) [Volume 26, Issue 8, 2013, Pages 895-904]
  • Ashourian, Mohsen A Novel Temporal-Frequency Domain Error Concealment Method for Motion Jpeg [Volume 23, Issue 2, 2010, Pages 121-132]
  • Ashourian, Mohsen Real Time Implementation of a License Plate Location Recognition System Based on Adaptive Morphology [Volume 26, Issue 11, 2013, Pages 1347-1356]
  • Ashouri-Talouki, M. DoS-Resistant Attribute-Based Encryption in Mobile Cloud Computing with Revocation [Volume 32, Issue 9, 2019, Pages 1290-1298]
  • Ashrafi, A. Theoretical Studies of Electrical Characteristics of the Nitrogen Laser [Volume 7, Issue 3, 1994, Pages 143-154]
  • Ashrafi, A. A New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion [Volume 15, Issue 2, 2002, Pages 145-156]
  • Ashrafi, A. Studying the Effective Parameters on Teeth Height in Internal Gear Flowforming Process [Volume 33, Issue 12, 2020, Pages 2563-2571]
  • Ashrafi, Arash Numerical Study on Improvement of Hydrofoil Performance using Vortex Generators (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 305-313]
  • Ashrafi, Hossein A General Boundary Element Formulation for The Analysis of Viscoelastic Problems [Volume 23, Issue 2, 2010, Pages 153-168]
  • Ashraf Talesh, Seyed Siamak A Dimensionless Parameter Approach based on Singular Value Decomposition and Evolutionary Algorithm for Prediction of Carbamazepine Particles Size [Volume 30, Issue 3, 2017, Pages 330-337]
  • Ashrafzadeh, Fedra Introducing Padded Wall to Reduce Sloshing Induced Wall Pressure in Water Storage Tanks [Volume 27, Issue 12, 2014, Pages 1823-1831]
  • Ashrafzadeh, Fedra Introduction of Air Cushion to Reduce Seismic Demand in Cylindrical Water Storage Tanks [Volume 29, Issue 4, 2016, Pages 464-472]
  • Ashtari, parviz Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
  • Ashuri, Atefeh Drift Change Point Estimation in the rate and dependence Parameters of Autocorrelated Poisson Count Processes Using MLE Approach: An Application to IP Counts Data [Volume 28, Issue 7, 2015, Pages 1021-1030]
  • Askari, T. Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
  • Askarian Abyaneh, H. A New Approach for Determination of Break Points for Protection Co-Ordination [Volume 16, Issue 2, 2003, Pages 133-142]
  • Askarian Abyaneh, H. A Novel Fuzzy and Artificial Neural Network Representation of Overcurrent Relay Characteristics [Volume 16, Issue 3, 2003, Pages 233-246]
  • Askari D., Yousef Ultimate Unbonded Tendon Stress in CFRP Strengthened Post-Tensioned Indeterminate I-Beams Cast with HSCs [Volume 28, Issue 3, 2015, Pages 350-359]
  • Askari Lasaki, Salar Mathematical Modeling of Potential Flow over a Rotating Cylinder (RESEARCH NOTE) [Volume 24, Issue 1, 2011, Pages 55-63]
  • Askari Lasaki, Salar Oil Reservoirs Classification Using Fuzzy Clustering (RESEARCH NOTE) [Volume 30, Issue 9, 2017, Pages 1391-1400]
  • Askarinejad, H. Influences of Track Structure, Geometry and Traffic Parameters on Railway Deterioration [Volume 20, Issue 3, 2007, Pages 292-300]
  • Askaripour, K. Diagnosis of Delaminated Composites Using Post-processed Strain Measurements under Impact Loading [Volume 32, Issue 1, 2019, Pages 54-61]
  • Askarizadeh, Hossein Analytical Analysis of The Dual-phase-lag Heat Transfer Equation in a Finite Slab with Periodic Surface Heat Flux (RESEARCH NOTE) [Volume 27, Issue 6, 2014, Pages 971-978]
  • Aslami, M. H. Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
  • Asl Hadad, A. A Novel Excellence Model of the ICT Industry: Case Study on Telecommunications Backbone Network of Iran [Volume 33, Issue 10, 2020, Pages 2016-2029]
  • Aslipour, Z. Identification of Wind Turbine using Fractional Order Dynamic Neural Network and Optimization Algorithm [Volume 33, Issue 2, 2020, Pages 277-284]
  • Assadat Yaghubi, N. Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
  • Assadi, A. Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
  • Assari, Mohammad Reza Numerical Study of Water-Air Ejector Using Mixture and Two-Phase Models [Volume 35, Issue 2, 2022]
  • Assari, Mohammad Reza Numerical study of the steps height and glass cover angle effect on the heat transfer performance for solar distillation [Volume 35, Issue 1, 2022]
  • Assari, M. R. Performance of Rotating Solar Still with Rotating External Reflectors (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 884-892]
  • Assari, M. R. Experimental Investigation of Sinusoidal Tube in Triplex-Tube Heat Exchanger during Charging and Discharging Processes Using Phase Change Materials [Volume 32, Issue 7, 2019, Pages 999-1009]
  • Assempour, A. Determination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique [Volume 15, Issue 2, 2002, Pages 167-172]
  • Assempour, A. Evaluation of Forming Severity and Thickness Variation in Deep Drawing Process [Volume 16, Issue 2, 2003, Pages 171-182]
  • Assempour, A. An Upper Bound Approach for Analysis of Hydroforming of Sheet Metals [Volume 17, Issue 4, 2004, Pages 389-398]
  • Assempour, A. The Performance of Karafillis-Boyce Yield Function on Determination of Forming Limit Diagrams [Volume 20, Issue 1, 2007, Pages 55-66]
  • Aswad, M. A. Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
  • Aswad, M. A. Study on Iraqi Bauxite Ceramic Reinforced Aluminum Metal Matrix Composite Synthesized by Stir Casting [Volume 33, Issue 7, 2020, Pages 1331-1339]
  • Asyaei, M A New Circuit Scheme for Wide Dynamic Circuits [Volume 31, Issue 5, 2018, Pages 699-704]
  • Atabi, F. Wind Energy Estimation for Production of Electricity in Iran [Volume 10, Issue 1, 1997, Pages 19-26]
  • Ataee-pour, Majid Choosing the Optimum Underground Mine Layout with Regard to Metal Price Uncertainty Using Expected Utility Theory [Volume 32, Issue 12, 2019, Pages 1813-1822]
  • Ataei, Mohammad Using 2D Lerchs and Grossmann Algorithm to Design Final Pit Limits of Sungun Copper Deposit of Iran (TECHNICAL NOTE) [Volume 13, Issue 4, 2000, Pages 81-89]
  • Ataeian, Arash An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes [Volume 24, Issue 2, 2011, Pages 191-196]
  • AtaKaramians, S. A New Method for Calculating Propagation Modes of a One Dimensional Photonic Crystal (RESEARCH NOTE) [Volume 17, Issue 1, 2004, Pages 25-28]
  • Atashafrooz, Meysam Three Dimensional Laminar Convection Flow of Radiating Gas over a Backward Facing Step in a Duct [Volume 25, Issue 4, 2012, Pages 399-410]
  • Atashi, H. The Effects of Potassium Promoter on the Syngas Conversion of Cobalt Catalysts (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 285-293]
  • Atashipour, Seyed Rasoul Exact Analytical Solution for Bending Analysis of Functionally Graded Annular Sector Plates [Volume 22, Issue 3, 2009, Pages 307-316]
  • Atashipour, Seyed Rasoul Exact Elasticity Solutions for Thick-Walled FG Spherical Pressure Vessels with Linearly and Exponentially Varying Properties [Volume 22, Issue 4, 2009, Pages 405-416]
  • Atashipour, Seyed Rasoul An Elasticity Solution for Static Analysis of Functionally Graded Curved Beam Subjected to a Shear Force [Volume 23, Issue 2, 2010, Pages 169-178]
  • Atashkari, K. AERO-THERMODYNAMIC OPTIMIZATION OF TURBOPROP ENGINES USING MULTI-OBJECTIVE GENETIC ALGORITHMS [Volume 23, Issue 3, 2010, Pages 253-266]
  • Atashnezhad, A. Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
  • Atia, Aissa Effect of Magnetic Field on the Rotating Flow in a Similar Czochralski Configuration [Volume 29, Issue 4, 2016, Pages 563-571]
  • Attaran, B. A Novel Intelligent Fault Diagnosis Approach for Critical Rotating Machinery in the Time-frequency Domain [Volume 33, Issue 4, 2020, Pages 668-675]
  • Attaran, Behrooz Oscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1167-1174]
  • Attaran, Behrooz Optimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE) [Volume 29, Issue 9, 2016, Pages 1300-1306]
  • Attaran, Behrooz Numerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions [Volume 30, Issue 6, 2017, Pages 887-894]
  • Attarchi, Mehdi Pulse Reverse Electrodeposition of Spherical Ni-MWCNT Composite Skein [Volume 22, Issue 2, 2009, Pages 161-168]
  • Attarian, Saeid Surface Pressure Contour Prediction Using a GRNN Algorithm [Volume 27, Issue 6, 2014, Pages 819-828]
  • Attia, E.-A. Mistake Proofing Cam Mechanism Through Six-sigma Process: Case Study on Clothes Printing Machines [Volume 32, Issue 3, 2019, Pages 438-444]
  • Aujloo, A. A Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor [Volume 14, Issue 3, 2001, Pages 201-208]
  • Austin, N Predictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models [Volume 31, Issue 1, 2018, Pages 32-37]
  • Auti, Abhijit Experimental and Theoretical Study of Thompson Seedless Grapes Drying using Solar Evacuated Tube Collector with Force Convection Method [Volume 28, Issue 12, 2015, Pages 1796-1801]
  • Avanessian, J. The Potentiodynamic Behavior of Copper in NaCI Solutions Studied by Auger and Photoelectron Spectroscopy [Volume 1, Issue 1, 1988, Pages 1-6]
  • Avilés, O Hardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources [Volume 31, Issue 8, 2018, Pages 1215-1221]
  • Avilés, O. F. A Real-time Motion Tracking Wireless System for Upper Limb Exosuit Based on Inertial Measurement Units and Flex Sensors (TECHNICAL NOTE) [Volume 32, Issue 6, 2019, Pages 820-827]
  • Avşar Aydin, E. Low-cost Vector Network Analyzer for Biomedical Applications [Volume 32, Issue 3, 2019, Pages 400-404]
  • Awad, S. H. Study on Iraqi Bauxite Ceramic Reinforced Aluminum Metal Matrix Composite Synthesized by Stir Casting [Volume 33, Issue 7, 2020, Pages 1331-1339]
  • Awale, R A Unique Approach of Noise Elimination from Electroencephalography Signals between Normal and Meditation State [Volume 31, Issue 5, 2018, Pages 719-728]
  • Awale, R. N. A Comparative Analysis of Wavelet-Based FEMG Signal Denoising with Threshold Functions and Facial Expression Classification Using SVM and LSSVM [Volume 33, Issue 7, 2020, Pages 1249-1256]
  • Awang, H. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Awang, M. Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
  • Awang, Mariyamni B. Lattice Gas Automata Simulation of Adsorption Process of Polymer in Porous Media [Volume 17, Issue 4, 2004, Pages 329-338]
  • Awang, Mokhtar Thermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam (TECHNICAL NOTE) [Volume 32, Issue 10, 2019, Pages 1480-1484]
  • Awda, Laith Analysis of Temperature Effect on a Crystalline Silicon Photovoltaic Module Performance [Volume 29, Issue 5, 2016, Pages 722-727]
  • Ayadat, T. Optimizing of Steel Fiber Reinforced Concrete Mix Design [Volume 17, Issue 1, 2004, Pages 41-50]
  • Ayadat, T. Failure Process of Stone Columns in Collapsible Soils [Volume 21, Issue 2, 2008, Pages 135-142]
  • Ayadat, T. ASSESSEMENT OF SOIL COLLAPSE PREDICTION METHODS [Volume 25, Issue 1, 2012, Pages 19-26]
  • Ayati, E. Rural Road Traffic Accidents in Iran [Volume 2, Issue 3, 1989, Pages 88-97]
  • Ayati, E. The Cost of Road Accidents in Iran [Volume 2, Issue 3, 1989, Pages 98-103]
  • Ayoubi, M. Change Point Estimation of the Stationary State in Auto Regressive Moving Average Models, Using Maximum Likelihood Estimation and Singular Value Decomposition-based Filtering [Volume 32, Issue 5, 2019, Pages 726-736]
  • Ayremlouzadeh, Hadi Numerical Investigation on the Effect of Mold Design on Shrinkage of Sand Casted Multistage BB3-6×6 Pump Casing (RESEARCH NOTE) [Volume 29, Issue 8, 2016, Pages 1175-1182]
  • Ayremlouzadeh, Hadi Computational Fluid Dynamics Simulation and Experimental Validation of Hydraulic Performance of a Vertical Suspended API Pump (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1612-1619]
  • Azad, E Interconnected Heat Pipe Solar Collector [Volume 22, Issue 3, 2009, Pages 233-242]
  • Azadeh, Ali From Theory to Practice: a Total Ergonomics Model of a Manufacturing System [Volume 15, Issue 3, 2002, Pages 257-268]
  • Azadi, Arman A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
  • Azadi, M. The Effect of Various Parameters on Out-of-phase Thermo-mechanical Fatigue Lifetime of A356.0 Cast Aluminum Alloy [Volume 26, Issue 12, 2013, Pages 1461-1470]
  • Azadi, M. Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
  • Azadi, M. Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
  • Azadi, M. Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy [Volume 32, Issue 1, 2019, Pages 92-98]
  • Azadi, M. Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy [Volume 32, Issue 1, 2019, Pages 92-98]
  • Azadi, M. Effects of Ageing and Forging on Short-term Creep Behaviors of Inconel-713C Superalloy at 850 °C [Volume 33, Issue 4, 2020, Pages 639-646]
  • Azadi, M. Effects of Ageing and Forging on Short-term Creep Behaviors of Inconel-713C Superalloy at 850 °C [Volume 33, Issue 4, 2020, Pages 639-646]
  • Azadi, M. Temperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy [Volume 33, Issue 8, 2020, Pages 1579-1589]
  • Azadi, Mahboobeh Effect of Temperature and Gas Flux on the Mechanical Behavior of TiC Coating by Pulsed DC Plasma Enhanced Chemical Vapor Deposition(TECHNICAL NOTE) [Volume 27, Issue 8, 2014, Pages 1243-1250]
  • Azadi, Mahboobeh A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition [Volume 29, Issue 5, 2016, Pages 677-687]
  • Azadi, Mahboobeh Corrosion Failure Study in an Oil Cooler Heat Exchanger in Marine Diesel Engine [Volume 29, Issue 11, 2016, Pages 1604-1611]
  • Azadi, Mohammad Corrosion Failure Study in an Oil Cooler Heat Exchanger in Marine Diesel Engine [Volume 29, Issue 11, 2016, Pages 1604-1611]
  • Azadi, S. Air-Fuel Ratio Control of a Lean Burn SI Engine Using Fuzzy Self Tuning Method [Volume 13, Issue 2, 2000, Pages 45-54]
  • Azadi, Shahram Liquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes [Volume 28, Issue 11, 2015, Pages 1671-1679]
  • Azadnia, A. H. An Adaptive Fuzzy Neural Network Model for Bankruptcy Prediction of Listed Companies on the Tehran Stock Exchange [Volume 30, Issue 12, 2017, Pages 1879-1884]
  • Azadnia, Amir Hossein A Multi-objective Mathematical Model for Sustainable Supplier Selection and Order Lot-Sizing under Inflation [Volume 29, Issue 8, 2016, Pages 1141-1150]
  • Azadpour, F. Stress-Strain Field and Theoretical Analysis of RC Bridge [Volume 22, Issue 1, 2009, Pages 7-22]
  • Azami, G. Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
  • Azami, Hamed An Improved Automatic EEG Signal Segmentation Method based on Generalized Likelihood Ratio [Volume 27, Issue 7, 2014, Pages 1015-1022]
  • Azan, D. Effect of Fuzzy Boundaries on the Bearing Capacity of Footings on Two-Layered Clay [Volume 32, Issue 5, 2019, Pages 667-672]
  • Azargoman, M. Experimental Investigation and Statistical Modeling of the Effective Parameters in Charpy Impact Test on AZ31 Magnesium Alloy with V-shape Groove Using Taguchi Method [Volume 33, Issue 12, 2020, Pages 2521-2529]
  • Azari, Faeze Improving Dark Channel Prior for Single Image Dehazing [Volume 28, Issue 6, 2015, Pages 880-887]
  • Azari, Mehdi Zone-3 Impadance Reach Setting of Distance Relays by Including In-feed Current Effects in an Adaptive Scheme [Volume 27, Issue 7, 2014, Pages 1051-1060]
  • Azari Nasrabad, F. Adaptive Image Dehazing via Improving Dark Channel Prior [Volume 32, Issue 2, 2019, Pages 249-255]
  • Azaron, A. Dynamic Multi Period Production Planning Problem with Semi Markovian Variable Cost (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 269-274]
  • Azaron, A. Longest Path in Networks of Queues in the Steady-State [Volume 17, Issue 1, 2004, Pages 33-50]
  • Azaron, A. Bicriteria Resource Allocation Problem in Pert Networks [Volume 17, Issue 2, 2004, Pages 157-168]
  • Azaron, A. Optimal Control of Service Rate in a Service Center with Lapse (Research Note) [Volume 17, Issue 3, 2004, Pages 289-298]
  • Azaron, A. Multi-Objective Lead Time Control in Multistage Assembly Systems (TECHNICAL NOTE) [Volume 18, Issue 4, 2005, Pages 359-370]
  • Azazari.khosroshahi, rasoul The Influence Of Process Control Agent (P.C.A)’S State on Expedition of Mechanical Alloying of Anostructure Tial(Γ) Alloy [Volume 23, Issue 2, 2010, Pages 139-146]
  • Azazari.khosroshahi, rasoul Studying the Effect of Productive Factors on Synthesis of Anostructure Tial (Γ) Alloy By Mechanical Alloying [Volume 23, Issue 2, 2010, Pages 147-156]
  • Azazari.khosroshahi, rasoul Synthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy [Volume 24, Issue 2, 2011, Pages 123-130]
  • Azdast, T Tensile and Morphological Properties of Microcellular Polymeric Nanocomposite Foams Reinforced with Multi-walled Carbon Nanotubes [Volume 31, Issue 3, 2018, Pages 504-510]
  • Azdast, T Effect of Different Nanoparticles and Friction Stir Process Parameters on Surface Hardness and Morphology of Acrylonitrile Butadiene Styrene [Volume 31, Issue 7, 2018, Pages 1117-1122]
  • Azdast, T. Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
  • Azhar, F. H Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
  • Azhar, F. H The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
  • Azhari, M. Elastic Initial and Post-local Buckling of Profiled through Girders [Volume 12, Issue 1, 1999, Pages 1-12]
  • Azhari, S. J . A Novel Data Compression Technique for 420 Ma Current Loop Transmitters [Volume 14, Issue 1, 2001, Pages 35-40]
  • Azhdari, K. Magnetic and Electerical Resistivity Behavior of Amorphous Ni Co P Films [Volume 10, Issue 2, 1997, Pages 85-90]
  • Azhdari Moghaddam, M. Analysis and Design of a Simple Surge Tank (RESEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 339-345]
  • Azid, Ishak Abd House of Improvement Model to Enhance Prioritisation of Solutions in Decision Making: a Case Study [Volume 27, Issue 8, 2014, Pages 1195-1204]
  • Azimi, E. Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
  • Azimi, Hamed Numerical Analysis of Sediment Transport in Sewer Pipe [Volume 28, Issue 11, 2015, Pages 1564-1570]
  • Azimi, Y Fuzzy Wastewater Quality Index Determination for Environmental Quality Assessment under Uncertain and Vagueness Conditions [Volume 31, Issue 8, 2018, Pages 1196-1204]
  • Azimi, Y Prediction of Seismic Wave Intensity Generated by Bench Blasting Using Intelligence Committee Machines [Volume 32, Issue 4, 2019, Pages 617-627]
  • Azimi, Y. Determining the Optimal Maintenance Strategy for Ammonium Hydroxide ‎Production Unit Using Risk-Based Inspection ‎and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
  • Azimian, A. R. Turbulent Flow over Cars [Volume 11, Issue 3, 1998, Pages 157-166]
  • Azimian, A. R. Flow Analysis Heat and Mass Transfer in a Room [Volume 12, Issue 3, 1999, Pages 165-178]
  • Azimian, A. R. Calculation of Complicated Flows, Using First and Second-Order Schemes (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 269-278]
  • Azimirad, V. Investigation on the Effect of Different Parameters in Wheeled Mobile Robot Error (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 195-210]
  • Azimirad, V. An Intelligent Vision System on a Mobile Manipulator [Volume 21, Issue 3, 2008, Pages 279-294]
  • Aziz, F Performance Evaluation of Hybrid Coagulation/Nanofiltration Process for AT-POME Treatment [Volume 31, Issue 8, 2018, Pages 1430-1436]
  • Aziz, H. A. Removal of Coliform, Suspended Solids, UV254 and Colour Using Zeolite and Activated Carbon in Riverbank Filtration System [Volume 33, Issue 5, 2020, Pages 732-736]
  • Azizan, A. Microbial Desulfurization of Malaysian Coal in Batch Process using Mixed Culture (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 227-234]
  • Azizi, Abbas Removal of Strontium Ions by Synthetic Nano Sodalite Zeolite from Aqueous Solution [Volume 29, Issue 2, 2016, Pages 160-169]
  • Azizi, Jaber Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]
  • Azizi, Jamal Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]
  • Azizi, K. Computational Fluid Dynamic- Two Fluid Model Study of Gas-Solid Heat Transfer in a Riser with Various Inclination Angles [Volume 30, Issue 4, 2017, Pages 464-472]
  • Azizi, M. J. Time Series Forecasting of Bitcoin Price Based on Autoregressive Integrated Moving Average and Machine Learning Approaches [Volume 33, Issue 7, 2020, Pages 1293-1303]
  • Azizi, Mohammad Kinetic Study of Niobium Carbide Coating Formation on AISI L2 Steel using Thermo-Reactive Deposition Technique [Volume 23, Issue 1, 2010, Pages 77-86]
  • Azizi, S Quality Factor of Free In-plane Vibration of a Fully Clamped Rectangular Micro-plate [Volume 31, Issue 1, 2018, Pages 96-103]
  • Azizi, Shohreh A Optimization of biodiesel production from sunflower oil transesterification using Ca-K/Al2O3 nanocatalysts [Volume 35, Issue 2, 2022]
  • Azizi, Vahid Lot Streaming in No-wait Multi Product Flowshop Considering Sequence Dependent Setup Times and Position Based Learning Factors [Volume 28, Issue 7, 2015, Pages 1031-1039]
  • Azizi, Y. A New Uniformly Ultimate Boundedness Criterion for Temperature Dependent Average Bristle Deflections [Volume 33, Issue 6, 2020, Pages 1128-1133]
  • Azizian, D. Mitigation Transformer Inrush Current Using Modified Transient Current Limiter [Volume 32, Issue 5, 2019, Pages 701-709]
  • Azizian, D. Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
  • Azizian, H. The Comparison of Punching Shear Capacity in Solid and Void Two-Way Slabs on Soil Substrate in Relation to Spring Stiffness Changes [Volume 33, Issue 10, 2020, Pages 1872-1885]
  • Azizifard, A. Sustainable Surface Water Management and Wastewater Treatment Plant Location: A Case Study of Urmia Lake [Volume 33, Issue 4, 2020, Pages 621-630]
  • Azizmohammadi, Roozbeh Solving a Redundancy Allocation Problem by a Hybrid Multi-objective Imperialist Competitive Algorithm [Volume 26, Issue 9, 2013, Pages 1031-1042]
  • Azizollah Ganji, B. The Effect of Material Properties on Sensitivity of the Microelectromechanical Systems Piezoelectric Hydrophone [Volume 30, Issue 12, 2017, Pages 1848-1855]
  • Azizollah Ganji, B. A Novel Metamaterial Microelectromechanical Systems Phase Shifter with High Phase Shift and High Bandwidth [Volume 32, Issue 8, 2019, Pages 1163-1168]
  • Azizollah Ganji, bahram Simulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm [Volume 30, Issue 6, 2017, Pages 846-850]
  • Azizpour, A. Probability Approach for Prediction of Pitting Corrosion Fatigue Life of Custom 450 Steel [Volume 31, Issue 10, 2018, Pages 1773-1781]
  • Azizuddin, Md. Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant [Volume 30, Issue 4, 2017, Pages 558-566]
  • Azizyan, G. Experimental Modeling and Evaluation Sediment Scouring in Riverbeds around Downstream in Flip Buckets [Volume 33, Issue 10, 2020, Pages 1904-1916]
  • Az-Zahra, N. Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]

B

  • Babaee Darband, Jaber An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
  • Babaei, M. Scheduling Nurse Shifts Using Goal Programming Based on Nurse Preferences: A Case Study in an Emergency Department [Volume 32, Issue 7, 2019, Pages 954-963]
  • Babaei, Masome Sadat Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]
  • Babaei, Mehdi Novel Amine Modified Nanoporous SBA-15 Sorbent for the Removal of H2S from Gas Streams in the Presence of CH4 (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1697-1704]
  • Babaei, R. Research and Assessment of Applying Dimethyl Ether “DME” Extracted from Natural Gas “Ng”, on Diesel Engine as a Clean Fuel (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 193-201]
  • Babaeimorad, S. A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
  • Babagoli, M. A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
  • Babaheydari, R M Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
  • Babaheydari, R. M. Investigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying [Volume 33, Issue 9, 2020, Pages 1759-1765]
  • Babai, H Process Optimization of Deposition Conditions for Low Temperature Thin Film Insulators used in Thin Film Transistors Displays [Volume 31, Issue 5, 2018, Pages 712-718]
  • Babaie, M. A Radon-based Convolutional Neural Network for Medical Image Retrieval [Volume 31, Issue 6, 2018, Pages 910-915]
  • Babakoohi, S. The Analysis of Longitudinal Shrinkage in Butt Weld Joint (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 197-202]
  • Babayan, M.T. Computer Simulation of Hydrodynamic Behavior of Aggregative Fluidized Beds [Volume 2, Issue 1, 1989, Pages 55-64]
  • Babazadeh, Saeedeh Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
  • Babenko, V. Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
  • Babenko, V. Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
  • Baboli, Armand Comparing Three Proposed Meta-heuristics to Solve a New p-hub Location-allocation Problem [Volume 26, Issue 9, 2013, Pages 1043-1058]
  • BABU, SAMUEL A Closed Loop Control of Quadratic Boost Converter Using PID Controller [Volume 27, Issue 11, 2014, Pages 1653-1662]
  • Babulu, K Low Power March Memory Test Algorithm for Static Random Access Memories (TECHNICAL NOTE) [Volume 31, Issue 2, 2018, Pages 292-298]
  • Babyr, N. V. System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
  • Badaghei, R. Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
  • Badakhshan, Ehsan Effect of zeolite replacement on the behavior of sandy clay soils contaminated with zinc nitrate [(Articles in Press)]
  • Badal, T. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
  • Badie, Kambiz A Context-aware Architecture for Mental Model Sharing through Semantic Movement in Intelligent Agents [Volume 25, Issue 3, 2012, Pages 233-248]
  • Badiei, Elaheh Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
  • Badjian, Hamed Multi-objective Optimization of Stirling Heat Engine Using Gray Wolf Optimization Algorithm (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 895-903]
  • Badri, Seyed Amin A Mathematical Method for Managing the System Constraint [Volume 24, Issue 1, 2011, Pages 37-47]
  • Baghaeinejad, M A Novel Method for Modeling and Simulation of Asymmetrical Impedance-source Converters [Volume 31, Issue 5, 2018, Pages 741-751]
  • Baghel, K. P. S. Performance Prediction of a Flexible Manufacturing System [Volume 15, Issue 4, 2002, Pages 355-364]
  • Baghel, K. P. S. Performance Modeling of Machining System with Mixed Standby Components Balking and Reneging [Volume 17, Issue 2, 2004, Pages 169-180]
  • Baghel, K. P. S. N-Policy for M/G/1 Machine Repair Model with Mixed Standby Components, Degraded Failure and Bernoulli Feedback [Volume 17, Issue 3, 2004, Pages 279-288]
  • Baghel, K. P. S. Diffusion Process for GGR Machining System with Spares, Balking and Reneging (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 49-54]
  • Bagheri, Ahmad GMDH Type Neural Networks and Their Application to the Identification of the Inverse Kinematics Equations of Robotic Manipulators (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 135-143]
  • Bagheri, Ahmad Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
  • Bagheri, Ahmad Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]
  • Bagheri, Ahmad Multi-Objective Optimization of Solar Thermal Energy Storage Using Hybrid of Particle Swarm Optimization and Multiple Crossover and Mutation Operator [Volume 24, Issue 4, 2011, Pages 367-376]
  • Bagheri, Ahmad Receding Horizon Based Control of Disturbed Upright Balance with Consideration of Foot Tilting(RESEARCH NOTE) [Volume 26, Issue 10, 2013, Pages 1243-1254]
  • Bagheri, Ahmad Meshless Local Petrov-Galerkin Method for Elasto-Static Analysis of Thick-Walled Isotropic Laminated Cylinders [Volume 27, Issue 11, 2014, Pages 1731-1740]
  • Bagheri, F. Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
  • Bagheri, Faezeh Robust Design of Dynamic Cell Formation Problem Considering the Workers Interest [Volume 32, Issue 12, 2019, Pages 1790-1797]
  • Bagheri, M. Evaluation of Seismic Response of Concrete Structures Reinforced by Shape Memory Alloys (Technical Note) [Volume 33, Issue 3, 2020, Pages 410-418]
  • Bagheri, Masoud A two Stage Heuristic Solution Approach for Resource Assignment during a Cell Formation Problem [Volume 26, Issue 9, 2013, Pages 943-954]
  • Bagheri, Mohammad Hadi Micro Particles Transport and Deposition in Realistic Geometry of Human Upper Airways [Volume 25, Issue 4, 2012, Pages 315-322]
  • Bagheri, Mozhgan Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
  • Bagheri, N. EFFECT OF Si ANTIOXIDANT ON THE RATE OF OXIDATION OF CARBON IN MgO- C REFRACTORY [Volume 24, Issue 4, 2011, Pages 357-366]
  • Bagheri, Reza Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 93-100]
  • Bagheri-Esfe, H A Low Cost Numerical Simulation of a Supersonic Wind-tunnel Design [Volume 31, Issue 1, 2018, Pages 128-135]
  • Bagherifard, M. Application of Incomplete Analytic Hierarchy Process and Choquet Integral to Select the best Supplier and Order Allocation in Petroleum Industry [Volume 33, Issue 11, 2020, Pages 2299-2309]
  • Bagheri Hosseinabadi, M. Control of Electric Wheelchair Suspension System based on Biodynamic Response of Seated Human Body [Volume 33, Issue 8, 2020, Pages 1629-1636]
  • Bagheripour, E. Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance [Volume 31, Issue 10, 2018, Pages 1609-1616]
  • Bagheripour, Ehsan Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
  • Bagheripour, Ehsan Incorporated Poly Acrylic Acid-co-Fe3O4 Nanoparticles Mixed Matrix Polyethersulfone based Nanofiltration Membrane in Desalination Process [Volume 30, Issue 6, 2017, Pages 821-829]
  • Bagheripour, M.H. Two and Three-Dimensional Seepage Analysis of Earth Dams Considering Horizontal Filter Blanket Effects (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 187-195]
  • Bagheri Sharebabaki, F. Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
  • Bagherzadeh, E. Oxidative Coupling of Methane to Ethylene Over Sodium Promoted Manganese Oxide [Volume 3, Issue 3, 1990, Pages 104-111]
  • Bagherzadeh, M. An Upper Bound Approach for Analysis of Hydroforming of Sheet Metals [Volume 17, Issue 4, 2004, Pages 389-398]
  • Baghmolaei, M.M. Operation Analysis of Rotary Tools of Compressor Station Using Exergy Approach [Volume 27, Issue 12, 2014, Pages 1815-1822]
  • Bahadornejad, Momen A New Adaptive Load-Shedding and Restoration Strategy for Autonomous Operation of Microgrids: A Real-Time Study [Volume 33, Issue 1, 2020, Pages 82-91]
  • Bahar, F. An Improved Modular Modeling for Analysis of Closed-Cycle Absorption Cooling Systems [Volume 21, Issue 1, 2008, Pages 57-70]
  • Bahar, H. B. Engineering Application Of Correlation on Ann Estimated Mass [Volume 15, Issue 2, 2002, Pages 157-166]
  • Baharmast, Ashkan Evaluation of Column-Tree Moment Resisting Connection with End Plates and Haunched Beam (RESEARCH NOTE) [Volume 28, Issue 12, 2015, Pages 1702-1710]
  • Baharmast, Hessam Approximate Incremental Dynamic Analysis Using Reduction of Ground Motion Records [Volume 28, Issue 2, 2015, Pages 190-197]
  • Baharom, A. Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
  • Baharvandi, Hamid reza Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
  • Baheri Islami, S. Transonic Turbulent Flow Simulation using Pressure-Based Method and Normalized Variable Diagram [Volume 17, Issue 3, 2004, Pages 299-310]
  • Baheta, Aklilu Heat Transfer Coefficients Investigation for TiO2 Based Nanofluids [Volume 32, Issue 10, 2019, Pages 1491-1496]
  • Bahi, Lahcen Shrinkage Curve: Experimental Study and Modelling [Volume 25, Issue 3, 2012, Pages 203-210]
  • Bahjat, S. Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
  • Bahoosh-Kazerooni, R. A “v2-f Based” Macroscopic K-Ε Model for Turbulent Flow through Porous Media [Volume 21, Issue 2, 2008, Pages 195-212]
  • Bahraini, Sina Inverse Boundary Design Problem of Combined Radiation-convection Heat Transfer in Laminar Recess Flow [Volume 29, Issue 3, 2016, Pages 394-402]
  • Bahrami, L. Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
  • Bahrami, M. Optimal Sliding-Mode Guidance Law for Fixed-Interval Propulsive Maneuvers [Volume 21, Issue 2, 2008, Pages 105-112]
  • Bahrami, M. Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
  • Bahrami, N. Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
  • Bahrebar, M. Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
  • Bahreva, M. A. Role of Calcium Content in Dissolution Kinetics of Iranian Borate Minerals in Sulfuric Acid [Volume 16, Issue 3, 2003, Pages 293-300]
  • Bahrevar, Mohammad-Ali Electrophoretic Synthesis of Titanium Oxide Nanotubes [Volume 25, Issue 4, 2012, Pages 343-350]
  • Bahrevar, Mohammad-Ali Ethanol-based Tape Casting Process of the Textured Bi0.5(Na0.80K0.20)0.5TiO3-BiFeO3 Ceramics [Volume 28, Issue 4, 2015, Pages 561-566]
  • Bai, L. Single Image Dehazing Algorithm Based on Dark Channel Prior and Inverse Image [Volume 30, Issue 10, 2017, Pages 1471-1478]
  • Bailin, FAN Research on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink [Volume 28, Issue 4, 2015, Pages 627-633]
  • Bakar, W. A. W. A Biodiesel Production via Transesterification of Low Grade Cooking Oil over Heterostructure Nano Particles of Ni/Mg/Al2O3 Catalyst [Volume 31, Issue 8, 2018, Pages 1318-1325]
  • Bakeri, N. A Inhibitory Effects of Swietenia Mahagoni Seeds Extract on Α-Glucosidase and Α-amylase [Volume 31, Issue 8, 2018, Pages 1308-1317]
  • Bakhshan, Y. Estimating Solar Radiation and Developing Iran’s Atlas Map of Optimum Monthly Tilt Angle (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1197-1204]
  • Bakhshan, Y. The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux [Volume 33, Issue 8, 2020, Pages 1590-1597]
  • Bakhshan, Y. Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
  • Bakhshandeh, Mohammad Reza Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
  • Bakhshandeh Amnieh, H. A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
  • Bakhshi, H Using the Genetic Algorithm based on the Riedel Equation to Predict the Vapor Pressure of Organic Compounds [Volume 31, Issue 6, 2018, Pages 863-869]
  • Bakhshi, H. R. A New Algorithm for the Deinterleaving of Radar Pulses [Volume 10, Issue 3, 1997, Pages 143-152]
  • Bakhshi, saeed reza Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
  • Bakhshi, Z. Phenol Biodegradation Kinetics in the Presence of Supplimentary Substrate [Volume 25, Issue 3, 2012, Pages 181-192]
  • Bakhshi-Jooybari, M. Improvement of Die Corner Filling of Stepped Tubes Using Warm Hybrid Forming [Volume 32, Issue 4, 2019, Pages 587-595]
  • Bakhshi-Jooybari, M. Investigation on Formability of Tailor-Welded Blanks in Incremental Forming [Volume 33, Issue 5, 2020, Pages 906-915]
  • Bakhshi Khaniki, Hessam Free Vibration Analysis of Functionally Graded Materials Non-uniform Beams [Volume 29, Issue 12, 2016, Pages 1734-1740]
  • Bakhshi Khaniki, Hossein Analytical Solution for Free Vibration of a Variable Cross-Section Nonlocal Nanobeam [Volume 29, Issue 5, 2016, Pages 688-696]
  • Bakhshi Khaniki, Hossein Free Vibration Analysis of Functionally Graded Materials Non-uniform Beams [Volume 29, Issue 12, 2016, Pages 1734-1740]
  • Bakhshi Khaniki, Hossein Free Vibration Analysis of Nonuniform Microbeams Based on Modified Couple Stress Theory: an Analytical Solution [Volume 30, Issue 2, 2017, Pages 311-320]
  • Bakhti, I. Improvement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC [Volume 31, Issue 10, 2018, Pages 1689-1697]
  • Bakhtiari, Leila Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
  • Bakhtiari Nejad, F. Air-Fuel Ratio Control of a Lean Burn SI Engine Using Fuzzy Self Tuning Method [Volume 13, Issue 2, 2000, Pages 45-54]
  • Bakhtiari-Nejad, F. Analysis of Natural Frequencies for a Laminated Composite Plate with Piezoelectric Patches using the First and Second Eigenvalue Derivatives [Volume 21, Issue 1, 2008, Pages 85-96]
  • Balali, S. A Stochastic Model for Indirect Condition Monitoring Using Proportional Covariate Model [Volume 21, Issue 1, 2008, Pages 45-56]
  • Balamurali, K. Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
  • Balasubramanian, Kannan Starvation Free Scheduler for Buffered Crossbar Switches (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 523-528]
  • Baleghi, Y. Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
  • Baleghi Damavandi, Y. Plant Classification in Images of Natural Scenes Using Segmentations Fusion [Volume 33, Issue 9, 2020, Pages 1743-1750]
  • Baleghi Damavandi, Yasser On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]
  • Baleghi Damavandi, Yasser A Comparative Study of VHDL Implementation of FT-2D-cGA and FT-3D-cGA on Different Benchmarks (RESEARCH NOTE) [Volume 28, Issue 9, 2015, Pages 1276-1285]
  • Ball, Kenneth S. Turbulent Drag Reduction by Spanwise Wall Oscillations [Volume 21, Issue 1, 2008, Pages 85-104]
  • Balogun, V. A Energy Efficiency Analyses of Toolpaths in a Pocket Milling Process [Volume 31, Issue 5, 2018, Pages 847-855]
  • Balogun, Vincent Electrical Energy Demand Modeling of 3D Printing Technology for Sustainable Manufacture [Volume 29, Issue 7, 2016, Pages 954-961]
  • Balogun, Vincent A. Optimum Swept Angle Estimation based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy [Volume 30, Issue 4, 2017, Pages 591-596]
  • Baloni, J. Mathematical Modeling for Homogeneous Tumor with Delay in Time [Volume 22, Issue 1, 2009, Pages 49-56]
  • Bambaeechee, Mohsen Static and dynamic nonlinear analysis of steel frame with semi-rigid connections [Volume 24, Issue 3, 2011, Pages 203-222]
  • Bamdad, S. Designing a Sustainable Reverse Logistics Network Considering the Conditional Value at Risk and Uncertainty of Demand under Different Quality and Market Scenarios [Volume 33, Issue 11, 2020, Pages 2252-2271]
  • Bameni Moghadam, Mohammad Application of a Cost-Driven Optimization Method in Beer Brewing Process [Volume 17, Issue 1, 2004, Pages 59-70]
  • Banaei, Farid Dynamic Performance Analysis and Simulation of a Full Scale Activated Sludge System Treating an Industrial Wastewater Using Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 465-472]
  • Banai, A. Adaptive Unstructured Grid Generation Scheme for Solution of the Heat Equation [Volume 13, Issue 4, 2000, Pages 43-54]
  • Band Band, H. Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
  • Banejad, M. A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
  • Baniamerian, Z A 3D Numerical and Empirical Study on the Effects of Injection Pressure and Temperature on the Quality of Produced Mold [Volume 31, Issue 3, 2018, Pages 487-494]
  • Baniamerian, Z. A New Approach in Developing Optimal Defrost/Demist Performance in a Passenger Car (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1081-1089]
  • Baniamerian, Zahra Simulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1928-1935]
  • Baniamerian, Zahra A Numerical Investigation on Aerodynamic Coefficients of Solar Troughs Considering Terrain Effects and Vortex Shedding [Volume 28, Issue 6, 2015, Pages 940-948]
  • Bani Mostafa Arab, N. The Effect of Rapid Deformation Process to Improve Creep and Tensile Resistance of AZ91 Magnesium Alloy Plates [Volume 33, Issue 10, 2020, Pages 2039-2046]
  • Bani Mostafa Arab, Nasrollah Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
  • Bani Mostafa Arab, Nasrollah Investigation on Tensile Strength of Friction Stir Welded Joints in PP/EPDM/Clay Nanocomposites [Volume 28, Issue 9, 2015, Pages 1382-1391]
  • Bani Rostam, T. Experimental Analysis for Measuring Errors in Wheeled Mobile Robots (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 115-133]
  • Banks, S. P. On the Approximation of Pseudo Linear Systems by Linear Time Varying Systems (RESEARCH NOTE) [Volume 17, Issue 1, 2004, Pages 29-32]
  • Bannae Sharifian, M. B. Novel Unified Control Method of Induction and Permanent Magnet Synchronous Motors [Volume 32, Issue 2, 2019, Pages 256-269]
  • Bao, LP. Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]
  • Baoyi, Chen EXPERIMENT AND APPLICATION OF AN ANNULAR FOAM BREAKER FOR FOAM DRILLING FLUID (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 73-80]
  • Baradaran, Gholam hosein Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
  • Baradaran, Gholamhosein Element Free Galerkin Method for Static Analysis of Thin Micro/Nanoscale Plates Based on the Nonlocal Plate Theory [Volume 26, Issue 7, 2013, Pages 795-806]
  • Baradaran, Gholam Hossein Meshless Local Petrov-Galerkin Method for Elasto-Static Analysis of Thick-Walled Isotropic Laminated Cylinders [Volume 27, Issue 11, 2014, Pages 1731-1740]
  • Baradaran Rahimi, A. Freezing in a Finite Slab Using Extensive Perturbation Expansions Method [Volume 9, Issue 2, 1996, Pages 29-35]
  • Baradaran Rahimi, A. Pressure Calculation in the Flow Between Two Rotating Eccentric Cylinders at High Renolds Numbers [Volume 9, Issue 4, 1996, Pages 201-210]
  • Baradaran Rahimi, A. Analytic Solution for Hypersonic Flow Past a Slender Elliptic Cone Using Second-Order Perturbation Approximations [Volume 13, Issue 4, 2000, Pages 23-34]
  • Baradaran Rahimi, A. Transient Natural Convection Flow on an Isothermal Vertical Wall at High Prandtl Numbers: Second-Order Approximation [Volume 14, Issue 4, 2001, Pages 367-376]
  • Baradaran Rahimi, A. A New Approach in Preliminary Design of Closed Loop Solar Thermal Systems (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 383-390]
  • Baradaran Rahimi, A. Unsteady Free Convection from a Sphere in a Porous Medium with Variable Surface Temperature [Volume 18, Issue 4, 2005, Pages 331-350]
  • Baradaran Rahimi, A. Axi-symmetric Stagnation–Point Flow and Heat Transfer Obliquely Impinging on a Rotating Circular Cylinder [Volume 20, Issue 1, 2007, Pages 67-82]
  • Baradaran Rahimi, A. A Numerical Study of Flow and Heat Transfer Between Two Rotating Vertically Eccentric Spheres with Time- Dependent Angular Velocities [Volume 21, Issue 3, 2008, Pages 295-318]
  • Baradaran Rahimi, A. NUMERICAL MODELING OF CHARRING MATERIAL ABLATION WITH CONSIDERING CHEMICAL REACTION, MASS TRANSFER AND SURFACE HEAT TRANSFER EFFECTS [Volume 25, Issue 1, 2012, Pages 57-64]
  • Baradaran Rahimi, A. Comparison of Lift and Drag Forces for Some Conical Bodies in Supersonic Flow Using Perturbation Techniques [Volume 25, Issue 3, 2012, Pages 231-238]
  • Baradaran Rahimi, A. Estimation of the Strength of the Time-dependent Heat Source using Temperature Distribution at a Point in a Three Layer System [Volume 25, Issue 4, 2012, Pages 389-398]
  • Barahmand, N. Hybrid Artificial Intelligence Model Development for Roller-compacted Concrete Compressive Strength Estimation [Volume 33, Issue 10, 2020, Pages 1852-1863]
  • Barati, A. Generation Process and Performance Evaluation of Engineered Microsphere Agarose Adsorbent for Application in Fluidized-bed Systems [Volume 33, Issue 8, 2020, Pages 1450-1458]
  • Barati, Mahmoud The Effect of Normal Anisotropy on Thin-Walled Tube Bending [Volume 26, Issue 1, 2013, Pages 83-90]
  • Barati, Sara Simulation of Convective Heat Transfer of a Nanofluid in a Circular Cross-section [Volume 26, Issue 6, 2013, Pages 571-576]
  • Barazandeh, A. Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
  • Barforoshi, T Distributed Generation Expansion Planning Considering Load Growth Uncertainty: A Novel Multi-Period Stochastic Model [Volume 31, Issue 3, 2018, Pages 405-414]
  • Barforoushi, T. Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
  • Bargegol, I. Relationship between Pedestrians’ Speed, Density and Flow Rate of Crossings through Urban Intersections (Case Study: Rasht Metropolis) (RESEARCH NOTE) [Volume 30, Issue 12, 2017, Pages 1814-1821]
  • Bargegol, I. Statistical Analysis of the Railway Accidents Causes in Iran (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1822-1830]
  • Barkhordari, M. S. Ranking Passive Seismic Control Systems by Their Effectiveness in Reducing Responses of High-Rise Buildings with Concrete Shear Walls Using Multiple-Criteria Decision Making [Volume 33, Issue 8, 2020, Pages 1479-1490]
  • Barkhordari, M.S. Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
  • Barnabas, Kingston Optimization of Minimum Quantity Liquid Parameters in Turning for the Minimization of Cutting Zone Temperature [Volume 25, Issue 4, 2012, Pages 327-340]
  • Barrios, A. M. Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
  • Barton, A. P. Electrochemical Noise Analysis of Anaerobic (Bacterial) Corrosion of Steel [Volume 4, Issue 1, 1991, Pages 53-64]
  • Barzegar, B. A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
  • Barzegar, Ramin Three Dimensional Modeling of Combustion Process and Emissions Formationin Pre and Main Chambers of an Idirect Injection Diesel Enginge [Volume 25, Issue 4, 2012, Pages 311-320]
  • Barzegar-Mohammadi, M. A New Mathematical Model To Optimize A Green Gas Network: A Case Study [Volume 30, Issue 7, 2017, Pages 1029-1037]
  • Barzegar Nozari, R. A Novel Trust Computation Method Based on User Ratings to Improve the Recommendation [Volume 33, Issue 3, 2020, Pages 377-386]
  • Barzinpour, F A Multi-objective Hierarchical Location-allocation Model for the Healthcare Network Design Considering a Referral System [Volume 31, Issue 2, 2018, Pages 365-373]
  • Baseri, Hamid Nusselt Number Estimation along a Wavy Wall in an Inclined Lid-driven Cavity using Adaptive Neuro-Fuzzy Inference System (ANFIS) [Volume 26, Issue 4, 2013, Pages 383-392]
  • Bashiri, M. Re-configuration of the Relief Network Considering Uncertain Demand and Link Failure in an Earthquake: A Multi-stage Stochastic Programming [Volume 31, Issue 6, 2018, Pages 932-942]
  • Bashiri, M. A Multi-district Asset Protection Problem with Time Windows for Disaster Management [Volume 31, Issue 11, 2018, Pages 1929-1934]
  • Bashiri, M. Multi-commodity Multimodal Splittable Logistics Hub Location Problem with Stochastic Demands [Volume 31, Issue 11, 2018, Pages 1935-1942]
  • Bashiri, M. A Lagrangian Decomposition Algorithm for Robust Green Transportation Location Problem [Volume 32, Issue 1, 2019, Pages 85-91]
  • Bashiri, Mahdi A Clustering Based Location-allocation Problem Considering Transportation Costs and Statistical Properties (RESEARCH NOTE) [Volume 26, Issue 6, 2013, Pages 597-604]
  • Bashiri, Mahdi Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis [Volume 26, Issue 6, 2013, Pages 621-630]
  • Bashiri, Mahdi A two Stage Heuristic Solution Approach for Resource Assignment during a Cell Formation Problem [Volume 26, Issue 9, 2013, Pages 943-954]
  • Bashiri, Mahdi Capacitated Multimodal Structure of a Green Supply Chain Network Considering Multiple Objectives [Volume 26, Issue 9, 2013, Pages 963-974]
  • Bashiri, Mahdi Multi-criteria Logistic Hub Location by Network Segmentation under Criteria Weights Uncertainty (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1205-1214]
  • Bashiri, Mahdi A Reliable Multi-objective p-hub Covering Location Problem Considering of Hubs Capabilities [Volume 28, Issue 5, 2015, Pages 717-729]
  • Bashiri, Mahdi Capacitated Single Allocation P-Hub Covering Problem in Multi-modal Network Using Tabu Search [Volume 29, Issue 6, 2016, Pages 797-808]
  • Bashiri, Mahdi Bi-objectives Approach for a Multi-period Two Echelons Perishable Product Inventory-routing Problem with Production and Lateral Transshipment [Volume 30, Issue 6, 2017, Pages 876-886]
  • Basirat, R. The Investigation of Subsidence Effect on Buried Pipes in 3D Space [Volume 30, Issue 8, 2017, Pages 1182-1189]
  • Basirat Tabrizi, H. Performance of Rotating Solar Still with Rotating External Reflectors (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 884-892]
  • Basirat Tabrizi, H. Experimental Investigation of Sinusoidal Tube in Triplex-Tube Heat Exchanger during Charging and Discharging Processes Using Phase Change Materials [Volume 32, Issue 7, 2019, Pages 999-1009]
  • Basirat Tabrizi, Hassan Numerical Study of Water-Air Ejector Using Mixture and Two-Phase Models [Volume 35, Issue 2, 2022]
  • Basirat Tabrizi, Hassan Numerical study of the steps height and glass cover angle effect on the heat transfer performance for solar distillation [Volume 35, Issue 1, 2022]
  • Basiri, Hassan Hexadecyl Trimethyl Ammonium Bromide-Modified Montmorillonite as a Low-Cost Sorbent for the Removal of Methyl Red from Liquid-Medium [Volume 29, Issue 1, 2016, Pages 60-67]
  • Basiri, Mohammad Hosein Reliability and Risk Assessment of Electric Cable Shovel at Chadormalu Iron Ore Mine in Iran [Volume 33, Issue 1, 2020, Pages 170-177]
  • Basir Jafari, S. Acousto-Refrigerator with an Adjustable Mechanical Resonator (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 183-196]
  • Basir Jafari, S. Validation of Shell Theory for Modeling the Radial Breathing Mode of a Single-Walled Carbon Nanotube (RESEARCH NOTE) [Volume 26, Issue 4, 2013, Pages 447-454]
  • Basnet, Ritu Finite Capacity Queuing System with Vacations and Server Breakdowns [Volume 24, Issue 4, 2011, Pages 387-394]
  • Basri, H Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
  • Bassiri, M.H. Experiments To Determine The Simulated Annealing Parameters Case Study In VRP [Volume 17, Issue 1, 2004, Pages 71-80]
  • Bastani, D. Reducing the Limitation on Application of Synchronous Decorrelating Detector Cdma Systems [Volume 14, Issue 2, 2001, Pages 107-112]
  • Bastani, D. Stagewise Modeling of Liquid-Liquid Extraction Column (RDC) [Volume 17, Issue 1, 2004, Pages 7-17]
  • Basti, Ali Simulation of Cold Rolling Process Using Smoothed Particle Hydrodynamics (SPH) [Volume 26, Issue 5, 2013, Pages 515-522]
  • Basu, A. Optimal Load of Flexible Joint Mobile Robots Stability Approach [Volume 17, Issue 2, 2004, Pages 193-204]
  • Basu, R. Bioreactor Scale-up for Water-Gas Shift Reaction [Volume 9, Issue 3, 1996, Pages 121-129]
  • Basu, S. K. Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
  • Bäßler, R. Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis [Volume 32, Issue 7, 2019, Pages 982-990]
  • Bayani, Rasoul Experimental Evaluation of IRWEC1, a Novel Offshore Wave Energy Converter [Volume 29, Issue 9, 2016, Pages 1292-1299]
  • Bayat, H A Prioritization Model for HSE Risk Assessment Using Combined Failure Mode, Effect Analysis, and Fuzzy Inference System: A Case Study in Iranian Construction Industry [Volume 31, Issue 9, 2018, Pages 1487-1497]
  • Bayati, Nasrin Pattern Recognition in Control Chart Using Neural Network based on a New Statistical Feature [Volume 30, Issue 9, 2017, Pages 1372-1380]
  • Bayee, P. Experimental Investigations on Behaviour of Rhamnolipid Biosurfactant as a Green Stabilizer for the Biological Synthesis of Gold Nanoparticles [Volume 33, Issue 6, 2020, Pages 1054-1060]
  • Baygan, Majid More about Thermosyphone Rankine Cycle Performance Enhancement (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 642-647]
  • Bazoobandi, H. Wavelet Neural Network with Random Wavelet Function Parameters [Volume 30, Issue 10, 2017, Pages 1510-1516]
  • Bazoobandi, Hojjat Allah A Differential Evolution and Spatial Distribution based Local Search for Training Fuzzy Wavelet Neural Network [Volume 27, Issue 8, 2014, Pages 1185-1194]
  • Bazzazi, A. An Effective Model for SMS Spam Detection Using Content-based Features and Averaged Neural Network [Volume 33, Issue 2, 2020, Pages 221-228]
  • Bazzazi, M. Multi-Objective Unrelated Parallel Machines Scheduling with Sequence-Dependent Setup Times and Precedence Constraints [Volume 21, Issue 3, 2008, Pages 269-278]
  • Beatrice Seventline, J. Estimation of Roughness Parameters of A Surface Using Different Image Enhancement Techniques (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 652-658]
  • Beddar, M. Optimizing of Steel Fiber Reinforced Concrete Mix Design [Volume 17, Issue 1, 2004, Pages 41-50]
  • Behbahani, H. Control of Engineering Properties of Asphalt Concrete Based on Permanent Deformation Constraint of Subgrade at Tropical Zones in Iran (TECHNICAL NOTE) [Volume 14, Issue 3, 2001, Pages 195-200]
  • Behbahani, H. Prediction of The Pavement Condition For Urban Roadway A Tehran Case Study (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 219-226]
  • Beheshti, H. Performance Enhancement and Environmental Impact Analysis of a Solar Chimney Power Plant: Twenty-four-hour Simulation in Climate Condition of Isfahan Province, Iran [Volume 30, Issue 8, 2017, Pages 1260-1269]
  • Beheshti, Hamid Numerical and Analytical Investigation in Radiated Noise by a Shock-Absorber [Volume 26, Issue 12, 2013, Pages 1525-1534]
  • Beheshty, M.H. A Numerical Method for the Determination of an Effective Modules for Coated Glass Fibers Used in Phenolic Composites [Volume 13, Issue 3, 2000, Pages 1-10]
  • Behfar, R. Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
  • Behfar, Rezvan Pharmaceutical Wastewater Chemical Oxygen Demand Reduction: Electro-Fenton, UV-enhanced Electro-Fenton and Activated Sludge [Volume 32, Issue 12, 2019, Pages 1710-1715]
  • Behjat, S. Quay Cranes and Yard Trucks Scheduling Problem at Container Terminals [Volume 33, Issue 9, 2020, Pages 1751-1758]
  • Behjat, Saeed A Mathematical Model and Grouping Imperialist Competitive Algorithm for Integrated Quay Crane and Yard Truck Scheduling Problem with Non-crossing Constraint [Volume 32, Issue 10, 2019, Pages 1464-1479]
  • Behnam, K. Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses [Volume 28, Issue 9, 2015, Pages 1368-1374]
  • Behnamfar, F A Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls [Volume 31, Issue 2, 2018, Pages 220-227]
  • Behnamfar, F. Seismic Design of Steel Structures Based on Ductility and Incremental Nonlinear Dynamic Analysis [Volume 29, Issue 1, 2016, Pages 23-30]
  • Behnamfar, F. Analysis of Structural Vibrations due to Passage of Underground Trains [Volume 29, Issue 6, 2016, Pages 742-751]
  • Behnamfar, F. A Fire Ignition Model and Its Application for Estimating Loss due to Damage of the Urban Gas Network in an Earthquake [Volume 29, Issue 11, 2016, Pages 1507-1519]
  • Behnamfar, F. Soft Soil Seismic Design Spectra Including Soil-structure Interaction [Volume 30, Issue 10, 2017, Pages 1443-1450]
  • Behnamfar, F. Response Spectra of Structures under Subway Induced Vibrations [Volume 31, Issue 12, 2018, Pages 2009-2015]
  • Behrad Vakylabad, A. Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
  • Behravesh, A. Optimum Flat Grids [Volume 3, Issue 1, 1990, Pages 1-14]
  • Behravesh, A. The Comparison of Punching Shear Capacity in Solid and Void Two-Way Slabs on Soil Substrate in Relation to Spring Stiffness Changes [Volume 33, Issue 10, 2020, Pages 1872-1885]
  • Behroozi, H. Predicting the Empirical Distribution of Video Quality Scores Using Recurrent Neural Networks [Volume 33, Issue 5, 2020, Pages 984-991]
  • Behroozifar, Mahmoud Numerical Solution of Optimal Control of Time-varying Singular Systems via Operational Matrices [Volume 27, Issue 4, 2014, Pages 523-532]
  • Behzad, M. Vibration Analysis of Rotating Shaft with Loose Disk [Volume 15, Issue 4, 2002, Pages 385-393]
  • Behzad, M. Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites [Volume 17, Issue 1, 2004, Pages 95-104]
  • Behzad, M. A New Approach for Vibration Analysis of a Cracked Beam [Volume 18, Issue 4, 2005, Pages 319-330]
  • Behzadi, M. Design and Fabrication of a Microwave Weed Killer Device for Weed Control Applications [Volume 32, Issue 7, 2019, Pages 947-953]
  • Behzadmehr, Amin Optimum Shape Design of a Radiant Oven by the Conjugate Gradient Method and a Grid Regularization Approach [Volume 25, Issue 2, 2012, Pages 167-176]
  • Beidaghy Dizaji, Hossein An Analytical Model for Flame Propagation through Moist Lycopodium Particles with Non-unity Lewis Number [Volume 27, Issue 5, 2014, Pages 793-802]
  • Beigy, Hamid A Two-Threshold Guard Channel Scheme for Minimizing Blocking Probability in Communication Networks [Volume 17, Issue 3, 2004, Pages 247-264]
  • Beiki, H. Multi-objective Optimization of Multi-vehicle Relief Logistics Considering Satisfaction Levels under Uncertainty [Volume 33, Issue 5, 2020, Pages 814-824]
  • Beiki, H. A Location-Routing Model for Assessment of the Injured People and Relief Distribution under Uncertainty [Volume 33, Issue 7, 2020, Pages 1274-1284]
  • Beirami, B. A. Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
  • Belahssen, Okba Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
  • Belgara, L. Optimizing of Steel Fiber Reinforced Concrete Mix Design [Volume 17, Issue 1, 2004, Pages 41-50]
  • Belkacem, S. Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator [Volume 33, Issue 2, 2020, Pages 248-256]
  • Belkacem, S. Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator [Volume 33, Issue 4, 2020, Pages 567-574]
  • Bell, T. Glow Discharge Depth Profiling a Powerful Analytical Technique in Surface Engineering (TECHNICAL NOTE) [Volume 10, Issue 2, 1997, Pages 111-119]
  • Beltrán, Luis Web Control and Monitoring System: Experimentation with Haematococcus Pluvialis (TECHNICAL NOTE) [Volume 26, Issue 3, 2013, Pages 219-228]
  • Benaggoune, S. Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator [Volume 33, Issue 2, 2020, Pages 248-256]
  • Benaggoune, S. Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator [Volume 33, Issue 4, 2020, Pages 567-574]
  • Ben aissia, Habib Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
  • Ben aissia, Habib Numerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection [Volume 28, Issue 9, 2015, Pages 1343-1350]
  • Ben aissia, Habib Numerical Study of Interaction of Two Plane Parallel Jets [Volume 29, Issue 10, 2016, Pages 1421-1430]
  • Benalouach, M. A. K. Flow Seals Parameters Analysis For Rotors [Volume 32, Issue 1, 2019, Pages 177-183]
  • Benamer, R Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
  • BENBOUHENNI, Habib Amelioration effectiveness of torque and rotor flux control applied to the asynchronous generator (AG) for dual-rotor wind turbine using neural third-order sliding mode approaches [(Articles in Press)]
  • Benbouzid, M. E A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System [Volume 31, Issue 4, 2018, Pages 580-587]
  • Benbouziyane, J. Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
  • BEN BOUZIYANE, Jamal A Method of Strip Footings Design for Light Structures on Expansive Clays [Volume 35, Issue 1, 2022]
  • Benchatti, A. Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
  • Bendiabdellah, A. A Proposed Approach for Separation between Short Circuit Fault, Magnetic Saturation Phenomenon and Supply Unbalance in Permanent Magnet Synchronous Motor [Volume 33, Issue 10, 2020, Pages 1968-1977]
  • Benmamoun, Z Comparison of Inventory Models for Optimal Working Capital; Case of Aeronautics Company [Volume 31, Issue 4, 2018, Pages 605-611]
  • Benouzza, N. A Proposed Approach for Separation between Short Circuit Fault, Magnetic Saturation Phenomenon and Supply Unbalance in Permanent Magnet Synchronous Motor [Volume 33, Issue 10, 2020, Pages 1968-1977]
  • Benramache, Said Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
  • Bensahal, D The Effect of the Variation of Volume Flow Rate on the Thermal Parameters of a Solar Air Collector with a Single Pass of Air: Case Study for Laghouat, Algeria [Volume 31, Issue 1, 2018, Pages 71-78]
  • Bensahal, Djamel Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
  • Bensahal, Djamel Effects of Material and Geometrical Parameters on the Free Vibration of Sandwich Beams [Volume 29, Issue 2, 2016, Pages 222-228]
  • Bensallam, Saad Shrinkage Curve: Experimental Study and Modelling [Volume 25, Issue 3, 2012, Pages 203-210]
  • Bera, Parthasarathi Tuning of Excitation and TCSC -Based Stabilizers for Multimachine Power System [Volume 23, Issue 1, 2010, Pages 37-52]
  • Besanjideh, Mohsen Nonlinear and Non-stationary Vibration Analysis for Mechanical Fault Detection by Using EMD-FFT Method [Volume 25, Issue 4, 2012, Pages 363-372]
  • Besmi, M.R. Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
  • Beulah, D The ensemble of Unsupervised Incremental Learning Algorithm for Time Series Data [Volume 35, Issue 2, 2022]
  • Bezboruah, T. Evaluating the Reliability of PwCOV: A Loosely Coupled Software as a Service for COVID-19 Data Processing System [Volume 33, Issue 12, 2020, Pages 2496-2502]
  • Bezboruah, Tulshi Investigation on Reliability Estimation of Loosely Coupled Software as a Service Execution Using Clustered and Non-Clustered Web Server [Volume 33, Issue 1, 2020, Pages 75-81]
  • Bhadauria, Abhimanyu Towards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer [Volume 29, Issue 4, 2016, Pages 554-562]
  • Bhandwal, M Estimate the Performance of Catalytic Converter Using Turbulence Induce Devices [Volume 31, Issue 5, 2018, Pages 856-862]
  • Bhardwaj, Diwakar Estimation of Network Reliability for a Fully Connected Network with Unreliable Nodes and Unreliable Edges using Neuro Optimization [Volume 22, Issue 4, 2009, Pages 317-332]
  • Bharti, D. Graph Theoretic Loss Allocation Method for Microgrids having Variable Generation [Volume 34, Issue 9, 2021, Pages 2060-2069]
  • Bhaskar, K Effect of Abrasion Process on Reflectance Factor and Color Change of Chenille Woven Fabrics [Volume 27, Issue 8, 2014, Pages 1317-1324]
  • Bhaskara Rao, J. Estimation of Roughness Parameters of A Surface Using Different Image Enhancement Techniques (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 652-658]
  • Bhat, J. A. Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
  • Bhatia, Satvinder Singh Singular Value Decomposition based Steganography Technique for JPEG2000 Compressed Images [Volume 28, Issue 12, 2015, Pages 1720-1727]
  • Bhatia, Upain Constriction Scour In Pressurized Flow Condition (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 237-246]
  • Bhatnagar, Amit A Numerical Analysis for the Effect of Slip Velocity and Stenosis Shape on Non-Newtonian Flow of Blood (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 440-446]
  • Bhatt, D. V. Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
  • Bidekani Bakhtiarvand, D. An Ensemble Click Model for Web Document Ranking [Volume 33, Issue 7, 2020, Pages 1208-1213]
  • Bigdeli, M. Mitigation Transformer Inrush Current Using Modified Transient Current Limiter [Volume 32, Issue 5, 2019, Pages 701-709]
  • Bigdeli, M. The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
  • Bigdeli, M. Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
  • Biglari, M Transient Entropy Generation Analysis During Wustite Pellet Reduction to Sponge Iron [Volume 31, Issue 8, 2018, Pages 1274-1282]
  • Biglari, M. Feature Selection for Small Sample Sets with High Dimensional Data Using Heuristic Hybrid Approach [Volume 33, Issue 2, 2020, Pages 213-220]
  • Bilad, M. Roil Adsorption Performance of Low-cost Java Plum Leaves and Guava Fruits as Natural Adsorbents for Removal of Free Fatty Acids from Coconut Oil [Volume 32, Issue 10, 2019, Pages 1372-1378]
  • Bilal Khan, M Control of a Robotic Wheel-Chair Prototype for People with Walking Disabilities [Volume 31, Issue 5, 2018, Pages 693-698]
  • Bina, K. Vulnerability Assessment of Steel Structures in District 12 of Mashhad City and Prioritizing the Welding Defects Using the Analytic Hierarchy Process [Volume 31, Issue 6, 2018, Pages 877-885]
  • Binaei, R. Novel Phase-frequency Detector based on Quantum-dot Cellular Automata Nanotechnology [Volume 33, Issue 2, 2020, Pages 269-276]
  • Bin Ibne Reaz, M. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
  • Binti Mohd Hanib, N. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
  • Bishnoi, Jaimala Soret Dufour Driven Thermosolutal Instability of Darcy-maxwell Fluid [Volume 25, Issue 4, 2012, Pages 367-378]
  • Bismantolo, P Parameters Optimization in Manufacturing Nanopowder Bioceramics of Eggshell with Pulverisette 6 Machine using Taguchi and ANOVA Method (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 45-49]
  • Biswas, A. Techno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms [Volume 30, Issue 10, 2017, Pages 1555-1564]
  • Biswas, R. R. Evaluating Seismic Effects on a Water Supply Network and Quantifying Post-Earthquake Recovery [Volume 32, Issue 5, 2019, Pages 654-660]
  • Blaabjerg, F. Nonlinear Control for Positive Output Super Lift Luo Converter in Stand Alone Photovoltaic System [Volume 33, Issue 2, 2020, Pages 237-247]
  • Blaabjerg, F. A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
  • Blinov, P. Development of Mathematical Model for Controlling Drilling Parameters with Screw Downhole Motor [Volume 33, Issue 7, 2020, Pages 1423-1430]
  • Blinov, P. A. Developments Made in the Field of Drilling Fluids by Saint Petersburg Mining University [Volume 33, Issue 4, 2020, Pages 702-711]
  • B. Mashahir, Mohammad Effect of Collars and Bars in Reducing the Local Scour Around Cylindrical Bridge Piers [Volume 22, Issue 4, 2009, Pages 333-342]
  • Bodaghi, M. BUCKLING ANALYSIS OF FUNCTIONALLY GRADED MINDLIN PLATES SUBJECTED TO LINEARLY VARYING IN-PLANE LOADING USING POWER SERIES METHOD OF FROBENIUS [Volume 25, Issue 1, 2012, Pages 89-106]
  • Boghrati, M. Various Approaches to Thermodynamic Optimization of a Hybrid Multi-effect Evaporation with Thermal Vapour Compression and Reverse Osmosis Desalination System Integrated to a Gas Turbine Power Plant [Volume 32, Issue 5, 2019, Pages 777-789]
  • Bohlooli, A. Neural Network Based Protection of Software Defined Network Controller against Distributed Denial of Service Attacks [Volume 30, Issue 11, 2017, Pages 1714-1722]
  • Boiko, J. M. Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
  • Bolong, J. Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 596-601]
  • Bolouri Bazaz, J. Reconstitution of Sand Specimens Using a Rainer System [Volume 30, Issue 10, 2017, Pages 1451-1463]
  • Bolouri Bazaz, J. Behavior of Eccentrically Inclined Loaded Ring Footings Resting on Granular Soil [Volume 33, Issue 11, 2020, Pages 2146-2154]
  • Bonakdari, Hossein Predicting Shear Stress Distribution in Rectangular Channels Using Entropy Concept [Volume 28, Issue 3, 2015, Pages 360-367]
  • Bonakdari, Hossein Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
  • Bonakdari, Hossein Impact of the Confluence Angle on Flow Field and Flowmeter Accuracy in Open Channel Junctions [Volume 28, Issue 8, 2015, Pages 1145-1153]
  • Bonakdari, Hossein Impact of the Confluence Angle on Flow Field and Flowmeter Accuracy in Open Channel Junctions [Volume 28, Issue 8, 2015, Pages 1145-1153]
  • Bonakdari, Hossein Numerical Analysis of Sediment Transport in Sewer Pipe [Volume 28, Issue 11, 2015, Pages 1564-1570]
  • Bonakdari, Hossein Flow Variables Prediction Using Experimental, Computational Fluid Dynamic and Artificial Neural Network Models in a Sharp Bend [Volume 29, Issue 1, 2016, Pages 14-22]
  • Bonakdari, Hossein Comparison of Three Soft Computing Methods in Estimating Apparent Shear Stress in Compound Channels [Volume 29, Issue 9, 2016, Pages 1219-1226]
  • Bonakdari, Hossein A Comparative Study of Extreme Learning Machines and Support Vector Machines in Prediction of Sediment Transport in Open Channels [Volume 29, Issue 11, 2016, Pages 1499-1506]
  • Bonakdarpour, B. The Study of Organic Removal Efficiency and Membrane Fouling in a Submerged Membrane Bioreactor Treating Vegetable Oil Wastewater [Volume 29, Issue 12, 2016, Pages 1642-1649]
  • Bonora, N A Strain Range Dependent Cyclic Plasticity Model [Volume 30, Issue 2, 2017, Pages 321-329]
  • Boostan, A. Seismic Response of 4-Legged Self-Supporting Telecommunication Towers [Volume 20, Issue 2, 2007, Pages 107-126]
  • Bora, A. Evaluating the Reliability of PwCOV: A Loosely Coupled Software as a Service for COVID-19 Data Processing System [Volume 33, Issue 12, 2020, Pages 2496-2502]
  • Bora, Abhijit Investigation on Reliability Estimation of Loosely Coupled Software as a Service Execution Using Clustered and Non-Clustered Web Server [Volume 33, Issue 1, 2020, Pages 75-81]
  • Bora, C. Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
  • Borghei, S. M. Effect of Polyethylene Glycol and Triton X-100 on the Enzymatic Treatment of Bisphenol A [Volume 31, Issue 11, 2018, Pages 1816-1823]
  • Borhani, E. Effect of Deformation-Induced Defects on the Microstructure and Pitting Corrosion Behavior of Al-Ag Alloy [Volume 31, Issue 12, 2018, Pages 2092-2101]
  • Borhani, Gholam hossein Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
  • Borji, Sadegh A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
  • Borjini, M. N. Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
  • Borjini, Naceur Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
  • Borjini, Naceur Numerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection [Volume 28, Issue 9, 2015, Pages 1343-1350]
  • Borna, Keivan An Adaptive Hierarchical Method Based on Wavelet and Adaptive Filtering for MRI Denoising [Volume 29, Issue 1, 2016, Pages 31-39]
  • Boroumandnia, Arezou Effect of TiO2 Nanofiber Density on Organic-Inorganic Based Hybrid Solar Cells (RESEARCH NOTE) [Volume 27, Issue 7, 2014, Pages 1133-1138]
  • Borthwick, A. G. L. Quadtree and Octree Grid Generation [Volume 9, Issue 1, 1996, Pages 9-18]
  • Borzouyi Kutenayi, S. The Effect of Caspian Sea Water on Corrosion Resistance and Compressive Strength of Reinforced Concrete Containing Different SiO2 Pozzolan [Volume 30, Issue 10, 2017, Pages 1464-1470]
  • Bosaghzadeh, A. A Sample Dependent Decision Fusion Algorithm for Graph-based Semi-supervised Learning [Volume 33, Issue 5, 2020, Pages 1010-1019]
  • Bouabdallah, said Effect of Magnetic Field on the Rotating Flow in a Similar Czochralski Configuration [Volume 29, Issue 4, 2016, Pages 563-571]
  • Boukharouba, T. Metallurgical and Mechanical Behavior of AISI 316- AISI 304 during Friction Welding Process [Volume 32, Issue 2, 2019, Pages 306-312]
  • Boukharouba, T. Experimental Investigation of Friction Pressure Influence on the Characterizations of Friction Welding Joint for AISI 316 [Volume 33, Issue 12, 2020, Pages 2514-2520]
  • Boukharouba, T. Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
  • BOURJANDI, Masoumeh Fuzzy Centralized Coordinate Learning and hybrid loss for human activity recognition [Volume 35, Issue 1, 2022]
  • Boussaada, M Emulation, Model Identification and New-approach Characterization of a PV Panel (TECHNICAL NOTE) [Volume 31, Issue 8, 2018, Pages 1222-1227]
  • Bousshine, L. A New Model of Equivalent Modulus Derived from Repeated Load CBR Test [Volume 33, Issue 7, 2020, Pages 1321-1330]
  • Boutabba, T A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System [Volume 31, Issue 4, 2018, Pages 580-587]
  • Boyer, O. A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
  • Bozarjomehri, R. B. A New Vapor Pressure Equation [Volume 3, Issue 3, 1990, Pages 98-103]
  • Bozorgi, A. A Bi-objective Stochastic Optimization Model for Humanitarian Relief Chain by Using Evolutionary Algorithms [Volume 30, Issue 10, 2017, Pages 1526-1537]
  • Bozorgi-Amiri, A A Procurement-distribution Coordination Model in Humanitarian Supply Chain Using the Information-sharing Mechanism [Volume 31, Issue 7, 2018, Pages 1057-1065]
  • Bozorgi-Amiri, A. Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
  • Bozorgi-Amiri, A. A Multi-attribute Reverse Auction Framework Under Uncertainty to the Procurement of Relief Items [Volume 31, Issue 12, 2018, Pages 2068-2076]
  • Bozorgi-Amiri, A. Evaluation and Ranking of Sustainable Third-party Logistics Providers using the D-Analytic Hierarchy Process [Volume 33, Issue 11, 2020, Pages 2233-2244]
  • Bozorgi-Amiri, A. A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
  • Bozorgmehr, M. The Effect of Nickel Increasing and Aluminum Addition on Sulfidation Resistance of Fe-Ni-Cr Alloys (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 161-168]
  • Bradford, M. A. Elastic Initial and Post-local Buckling of Profiled through Girders [Volume 12, Issue 1, 1999, Pages 1-12]
  • Brahimi, M. Probabilistic Approach to the Seismic Vulnerability of RC Frame Structures by the Development of Analytical Fragility Curves [Volume 30, Issue 7, 2017, Pages 945-954]
  • Brahmbhatt, Bhavik Arvindbhai Modified Second Order Generalized Integrator –Frequency Locked Loop Grid Synchronization for Single-Phase Grid-tied System Tuning and Experimentation Assessment [Volume 35, Issue 2, 2022]
  • Breau, C. Stress Analysis of the Human Ligamentous Lumber Spine-From Computer-Assisted Tomography to Finite Element Analysis [Volume 8, Issue 2, 1995, Pages 107-112]
  • Broumandnia, A. Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
  • Brusly Solomon, A. Experimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage [Volume 31, Issue 6, 2018, Pages 980-985]
  • B. Speily, O. R. Energy Aware Resource Management of Cloud Data Centers [Volume 30, Issue 11, 2017, Pages 1730-1739]
  • Bu, Yuhuan The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
  • Budi, L. S. Physical and Magnetic Properties Comparison of Cobalt Ferrite Nanopowder Using Sol-gel and Sonochemical Methods [Volume 33, Issue 5, 2020, Pages 877-884]
  • Budiyono, Budiyono Microwave Pretreatment of Fresh Water Hyacinth (Eichhornia Crassipes) in Batch Anaerobic Digestion Tank (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 832-840]
  • Burgos, L. M. Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
  • Burrows, R. Head-Driven Simulation of Water Supply Networks [Volume 15, Issue 1, 2002, Pages 11-22]
  • Buslaev, G. Augmented Reality System and Maintenance of Oil Pumps [Volume 33, Issue 8, 2020, Pages 1620-1628]
  • B. Wani, S. Influence of Bi-directional Fibreglass Grid Reinforcement on Drying Shrinkage and Mechanical Properties of Lightweight Foamed Concrete [Volume 34, Issue 1, 2021, Pages 10-18]
  • Bypour, H. An Efficient Secret Sharing-based Storage System for Cloud-based Internet of Things [Volume 32, Issue 8, 2019, Pages 1117-1125]

C

  • C, Angel Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 127-133]
  • Cano-Europa, E. Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
  • Cehn, Y. W. The Kinetics of Methanation on Nickel Catalysts [Volume 1, Issue 1, 1988, Pages 7-18]
  • Chaboki, A. Inelastic Continuum Modeling of Carbon Nanotube,s Behavior Using Finite Element Method [Volume 20, Issue 2, 2007, Pages 129-135]
  • Chaboki Khiabani, A. Stress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 227-234]
  • CHAFI, Anas Suppliers Selection in Consideration of Risks by a Neural Network [Volume 32, Issue 10, 2019, Pages 1454-1463]
  • Chakrabarty, R. Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
  • Chala, Abdelouahed Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
  • Chalkosh Amiri, M. Separation of Ultra - Fine Sulphur Particles from Nta Dispersion by Aphron Flotation [Volume 3, Issue 3, 1990, Pages 148-153]
  • Chalkosh Amiri, M. Modified Kremser Equation for Plate Type Gas Absorberin Non-Isothermal Operation (RESEARCH NOTE). [Volume 5, Issue 3, 1992, Pages 137-138]
  • Challagulla, S. P. Seismic Response of Building Structures with Sliding Non-structural Elements [Volume 33, Issue 2, 2020, Pages 205-212]
  • Chamani, M. Effect of Residual Stress on Failure of Tube-to-tubesheet Weld in Heat Exchangers [Volume 32, Issue 1, 2019, Pages 112-120]
  • Chan, H.Y. Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
  • Chandna, Ritu Reliability Measures Measurement under Rule-Based Fuzzy Logic Technique [Volume 28, Issue 10, 2015, Pages 1486-1492]
  • Chandra, S. Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
  • Chandra Kala, K An Efficient Hierarchical Modulation based Orthogonal Frequency Division Multiplexing Transmission Scheme for Digital Video Broadcasting [Volume 31, Issue 4, 2018, Pages 574-579]
  • Chandra Mandal, A. A Studyof the Design of Horizontal Axis Wind Turbine [Volume 6, Issue 2, 1993, Pages 117-124]
  • Chandramohan, S. Design and Evaluation of a Magnetorheological Damper Based Prosthetic Knee [Volume 32, Issue 1, 2019, Pages 146-152]
  • Chandramohan, Sujatha Performance Evaluation of Magnetorheological Damper Valve Configurations Using Finite Element Method [Volume 30, Issue 2, 2017, Pages 303-310]
  • Chandran, R. J. An Adaptively-damped Compressible-liquid Model for Non-cavitating Hydraulic Surges [Volume 33, Issue 10, 2020, Pages 2047-2056]
  • Chandrashekar, M. Evaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy [Volume 31, Issue 6, 2018, Pages 943-948]
  • Chandrikab, J. Evolutionary Computing Assisted Wireless Sensor Network Mining for QoS-Centric and Energy-efficient Routing Protocol [Volume 33, Issue 5, 2020, Pages 791-797]
  • Chandwani, Hina A Modified Second Order Generalized Integrator –Frequency Locked Loop Grid Synchronization for Single-Phase Grid-tied System Tuning and Experimentation Assessment [Volume 35, Issue 2, 2022]
  • Changbin, D. Dynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis [Volume 33, Issue 4, 2020, Pages 676-685]
  • Changbin, D. Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis [Volume 33, Issue 7, 2020, Pages 1364-1374]
  • Changsheng, Z. Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 596-601]
  • Chapokpour, jafar Estimation of Friction Coefficient in Sediment Contained Flow through Rockfill [Volume 26, Issue 2, 2013, Pages 187-196]
  • Charmin, A. Channel Estimation and Carrier Frequency Offset Compensation in Orthogonal Frequency Division Multiplexing System Using Adaptive Filters in Wavelet Transform Domain [Volume 33, Issue 7, 2020, Pages 1231-1239]
  • Chaturvedi, D. K. Studies with a Generalized Neuron Based PSS on a Multi-Machine Power System [Volume 17, Issue 2, 2004, Pages 131-140]
  • Chau, K. W. Experimental Modeling and Evaluation Sediment Scouring in Riverbeds around Downstream in Flip Buckets [Volume 33, Issue 10, 2020, Pages 1904-1916]
  • Chauahn, Deepa Working Vacation Queue with Second Optional Service and Unreliable Server [Volume 25, Issue 3, 2012, Pages 223-230]
  • Chaube, S Analysis of the Reliability of a Three-Component System with Two Repairmen [Volume 24, Issue 4, 2011, Pages 395-402]
  • Chehardoli, H. Third-order Decentralized Safe Consensus Protocol for Inter-connected Heterogeneous Vehicular Platoons [Volume 31, Issue 6, 2018, Pages 967-972]
  • Cheldavi, A. Capacitive Flux Compression Generator (RESEARCH NOTE) [Volume 16, Issue 4, 2003, Pages 337-348]
  • Cheldavi, A. Spice Compatible Model for Multiple Coupled Nonuniform Transmission Lines Application in Transient Analysis of VLSI Circuits [Volume 17, Issue 2, 2004, Pages 119-130]
  • Cheldavi, A. Comparison of Exact Analysis and Steplines Approximation for Externally Excited Exponential Transmission Line [Volume 18, Issue 1, 2005, Pages 11-20]
  • Chelongar, A. Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
  • Chen, G. Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
  • Chen, J. Design and Parameters Optimization of Pteris vittata Automatic Sowing Machine for Phytoremediation [Volume 33, Issue 4, 2020, Pages 694-701]
  • Chen, Jian Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
  • Chen, Jie Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
  • Chen, Zhijun Vibration of Train-Rail-Bridge Interaction Considering Rail Irregularity with Arbitrary Wavelength [Volume 28, Issue 4, 2015, Pages 516-522]
  • Chen, Z. Y. Numerical Analysis of Grease Film Characteristics in Tapered Roller Bearing Subject to Shaft Deflection [Volume 33, Issue 7, 2020, Pages 1403-1412]
  • Cheng, T. Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
  • Cheng, T. Multi-factorial Analysis on Vault Stability of an Unsymmetrically Loaded Tunnel Using Response Surface Method [Volume 32, Issue 11, 2019, Pages 1570-1576]
  • Cheraghalipour, A. An Integrated Approach for Collection Center Selection in Reverse Logistics [Volume 30, Issue 7, 2017, Pages 1005-1016]
  • Cheraghi, A. Thermodynamic Modeling the Solubility of CO2 in Aqua System of Methyldiethanolamine and 2-(2-Aminoethylamino)ethanol Using the Nonelectrolyte Wilson Nonrandom Factor [Volume 33, Issue 12, 2020, Pages 2436-2442]
  • Cheraghi Kootiani, Reza Investigation of a Powerful Tool for the Development of Thinly Bedded Carbonate Reservoirs (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1936-1943]
  • Chernoyarov, O. V. Digital Binary Phase-shift Keyed Signal Detector [Volume 32, Issue 4, 2019, Pages 510-518]
  • Chernoyarov, O. V. Secrecy of Communications in Data Transmission by Impulses with Unknown Moments of Appearance and Disappearance [Volume 32, Issue 4, 2019, Pages 548-554]
  • Chernoyarov, O. V. The Object Detection Efficiency in Synthetic Aperture Radar Systems [Volume 33, Issue 2, 2020, Pages 337-343]
  • Chernoyarov, O. V. Digital Root-mean-square Signal Meter [Volume 33, Issue 11, 2020, Pages 2201-2208]
  • Chikouche Hamina, M. Effects of Pozzolanic Admixture (Waste Bricks) on Mechanical Response of Mortar [Volume 21, Issue 1, 2008, Pages 1-8]
  • Chin, C. Seong Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
  • Chin, N. L Comparative Studies on Ultrasound Pre-treated Peanut Husk Powder and Ultrasound Simultaneous Process on Heavy Metal Adsorption [Volume 31, Issue 8, 2018, Pages 1334-1340]
  • Chinforoush, N. A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
  • CHINTALA, MAHESWARA RAO Tuning of Extended Kalman Filter using Self-adaptive Differential Evolution Algorithm for Sensorless Permanent Magnet Synchronous Motor Drive [Volume 29, Issue 11, 2016, Pages 1565-1573]
  • Chitizadeh, J. Performance Improvement of Expanded Integrated Local Area Networks (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 141-146]
  • Chitsaz, A. Thermodynamic Investigation and Optimization of a Power Generation System Based Solid Oxide Fuel Cell Using Taguchi Approach [Volume 32, Issue 7, 2019, Pages 1040-1048]
  • Chitsaz, A. Modeling and Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with an Oxygenated Fuel by Using an Exergoeconomic Methodology for Power, Heating and Cooling Production [Volume 33, Issue 3, 2020, Pages 477-485]
  • Chokan, F. The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
  • Cholker, Arvind Strain and Damage Sensing Property of Self-compacting Concrete Reinforced with Carbon Fibers [Volume 32, Issue 11, 2019, Pages 1577-1583]
  • Chong, W. C Improving Hydrophilicity of Polyethersulfone Membrane Using Silver Nanoparticles for Humic Substances Removal [Volume 31, Issue 8, 2018, Pages 1364-1372]
  • Choong, F. Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
  • Choudhari, C. S Testing of Environment Friendly Refrigerant R290 for Water Cooler Application (RESEARCH NOTE) [Volume 31, Issue 1, 2018, Pages 157-163]
  • Choudhary, Preeti Fuzzy Reliability Evaluation of a Repairable System with Imperfect Coverage, Reboot and Common-cause Shock Failure [Volume 25, Issue 3, 2012, Pages 231-238]
  • Choudhary, Preeti Performance Analysis of a Repairable Robot Safety System with Standby, Imperfect Coverage and Reboot Delay [Volume 26, Issue 9, 2013, Pages 1077-1088]
  • Choudhury, S. Comparative Performance Study of Tuned Liquid Column Ball Damper for Excessive Liquid Displacement on Response Reduction of Structure [Volume 33, Issue 5, 2020, Pages 753-759]
  • Choudhury, S. Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
  • Choudhury, S. Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
  • Choudhury, Satyabrata Damage Assessment of Reinforced Concrete Buildings Considering Irregularities (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1388-1394]
  • Choug, N. Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator [Volume 33, Issue 4, 2020, Pages 567-574]
  • Choupani, Naghdali A New Comparative Method To Evaluate the Fracture Properties of Laminated Composite [Volume 27, Issue 6, 2014, Pages 991-1004]
  • Chrifi-Alaoui, L A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System [Volume 31, Issue 4, 2018, Pages 580-587]
  • Chrismianto, Deddy Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
  • Christensen, B. A. Optimum Design of Interbasin Pipe System (RESEARCH NOTES) [Volume 8, Issue 1, 1995, Pages 49-54]
  • Chuan Ching, Dennis Ling Effect of Novel Swirl Distributor Plate on Hydrodynamics of Fluidized Bed Gasifier [Volume 32, Issue 10, 2019, Pages 1358-1365]
  • Chudasama, M. An Experimental Investigation of Parabolic Trough Collector Using Industrial-Grade Multiwall Carbon Nanotube (MWCNT) - H2O Based Nanofluid [Volume 35, Issue 1, 2022, Pages 112-120]
  • C L, Mahesh Kumar Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022]
  • Clausen, E. C. Bioreactor Scale-up for Water-Gas Shift Reaction [Volume 9, Issue 3, 1996, Pages 121-129]
  • Collier, Michael An Intelligent Computer Interface Utilizing Parallel Picocontrollers (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 367-370]
  • Collier, Michael The Opportunities Afforded by Embedded Computer Systems for Monitoring and Control of Industrial Processes in Less-Industrialised Countries (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 379-384]
  • Contreras, A. Objective Functions for the Optimization of an Ultra Wideband Antenna [Volume 34, Issue 7, 2021, Pages 1743-1749]
  • Cooper, V. Kinesiological Description of Hippotherapy as a Treatment Modality [Volume 33, Issue 11, 2020, Pages 2347-2355]
  • Cory, B. J. Real Time Dynamic Simulation of Power System Using Multiple Microcomputers [Volume 3, Issue 1, 1990, Pages 15-22]
  • Cui, X. Reliability Evaluation of a Disaster Airflow Emergency Control System Based on Bayesian Networks [Volume 33, Issue 11, 2020, Pages 2416-2424]
  • C.V, Subramanian Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector [Volume 27, Issue 5, 2014, Pages 811-818]

D

  • D, Prakash Multi Objective Optimization on Insulated Residential Roof with Solar Water Heating System Using Grey Relation Analysis (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1620-1627]
  • Dabaghi, E. Feature Dimension Reduction of Multisensor Data Fusion using Principal Component Fuzzy Analysis [Volume 30, Issue 4, 2017, Pages 493-499]
  • Dabbagh, R. A Multi-attribute Reverse Auction Framework Under Uncertainty to the Procurement of Relief Items [Volume 31, Issue 12, 2018, Pages 2068-2076]
  • Dabirian, F. Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
  • Dabiry, Yosef An Experimental Study on the Tensile Behaviors of Ultrasonic Welded T-joints for Polyamide Composite [Volume 29, Issue 12, 2016, Pages 1783-1790]
  • Dadashi Haji, M. The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
  • Dadashpour, I. Evaluation and Ranking of Sustainable Third-party Logistics Providers using the D-Analytic Hierarchy Process [Volume 33, Issue 11, 2020, Pages 2233-2244]
  • Dadban Shahamat, Y. Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
  • Dadgar, A. Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
  • Dadras, Mahmoud Reza A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
  • Daghbandan, Allahyar Multi-period and Multi-objective Stock Selection Optimization Model Based on Fuzzy Interval Approach [Volume 32, Issue 9, 2019, Pages 1306-1311]
  • Daghighi, S. Optimum Design of a Coir Fiber Biocomposite Tube Reinforced with Nano Silica and Nano Clay Powder [Volume 30, Issue 12, 2017, Pages 1894-1902]
  • Dahlan, Irvan Citronellyl Butyrate Synthesis in Non-Conventional Media Using Packed-Bed Immobilized Candida Rugosa Lipase Reactor [Volume 18, Issue 2, 2005, Pages 153-164]
  • Dahodwala, M Toward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation [Volume 31, Issue 7, 2018, Pages 1082-1087]
  • Dakshina Murthy, N. R. Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers [Volume 33, Issue 8, 2020, Pages 1465-1471]
  • Daliri, Hamid A Particle Swarm Optimization Approach to Joint Location and Scheduling Decisions in A Flexible Job Shop Environment [Volume 28, Issue 12, 2015, Pages 1756-1764]
  • Damghani, M. An Experimental Study on Geogrid with Geotextile Effects Aimed to Improve Clayey Soil [Volume 32, Issue 5, 2019, Pages 685-692]
  • Damiri Ganji, D. D. The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
  • Damiri- Ganji, Davood Analytic Approach to Investigation of Fluctuation and Frequency of the Oscillators with Odd and Even Nonlinearities [Volume 23, Issue 1, 2010, Pages 41-56]
  • Damiri- Ganji, Davood Analytical Solution of The Laminar Boundary Layer Flow over Semi-Infinite Flat Plate: Variable Surface Temperature [Volume 23, Issue 3, 2010, Pages 215-222]
  • Damiri- Ganji, Davood Analytical Investigation of Jeffery-hamel Fow with High Magnetic Field and Nano Particle by RVIM [Volume 25, Issue 3, 2012, Pages 249-256]
  • Damiri- Ganji, Davood Nanofluid Flow in a Semi-porous Channel in the Presence of Uniform Magnetic Field [Volume 26, Issue 6, 2013, Pages 653-662]
  • Damiri- Ganji, Davood Generating Electricity Power Using Movement of Various Vehicles in New Lighting Base [(Articles in Press)]
  • Danaei, M. M. A New Algorithm for Optimum Voltage and Reactive Power Control for Minimizing Transmission Lines Losses [Volume 14, Issue 2, 2001, Pages 91-98]
  • Danaei, M. M. Capacitive Flux Compression Generator (RESEARCH NOTE) [Volume 16, Issue 4, 2003, Pages 337-348]
  • Danesh Alagheh Band, T. S. A Post-disaster Assessment Routing Multi-objective Problem under Uncertain Parameters [Volume 33, Issue 12, 2020, Pages 2503-2508]
  • Daneshfar, E. Numerical and Experimental Investigation of Motor Pressure Effect on Thermochemical Erosion of Graphite Nozzle in Solid Fuel Engines [Volume 32, Issue 11, 2019, Pages 1656-1664]
  • Daneshfar, Leila An Inventory Model for Deteriorating Items Using Vendor-Managed Inventory Policy [Volume 27, Issue 7, 2014, Pages 1081-1090]
  • DaneshmandPour, Navid Real Time Implementation of a License Plate Location Recognition System Based on Adaptive Morphology [Volume 26, Issue 11, 2013, Pages 1347-1356]
  • Danesh-Manesh, H. Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
  • Daniali, S. Reinforced Concrete Columns in Torsion (RESEARCH NOTE). [Volume 6, Issue 4, 1993, Pages 179-185]
  • Daniel, C Seismic Mitigation of Building Frames using Magnetorheological Damper (TECHNICAL NOTE) [Volume 32, Issue 11, 2019, Pages 1543-1547]
  • Daniel, C. Experimental Study on Compressive Strength of Brick Using Natural Fibres [Volume 32, Issue 6, 2019, Pages 799-804]
  • Dankoub, A. Performance of High-strength Concrete Made with Recycled Ceramic Aggregates (Research Note) [Volume 33, Issue 6, 2020, Pages 1085-1093]
  • Dapeng, X. Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
  • Darabi, A. An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
  • Darabi, A. Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
  • Daraee, Atefe Analysis of Pre-processing and Post-processing Methods and Using Data Mining to Diagnose Heart Diseases [Volume 29, Issue 7, 2016, Pages 921-930]
  • Dardel, Morteza Large Deflection Analysis of Compliant Beams of Variable Thickness and Non-Homogenous Material under Combined Load and Multiple Boundary Conditions [Volume 25, Issue 4, 2012, Pages 353-362]
  • Dardel, Morteza Crack Detection of Timoshenko Beams Using Vibration Behavior and Neural Network [Volume 26, Issue 12, 2013, Pages 1433-1444]
  • Dardel, Morteza Stabilization and Walking Control for a Simple Passive Walker Using Computed Torque Method (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1777-1786]
  • Dardel, Morteza Dynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint [Volume 28, Issue 2, 2015, Pages 243-250]
  • Dardel, Morteza A Simple Method for Modeling Open Cracked Beam [Volume 28, Issue 2, 2015, Pages 321-329]
  • Darezereshki, E. Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
  • Dargush, G. F. Fundamental Solutions of Dynamic Poroelasticity and Generalized Termoelasticity [Volume 5, Issue 1, 1992, Pages 1-10]
  • Dariabeigi, Ehasan An Optimal Selection of Induction Heating Capacitance by Genetic Algorithm Considering Dissipation Loss Caused by ESR (TECHNICAL NOTE) [Volume 24, Issue 1, 2011, Pages 19-26]
  • Dariane, Aalireza Reservoir Operation During Droughts [Volume 16, Issue 3, 2003, Pages 209-216]
  • Darminto, D. Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis [Volume 32, Issue 7, 2019, Pages 982-990]
  • Darminto, D. Characterization of Fe3O4/rGO Composites from Natural Sources: Application for Dyes Color Degradation in Aqueous Solution [Volume 33, Issue 1, 2020, Pages 18-27]
  • Darminto, D. Structural, Optical and Defect State Analyses of ZnO Nanoparticle Films [Volume 33, Issue 5, 2020, Pages 852-860]
  • Darvishalipour, F. Fabrication of Nanoporous Functionalized Hydroxyapatite as High Performance Adsorbent for Acid Blue 25 Dye Removal [Volume 32, Issue 2, 2019, Pages 193-200]
  • Darvishan, Ehsan Comparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock [Volume 32, Issue 11, 2019, Pages 1591-1609]
  • Darvishi, Ali A Geometric View of Similarity Measures in Data Mining [Volume 28, Issue 12, 2015, Pages 1728-1737]
  • Darvishi, D. Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue [Volume 20, Issue 2, 2007, Pages 133-140]
  • Darvishi, D. Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
  • Darvishvand, H.R. Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
  • Darvizeh, A. Effect of Impact Parameters on Explosive Welding of Tube to a Plug [Volume 15, Issue 3, 2002, Pages 285-298]
  • Darvizeh, A. Numerical Simulation of Squeezed Flow of a Viscoplastic Material by a Three-step Smoothed Particle Hydrodynamics Method [Volume 26, Issue 4, 2013, Pages 341-350]
  • Daryadel, M Effect of Different Nanoparticles and Friction Stir Process Parameters on Surface Hardness and Morphology of Acrylonitrile Butadiene Styrene [Volume 31, Issue 7, 2018, Pages 1117-1122]
  • Daryadel, M. Study on Equal Channel Angular Pressing Process of AA7075 with Copper Casing by Finite Element-response Surface Couple Method [Volume 33, Issue 12, 2020, Pages 2538-2548]
  • Daryadel, Mahsa Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
  • DAS, DEBAPRIYA A Multi-Objective Method for Network Reconfiguration (TECHNICAL NOTE) [Volume 22, Issue 4, 2009, Pages 333-350]
  • DAS, DEBAPRIYA Tuning of Excitation and TCSC -Based Stabilizers for Multimachine Power System [Volume 23, Issue 1, 2010, Pages 37-52]
  • Dashti, Hamide Comparative Investigation of Half-mode SIW Cavity and Microstrip Hybrid Antenna Using Different Patch Shapes [Volume 27, Issue 10, 2014, Pages 1573-1580]
  • Dashti, Hamide Design Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays [Volume 28, Issue 5, 2015, Pages 686-692]
  • Dastagiri, M. Pongamia pinnata Plant Seed Oil as Dielectric Fluid for Electro Discharge Machining Process [Volume 32, Issue 12, 2019, Pages 1805-1812]
  • Dastjerdi, Shahriar Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 28, Issue 5, 2015, Pages 802-811]
  • Dastjerdi, Shahriar A Non-linear Static Equivalent Model for Multi-layer Annular/Circular Graphene Sheet Based on Non-local Elasticity Theory Considering Third Order Shear Deformation Theory in Thermal Environment [Volume 28, Issue 10, 2015, Pages 1533-1542]
  • Daud, M. H. A D2EHPA-Sulfuric Acid System for Simultaneous Extraction and Recovery of Nickel Ions via Supported Liquid Membrane Process [Volume 31, Issue 8, 2018, Pages 1373-1380]
  • Daud, Z. Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
  • Davami, P Computer Simulation of Equidxed Eutectic Solidifiction of Metals [Volume 12, Issue 4, 1999, Pages 247-258]
  • Davani Motlagh, A. Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
  • Davari, Ali Surface Pressure Contour Prediction Using a GRNN Algorithm [Volume 27, Issue 6, 2014, Pages 819-828]
  • Davari, A. R. A Semi-empirical Model to Predict the Attached Axisymmetric Shock Shape [Volume 33, Issue 8, 2020, Pages 1643-1651]
  • Davari, Pooya A Robust Feedforward Active Noise Control System with a Variable Step-Size FxLMS Algorithm: Designing a New Online Secondary Path Modelling Method [Volume 21, Issue 3, 2008, Pages 231-242]
  • Davari, Pooya An Optimized Online Secondary Path Modeling Method for Single-Channel Feedback ANC Systems [Volume 22, Issue 1, 2009, Pages 1-12]
  • Davari, S. Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
  • Davarnejad, R. Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
  • Davarnejad, R. Dye Adsorption on the Blends of Saffron Petals Powder with Activated Carbon: Response Surface Methodology [Volume 31, Issue 12, 2018, Pages 2001-2008]
  • Davarnejad, R. Prediction of Solubility of β-Carotene as a Component in a Multicomponent System in High-Pressure Carbon Dioxide [Volume 32, Issue 2, 2019, Pages 201-206]
  • Davarnejad, R. Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
  • Davarnejad, R. Simulation of Deposition Detection inside Wellbore by Photon Backscatter Radiography [Volume 33, Issue 12, 2020, Pages 2450-2454]
  • Davarnejad, R. Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
  • Davarnejad, reza Supercritical Fluid Extraction of Carotenoid from Microalgae with Projected Thermodynamic Models (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 117-126]
  • Davarnejad, reza Simulation of Convective Heat Transfer of a Nanofluid in a Circular Cross-section [Volume 26, Issue 6, 2013, Pages 571-576]
  • Davarnejad, reza Modeling of TiO2-water Nanofluid Effect on Heat Transfer and Pressure Drop [Volume 27, Issue 2, 2014, Pages 195-202]
  • Davarnejad, reza Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]
  • Davarnejad, reza Numerical Comparison of Turbulent Heat Transfer and Flow Characteristics of SiO2/Water Nanofluid within Helically Corrugated Tubes and Plain Tube [Volume 28, Issue 10, 2015, Pages 1408-1414]
  • Davarnejad, reza Application of Iron Electrode in Textile Industry Wastewater Treatment Using Electro-fenton Technique: Experimental and Statistical Study [Volume 29, Issue 7, 2016, Pages 887-897]
  • Davarnejad, Reza Pharmaceutical Wastewater Chemical Oxygen Demand Reduction: Electro-Fenton, UV-enhanced Electro-Fenton and Activated Sludge [Volume 32, Issue 12, 2019, Pages 1710-1715]
  • Davarnejad, Reza Numerical analysis of backscatter radiography for prediction of pipelines situation: Their bursting and casing failure consideration from inside [Volume 35, Issue 2, 2022]
  • Davarpanah, L. The Influence of Short Values of Hydraulic and Sludge Retention Time on Performance of a Membrane Bioreactor Treating Sunflower Oil Refinery Wastewater [Volume 30, Issue 10, 2017, Pages 1417-1424]
  • Davarpanah, Leila Performance of Continuous Electrocoagulation Process for Turbidity Removal from Sand Filter Backwash Water [Volume 32, Issue 12, 2019, Pages 1696-1703]
  • David, Deebak Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]
  • Davoodi, Mohammad Reza Output-only Modal Analysis of a Beam Via Frequency Domain Decomposition Method Using Noisy Data [Volume 32, Issue 12, 2019, Pages 1753-1761]
  • Davoodi, S. A. Hot Corrosion Behavior of Magnesite – Chromite Refractories Used in Reverberatory Furnaces at Sarcheshmeh Copper Complex [Volume 16, Issue 1, 2003, Pages 71-79]
  • Davoudi, M. Hadi Influence of Compaction Condition on the Microstructure of a Non-Plastic Glacial Till [Volume 17, Issue 3, 2004, Pages 227-236]
  • Davoudi, R Emergency Service Vehicle Location Problem with Batch Arrival of Demands [Volume 31, Issue 8, 2018, Pages 1240-1249]
  • Dayyari, S. Design and Fabrication of a Microwave Weed Killer Device for Weed Control Applications [Volume 32, Issue 7, 2019, Pages 947-953]
  • Debela, T. Implementation of Optimal Load Balancing Strategy for Hybrid Energy Management System in DC/AC Microgrid with PV and Battery Storage [Volume 32, Issue 10, 2019, Pages 1437-1445]
  • Dedi, Dedi Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022]
  • Dehghan, Hosein Detection of Alzheimer\\\\\\\'s Disease using Multitracer Positron Emission Tomography Imaging [Volume 27, Issue 1, 2014, Pages 51-56]
  • Dehghan, M. Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
  • Dehghani, A Using the Genetic Algorithm based on the Riedel Equation to Predict the Vapor Pressure of Organic Compounds [Volume 31, Issue 6, 2018, Pages 863-869]
  • Dehghani, A. Seismic Damage and Disaster Management Maps (A Case Study) [Volume 21, Issue 4, 2008, Pages 337-344]
  • Dehghani, Hamzeh Reliabilty-based Torsional Design of Reinforced Concrete Beams Strengthened with CFRP Laminate [Volume 26, Issue 10, 2013, Pages 1103-1110]
  • Dehghani, M Finite Plate with Circular and Square Hole under Partial Loading [Volume 31, Issue 7, 2018, Pages 1109-1116]
  • Dehghani, M. Influence of Water Cooling on Orthogonal Cutting Process of Ti-6Al-4V Using Smooth-Particle Hydrodynamics Method [Volume 32, Issue 8, 2019, Pages 1210-1217]
  • Dehghani, M.J. Phase Only Synthesis of Antenna Patterns Using Iterative Restoration Methods [Volume 7, Issue 1, 1994, Pages 1-6]
  • Dehghani, Navid Investigating the Effect of Underlying Fabric on the Bagging Behaviour of Denim Fabrics (RESEARCH NOTE) [Volume 32, Issue 9, 2019, Pages 1231-1237]
  • Dehghanian, F Emergency Service Vehicle Location Problem with Batch Arrival of Demands [Volume 31, Issue 8, 2018, Pages 1240-1249]
  • Dehghanian, Farzad The Simultaneous Effect of Holding Safety Stock and Purchasing Policies on the Economic Production Quantity Model Subject to Random Machine Breakdown [Volume 32, Issue 11, 2019, Pages 1643-1655]
  • Dehghanian, R. Polymer Impregnation of Concrete by Methyl Methacrylate and its Effects on Mechanical Properties and Corrosion of Steel in Concrete [Volume 2, Issue 3, 1989, Pages 78-83]
  • Dehghanian, R. Determination of Permeability of Concrete to Chloride Ions by Rapid Test Procedures [Volume 6, Issue 4, 1993, Pages 125-132]
  • Dehghanian, R. Effect of Impressed Current on Bond Strength Between Steel Rebar and Concrete [Volume 11, Issue 3, 1998, Pages 121-134]
  • Dehghanian, R. Evidence of the Potential Shift Mechanism in Crevice Corrosion (RESEARCH NOTES) [Volume 11, Issue 4, 1998, Pages 213-218]
  • Dehghanian, R. Theorical Investigation of Linear Response for Passivated Metallic Electrode Under Potential Step (RESEARCH NOTE) [Volume 12, Issue 2, 1999, Pages 107-112]
  • Dehghanian, R. A Hysteretic Two-phase Supply Modulator for Envelope Tracking RF Power Amplifiers [Volume 27, Issue 12, 2014, Pages 1832-1840]
  • Dehghani Mobarakeh, Mostafa Energy and Exergy Analysis of Air PV/T Collector of Forced Convection with and without Glass Cover [Volume 26, Issue 8, 2013, Pages 913-926]
  • Dehghani Rayeni, A. Effects of Gas Radiation on Thermal Performances of Single and Double Flow Plane Solar Heaters [Volume 33, Issue 6, 2020, Pages 1156-1166]
  • Dehghani Yazdeli, Reza Fluid Dynamics in a Copper Converter: an Investigation on Mixing Phenomena in an Experimental Model [Volume 29, Issue 1, 2016, Pages 118-126]
  • Dehghan Manshadi, M A Low Cost Numerical Simulation of a Supersonic Wind-tunnel Design [Volume 31, Issue 1, 2018, Pages 128-135]
  • Dehghan Manshadi, Mojtaba Speed Detection in Wind-Tunnels by processing Schlieren Images (RESEARCH NOTE) [Volume 29, Issue 7, 2016, Pages 962-967]
  • Dehghan Manshadi, Mojtaba Parametric Study of Movement Path in Two-dimensional Wing Flow Separation: Experimental Investigation [Volume 30, Issue 9, 2017, Pages 1401-1407]
  • Dehghan Naiery, A. A. Core Loading Design for Bushehr Pressurized Water Reactor [Volume 3, Issue 1, 1990, Pages 63-79]
  • Dehvari, Khalilalrahman Stimuli-responsive Biosynthesis of Gold Nanoparticles: Optimization, Kinetics, and Thermodynamics of Biosorption [Volume 32, Issue 11, 2019, Pages 1506-1515]
  • Dehzangi, A. Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
  • Deiranlou, Mehdi The Simultaneous Effect of Holding Safety Stock and Purchasing Policies on the Economic Production Quantity Model Subject to Random Machine Breakdown [Volume 32, Issue 11, 2019, Pages 1643-1655]
  • Delaram, F. Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
  • Delavarian, M. A Multilayer Motion Direction Based Model for Tracking Vehicles at Intersections [Volume 33, Issue 10, 2020, Pages 1939-1950]
  • Delfani, F. A Green Hazardous Waste Location-routing Problem Considering the Risks Associated with Transportation and Population [Volume 33, Issue 11, 2020, Pages 2272-2284]
  • Delfani, S. Direct Numerical Simulation of the Wake Flow Behind a Cylinder Using Random Vortex Method in Medium to High Reynolds Numbers [Volume 13, Issue 3, 2000, Pages 33-50]
  • Delfani, S. Numerical Simulation of the Wake Flow Behind an Ellipse using Random Vortex Method (RESEARCH NOTE) [Volume 16, Issue 2, 2003, Pages 183-192]
  • Delfani, S. The Effect of Geometrical Characteristics of Desiccant Wheel on its Performance [Volume 22, Issue 1, 2009, Pages 63-75]
  • Delkhosh, M. A New Framework for Advancement of Power Management Strategies in Hybrid Electric Vehicles [Volume 33, Issue 3, 2020, Pages 468-476]
  • Delkhosh, Mojtaba Modification of Equivalent Consumption Minimization Strategy for a Hybrid Electric Vehicle [Volume 29, Issue 12, 2016, Pages 1757-1764]
  • De Matteis, G. Experimental and Numerical Study of Perforated Steel Plate Shear Panels [Volume 33, Issue 4, 2020, Pages 520-529]
  • Demyanenkob, O. Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
  • Deng, S. Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
  • Dengqiu, Ma Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
  • Deo, S Combine Use of Fly Ash and Rice Husk Ash in Concrete to Improve its Properties (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1012-1019]
  • Deo, S. Durable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials [Volume 30, Issue 7, 2017, Pages 964-971]
  • Deo, S. V Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
  • Deo, S. V. Early Age Shrinkage Behavior of Triple Blend Concrete [Volume 33, Issue 8, 2020, Pages 1459-1464]
  • Derakhshan, A. A. Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
  • Derakhshan, Mostafa A New Intelligent Controller for Parallel DC/DC Converters [Volume 27, Issue 1, 2014, Pages 131-142]
  • Derbentsev, V. Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
  • Derhambakhsh, Maryam Preparation and Study of Molecular Structure of Copper Ions Doped in a Silica Xerogel Matrix [Volume 19, Issue 1, 2006, Pages 53-60]
  • Desa, H. M Vertical Ground Reaction Force Gait Patterns During Walking in Children with Autism Spectrum Disorders [Volume 31, Issue 5, 2018, Pages 705-711]
  • Desale, G. R. Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
  • Detchev, D. D. Signal Optimization During Radio Links Between a Transmitter and a Receiver Located in Adjacent Material Media with Differing Optical Densities (TECHNICAL NOTE) [Volume 13, Issue 3, 2000, Pages 87-89]
  • Devecioğlu, İ Demonstration of Synaptic Connections with Unipolar Junction Transistor based Neuron Emulators [Volume 33, Issue 11, 2020, Pages 2195-2200]
  • Devi, Chithra Starvation Free Scheduler for Buffered Crossbar Switches (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 523-528]
  • Devi, Reeta Global Stability for Thermal Convection in a Couple Stress Fluid Saturating a Porous Medium with Temperature-Pressure Dependent Viscosity: Galerkin Method [Volume 25, Issue 3, 2012, Pages 221-230]
  • Dhaka, Vijaypal Handwritten Character Recognition using Modified Gradient Descent Technique of Neural Networks and Representation of Conjugate Descent for Training Patterns [Volume 22, Issue 2, 2009, Pages 145-158]
  • Dhaka, Vijaypal Offline Language-free Writer Identification based on Speeded-up Robust Features [Volume 28, Issue 7, 2015, Pages 984-994]
  • Dhakad, M. R. Maximum Entropy Analysis for G/G/1 Queuing System (TECHNICAL NOTE) [Volume 16, Issue 2, 2003, Pages 163-170]
  • Dhanapal, D. Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
  • Dhanasekar, S. An Ultra-low-power Static Random-Access Memory Cell Using Tunneling Field Effect Transistor [Volume 33, Issue 11, 2020, Pages 2215-2221]
  • Dhouib, S. Optimization of Travelling Salesman Problem on Single Valued Triangular Neutrosophic Number using Dhouib-Matrix-TSP1 Heuristic [Volume 34, Issue 12, 2021, Pages 2642-2647]
  • Dhouibi, Hedi Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
  • Dhundasi, Abbas Ali Stress-Strain Characteristics of Reactive Powder Concrete Under Cyclic Loading [Volume 35, Issue 1, 2022]
  • Dhundasi, Abbas Ali An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022]
  • Dhyani, I. Queue with Heterogeneous Server Under Resequencing Constraint [Volume 9, Issue 3, 1996, Pages 169-174]
  • Dhyani, I. On Two-Echelon Multi-Server Queue with Balking and Limited Intermediate Buffer [Volume 14, Issue 2, 2001, Pages 131-142]
  • Diantoro, M. Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
  • Dickson, J. M. Overview of Reverse Osmosis for Chemical Engineers Part 1, Fundamentals of Membrane Mass Transfer [Volume 1, Issue 4, 1988, Pages 163-180]
  • Dickson, J. M. Overview of Reverse Osmosis for Chemical Engineers. Part 2: Applications of Transport Models [Volume 4, Issue 3, 1991, Pages 77-92]
  • Didehvar, N. Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
  • Diluckshanaraj, R. Comparison of Experimentally and Theoretically Determined Infiltration in Coarse Textured Soil [Volume 31, Issue 6, 2018, Pages 886-893]
  • Dinakaran, D Predictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models [Volume 31, Issue 1, 2018, Pages 32-37]
  • Din Mohammad, M. Determination of Suitable Concentrations of H2O and CO2 in the Feed of Syngas Production (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 21-28]
  • Disher Al-hydary, I. A. Optimizing the Properties of Metakaolin-based (Na, K)-Geopolymer Using Taguchi Design Method [Volume 33, Issue 4, 2020, Pages 631-638]
  • Divsalar, K. Numerical Simulation of Hydrodynamic Properties of Alex Type Gliders [Volume 33, Issue 7, 2020, Pages 1387-1396]
  • Dixit, A. A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
  • Djavareshkian, M. H. Transonic Turbulent Flow Simulation using Pressure-Based Method and Normalized Variable Diagram [Volume 17, Issue 3, 2004, Pages 299-310]
  • Djavareshkian, Mohammad Hossian Optimal Design of Magnetorheological Fluid Damper Based on Response Surface Method [Volume 28, Issue 9, 2015, Pages 1359-1367]
  • Djavidi, M. Numerical Investigation of Combined Radiation and Nutral Convention Heat Transfer in a Horizonal Annulus [Volume 12, Issue 4, 1999, Pages 259-270]
  • Dobrucky, B. The Object Detection Efficiency in Synthetic Aperture Radar Systems [Volume 33, Issue 2, 2020, Pages 337-343]
  • Dodangeh, Ali Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
  • DolatiAsl, K. Estimating Solar Radiation and Developing Iran’s Atlas Map of Optimum Monthly Tilt Angle (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1197-1204]
  • DolatiAsl, K. The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux [Volume 33, Issue 8, 2020, Pages 1590-1597]
  • Domeyri Ganji, Davood Simulation of Dual Fuel Combustion of Direct Injection Engine with Variable Natural Gas Premixed Ratio [Volume 32, Issue 9, 2019, Pages 1327-1336]
  • Dong, P. V. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Dong, P. V. Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
  • Doniavi, Ali Numerical Investigation on the Effect of Mold Design on Shrinkage of Sand Casted Multistage BB3-6×6 Pump Casing (RESEARCH NOTE) [Volume 29, Issue 8, 2016, Pages 1175-1182]
  • Doniavi, Ali Prediction and Optimization of Mechanical Properties of St52 in Gas Metal Arc Weld Using Response Surface Methodology and ANOVA [Volume 29, Issue 9, 2016, Pages 1307-1313]
  • Doniavi, Ali Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
  • Doostdar, H Experimental Study and Modeling of Reinforced Concrete Beams Strengthened by Post-Tensioned External Reinforcing Bars [Volume 23, Issue 2, 2010, Pages 127-144]
  • Doost Hoseini, A. M. Automatic Bounding Estimation in Modified Nlms Algorithm [Volume 15, Issue 1, 2002, Pages 35-42]
  • Doost Hoseini, A. M. Blind Separation of Jointly Stationary Correlated Sources [Volume 16, Issue 4, 2003, Pages 331-346]
  • Doostizadeh, M. A New Procedure for Reactive Power Market Clearing Considering Distributed Energy Resources [Volume 32, Issue 8, 2019, Pages 1134-1143]
  • Doost Mohammadi, M.H. New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
  • Doost Mohammadi, mohammad hossein Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 57-65]
  • Dorfeshan, Y. Solving Critical Path Problem in Project Network by a New Enhanced Multi-objective Optimization of Simple Ratio Analysis Approach with Interval Type-2 Fuzzy Sets [Volume 30, Issue 9, 2017, Pages 1352-1361]
  • Doroudi, A. A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
  • Doroudyan, Mohammad Hadi Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis [Volume 26, Issue 6, 2013, Pages 621-630]
  • Doroudyan, Mohammad Hadi Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
  • Dorrani, Z. Image Edge Detection with Fuzzy Ant Colony Optimization Algorithm [Volume 33, Issue 12, 2020, Pages 2464-2470]
  • Douadi, T. Improvement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC [Volume 31, Issue 10, 2018, Pages 1689-1697]
  • Doustary, M. A. Heuristic Process Model Simplification in Frequency Response Domain [Volume 17, Issue 1, 2004, Pages 19-39]
  • Doustdar, M. M. Numerical and Experimental Investigation of Motor Pressure Effect on Thermochemical Erosion of Graphite Nozzle in Solid Fuel Engines [Volume 32, Issue 11, 2019, Pages 1656-1664]
  • Dowlati, S Quality Factor of Free In-plane Vibration of a Fully Clamped Rectangular Micro-plate [Volume 31, Issue 1, 2018, Pages 96-103]
  • Dowlati, S. Study of Volumetric Flow Rate of a Micropump Using a Non-classical Elasticity Theory [Volume 31, Issue 6, 2018, Pages 986-996]
  • Drake, P. R. Network Planning Using Iterative Improvement Methods and Heuristic Techniques [Volume 15, Issue 1, 2002, Pages 63-74]
  • Drake, P. R. A Novel Experimental Analysis of the Minimum Cost Flow Problem [Volume 22, Issue 3, 2009, Pages 251-268]
  • Drake, P. R. Global Supply Chain Management under Carbon Emission Trading Program Using Mixed Integer Programming and Genetic Algorithm [Volume 24, Issue 1, 2011, Pages 37-53]
  • Drebenstedt, C. Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
  • Dresscher, D. A New Mechanical Design for Legged Robots to Reduce Energy Consumption [Volume 33, Issue 12, 2020, Pages 2530-2537]
  • Drid, S A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System [Volume 31, Issue 4, 2018, Pages 580-587]
  • Du, X. The Effect to Epsilon Phase on the Friction and Wear of Nitrided Die Steels (RESEARCH NOTE) [Volume 11, Issue 3, 1998, Pages 175-179]
  • Dubey, A. K. Impact Analysis of Variation in Geometrical Features on Intrinsic Characteristics of Capacitive Micro-machined Ultrasonic Transducers [Volume 31, Issue 11, 2018, Pages 1846-1851]
  • Dubini, Gabriele A Study on Ratio of Loss to Storage Modulus for the Blood Clot [Volume 27, Issue 8, 2014, Pages 1167-1172]
  • Duc, N. V. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Duhan, Ravi Effect of Activated Flux on Properties of SS 304 Using TIG Welding [Volume 28, Issue 2, 2015, Pages 290-295]
  • Duma, Agam Ultrasound Assisted In Situ Esterification of Rubber Seeds Oil for Biodiesel Production (RESEARCH NOTE) [Volume 29, Issue 12, 2016, Pages 1635-1641]
  • Dung, H. T. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
  • Durali, M. A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
  • Durali, Mohammad Investigation of Wagon Derailment Moving on Random Rail Irregularities using Nonlinear 3-Dimentional Model (RESEARCH NOTE) [Volume 21, Issue 4, 2008, Pages 385-400]
  • Dvoynikov, M. Designing a High Resistant, High-torque Downhole Drilling Motor (RESEARCH NOTE) [Volume 30, Issue 10, 2017, Pages 1615-1621]
  • Dvoynikov, M. Development of Mathematical Model for Controlling Drilling Parameters with Screw Downhole Motor [Volume 33, Issue 7, 2020, Pages 1423-1430]
  • Dvoynikov, M. V. Developments Made in the Field of Drilling Fluids by Saint Petersburg Mining University [Volume 33, Issue 4, 2020, Pages 702-711]
  • Dyamannavr, Neelappa Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 127-133]
  • Dzyura, V. O. Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]

E

  • E, Natarajan An Investigation of Temperature Effects on Solar Photovoltaic Cells and Modules [Volume 27, Issue 11, 2014, Pages 1713-1722]
  • E. Babadi, M. Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
  • Ebadi, A. A New Restricted Earth Fault Relay Based on Artificial Intelligence [Volume 32, Issue 1, 2019, Pages 62-70]
  • Ebadi, A. A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
  • Ebadzadeh, T. Infiltration of Porous Zircon Preforms With Alumina Precursor (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 295-300]
  • Ebenezer, S. P. Window Air Conditioner with Orthodox Refrigerants [Volume 32, Issue 2, 2019, Pages 322-327]
  • Ebrahimi, A. A New Approach for Vibration Analysis of a Cracked Beam [Volume 18, Issue 4, 2005, Pages 319-330]
  • Ebrahimi, A. Dairy Wastewater Treatment using Three-Stage Rotating Biological Contactor (NRBC) [Volume 22, Issue 2, 2009, Pages 107-114]
  • Ebrahimi, A. Electrokinetic and Sediment Remediation in Microbial Fuel Cell (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 489-494]
  • Ebrahimi, A. Designing a Model for Creation of Export Consortiain Business Cluster [Volume 33, Issue 3, 2020, Pages 459-467]
  • Ebrahimi, Afshin Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
  • Ebrahimi, Atiyeh Electrical Energy Management in Industrial Wastewater Treatment Plant [Volume 32, Issue 9, 2019, Pages 1269-1276]
  • Ebrahimi, B. Optimal Sliding-Mode Guidance Law for Fixed-Interval Propulsive Maneuvers [Volume 21, Issue 2, 2008, Pages 105-112]
  • Ebrahimi, E. Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
  • Ebrahimi, Ghanbar