International Journal of Engineering

Main Subjects = Mechanical Engineering

Formation Control and Obstacle Avoidance of a Multi-Quadrotor System Based on Model Predictive Control and Improved Artificial Potential Field

Volume 37, Issue 1, January 2024, Pages 115-126

F. Ghaderi; A. Toloei; R. Ghasemi

Optimization of Operating Parameters of a Scroll Expander Based on Response Surface and NSGA II

Volume 37, Issue 1, January 2024, Pages 136-150

L. Shi; B. Peng

Development of Temperature-strain Prediction Based on Deformation-induced Heating Mechanism in SCM440 Surface Cracked Shaft under Ultrasonic Excitation

Volume 37, Issue 1, January 2024, Pages 151-166

P. Lap-Arparat; K. Tuchinda

Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry

Volume 36, Issue 11, November 2023, Pages 1961-1971

N. Nurbaiti; A. E. Tontowi; M. G. Widyastuti; H. V. Hoten; F. Ibrahim; N. Muna; R. Febrian; D. P. Perkasa; M. K. Herliansyah

Investigation of Shell Side Overall Performance of a Novel Shell-and-Double-Concentric –tube Heat Exchanger with Simple and Perforated Helical Baffles

Volume 36, Issue 11, November 2023, Pages 1972-1981

H. O. Sayevand; S. Khorshidi; B. Keshavarzian

Effect of Inclined Angle in Trimming of Ultra-high Strength Steel Sheets Having Inclined and Curved Shapes

Volume 36, Issue 11, November 2023, Pages 2004-2014

K. Y. Leong; H. Jaafar; L. Tajul; Z. A. Zailani; R. Hamidon; M. Z. M. Zain

Numerical Study and Comparison of Two-dimensional Ferrofluid Flow in Semi-porous Channel under Magnetic Field

Volume 36, Issue 11, November 2023, Pages 2087-2101

P. Jalili; M. D. Afifi; B. Jalili; A. M. Mirzaei; D. D. Ganji

Quadrotor Control for Tracking Moving Target, and Dynamic Obstacle Avoidance Based on Potential Field Method

Volume 36, Issue 10, October 2023, Pages 1720-1732

F. Ghaderi; A. Toloei; R. Ghasemi

Efficiency Optimization Thermal Analysis and Power Output of a Modified Incinerator Plant Using Organic Rankine Cycle

Volume 36, Issue 7, July 2023, Pages 1300-1309

P. Vanaei; B. Jalili; M. Hosseinzadeh; P. Jalili

Power and Ventilation Performance Study in a Modified Vertical Axis Wind Turbine Based on Semi-analytical Approach

Volume 36, Issue 7, July 2023, Pages 1331-1342

S. Karimian; S. Saham

Investigation of the Damping Performance of a Shape Memory Alloy Beam

Volume 36, Issue 7, July 2023, Pages 1369-1382

N. Danesh; M. J. Mahmoodabadi; A. R. Fathi

Numerical Modeling of Sediment-flow around Obstacle Inspired by Marine Sponges: Considering Body Configurations

Volume 36, Issue 6, June 2023, Pages 1066-1074

M. Hashempour; M. Kolahdoozan

Application of Ultra-sensitive Pillar-enhanced Quartz Crystal Resonators for Airborne Detection of Nanoparticles: A Theoretical Study

Volume 36, Issue 6, June 2023, Pages 1136-1142

X. Xie; B. Zheng

A Dynamic Model for Laminated Piezoelectric Microbeam

Volume 36, Issue 6, June 2023, Pages 1143-1149

Z. Zhang; G. Fu; D. Xu

Experimental Analysis of Square Position on Variable Displacement Electrohydraulic Actuation System by Open Loop Control

Volume 36, Issue 6, June 2023, Pages 1185-1192

G. Kumar; N. P. Mandal

Effect of Surface Roughness on Brinell Hardness and Load-Displacement Curves using a Macro Indentation

Volume 36, Issue 5, May 2023, Pages 914-924

A. Karbasian; M. Shirazi; A. H. Mahmoudi

Comparative Environmental Impact Assessment of Battery Electric Vehicles and Conventional Vehicles: A Case Study of India

Volume 36, Issue 5, May 2023, Pages 965-978

A. P. Bhosale; S. A. Mastud

Investigating the Effect of Clearance Distance between the Floor of a High-speed Train and Ground on Aerodynamic Forces in Presence of Side Wind

Volume 36, Issue 4, April 2023, Pages 604-614

S. Norouzi; S. Hossainpour; M. M. Rashidi

Experimental Investigation on the Effect of Flow Rate and Load on the Hydrodynamic Behavior and Performance of an Archimedes Screw Turbine

Volume 36, Issue 4, April 2023, Pages 733-745

M. Zamani; R. Shafaghat; B. Alizadeh Kharkeshi

Viscosity Analysis of Water-based Copper Oxide Nanofluids

Volume 36, Issue 3, March 2023, Pages 481-489

J. Singh; R. Kumar; H. Kumar; M. Gupta

Fabrication of Aluminum 5083/SiC Surface Composite on Tungsten Inert Gas Weld Joint by Novel Direct Friction Stir Processing Technique

Volume 36, Issue 3, March 2023, Pages 523-531

K. D. Tandel; J. V. Menghani

Analytical Modeling of Heat Transfer Coefficient Analysis in Dimensionless Number of an Electric Parking Brake Using CFD

Volume 36, Issue 2, February 2023, Pages 276-288

V. Agrawal; H. P. Khairnar

Computational Study of Excitation Controlling Parameters Effect on Uniform Beam Deformation under Vibration

Volume 36, Issue 1, January 2023, Pages 60-70

P. Lap-Arparat; K. Tuchinda

Energy Harvesting from Vibrating Cantilever Structure of Different Base Materials using Piezoelectric Material: Theoretical and Experimental Approach

Volume 36, Issue 1, January 2023, Pages 152-162

A. Krishna; S. Palanivelu

Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis

Volume 35, Issue 12, December 2022, Pages 2283-2290

G. Sadripour; R. Shafaghat; B. Alizadeh Kharkeshi; R. Tabassom; A. Mahmoudi

Journal Archive

Volume 37 (2024)

Volume 36 (2023)

Volume 35 (2022)

Volume 34 (2021)

Volume 33 (2020)

Volume 32 (2019)

Volume 31 (2018)

Volume 30 (2017)

Volume 29 (2016)

Volume 28 (2015)

Volume 27 (2014)

Volume 26 (2013)

Volume 25 (2012)

Volume 24 (2011)

Volume 23 (2010)

Volume 22 (2009)

Volume 21 (2008)

Volume 20 (2007)

Volume 19 (2006)

Volume 18 (2005)

Volume 17 (2004)

Volume 16 (2003)

Volume 15 (2002)

Volume 14 (2001)

Volume 13 (2000)

Volume 12 (1999)

Volume 11 (1998)

Volume 10 (1997)

Volume 9 (1996)

Volume 8 (1995)

Volume 7 (1994)

Volume 6 (1993)

Volume 5 (1992)

Volume 4 (1991)

Volume 3 (1990)

Volume 2 (1989)

Volume 1 (1988)