International Journal of Engineering

Keywords = Response Surface Methodology

Optimization of operating three parameters of a scroll expander based on response surface and NSGA II

Articles in Press, Accepted Manuscript, Available Online from 30 August 2023

Lei Shi; bin Peng

View Article

Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation

Volume 35, Issue 11, November 2022, Pages 2247-2255

D. Doreswamy; D. S. Shreyas; S. K. Bhat

Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction

Volume 35, Issue 7, July 2022, Pages 1268-1282

M. M. Rahman; T. T. Nahar; D. Kim; D. W. Park

Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts

Volume 35, Issue 2, February 2022, Pages 351-359

P. Andami; A. A. Zinatizadeh; M. Feyzi; H. Zangeneh; S. Azizi; L. Norouzi; M. Maaza

Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing

Volume 34, Issue 10, October 2021, Pages 2371-2378

A. Ghorbankhan Ghorbankhan; M. R. Nakhaei

Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm

Volume 34, Issue 9, September 2021, Pages 2157-2166

A. Venkata Vishnu; S. Sudhakar Babu

Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM

Volume 34, Issue 5, May 2021, Pages 1305-1312

M. Rajaee; S.J. Hosseinipour; H. Jamshidi Aval

Study on Equal Channel Angular Pressing Process of AA7075 with Copper Casing by Finite Element-response Surface Couple Method

Volume 33, Issue 12, December 2020, Pages 2538-2548

M. Daryadel

Micro-structural Deformation Field Analysis of Aluminum Foam using Finite Element Method and Digital Image Correlation

Volume 33, Issue 10, October 2020, Pages 2065-2078

B. Akhavan; A. Pourkamali Anaraki; A. Malian; Y. Taraz Jamshidi

Thermodynamic Analysis and Statistical Investigation of Effective Parameters for Gas Turbine Cycle using the Response Surface Methodology

Volume 33, Issue 5, May 2020, Pages 894-905

M. E. Kazemian; S. A. Gandjalikhan Nassab

Pharmaceutical Wastewater Chemical Oxygen Demand Reduction: Electro-Fenton, UV-enhanced Electro-Fenton and Activated Sludge

Volume 32, Issue 12, December 2019, Pages 1710-1715

Rezvan Behfar; Reza Davarnejad; Rouhollah Heydari

Stimuli-responsive Biosynthesis of Gold Nanoparticles: Optimization, Kinetics, and Thermodynamics of Biosorption

Volume 32, Issue 11, November 2019, Pages 1506-1515

Khalilalrahman Dehvari; Mohammad Pazouki; Azarmidokht Hosseinnia

A Comprehensive Study of the Hydroforming Process of Metallic Bellows: Investigation and Multi-objective Optimization of the Process Parameters

Volume 32, Issue 11, November 2019, Pages 1681-1688

Mehdi Safari; Jalal Joudaki; Younes Ghadiri

Experimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine

Volume 31, Issue 10, October 2018, Pages 1760-1766

S. S. Patel; J. M. Prajapati

Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite

Volume 31, Issue 7, July 2018, Pages 1088-1094

D. K Jesthi; A Nayak; B. C Routara; R. K Nayak

Experimental Investigation of the Effect of Process Parameters on the Surface Roughness in Finishing Process of Chrome Coated Printing Cylinders (TECHNICAL NOTE)

Volume 29, Issue 12, December 2016, Pages 1775-1782

Emran babazadeh asbagh; Vahid Modanloo; Vali Alimirzaloo; ali donyavi

An Experimental Study on the Tensile Behaviors of Ultrasonic Welded T-joints for Polyamide Composite

Volume 29, Issue 12, December 2016, Pages 1783-1790

Yosef Dabiry; Reza Nikoi; yones dabiry

Lipase Catalyzed Incorporation of Conjugated Linoleic Acid by Transesterification into Sunflower Oil Applying Immobilized Lipase (Lipozyme Thermomyces lanuginosus and Rhizomucor mehei)

Volume 29, Issue 4, April 2016, Pages 436-443

Iran Alemzadeh; Zahra Kouchakyazdi

Parameters Design and Economy Study of an Electric Vehicle with Powertrain Systems in Front and Rear Axle

Volume 29, Issue 4, April 2016, Pages 454-463

Song Gao; Zhe Wu; Binbin Sun

Minimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method

Volume 29, Issue 2, February 2016, Pages 264-273

Vahid Modanloo; Vali Alimirzaloo

Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure?

Volume 28, Issue 11, November 2015, Pages 1644-1650

W. A. A. Alqaraghuli; A. F. M. Alkarkhi; H. C. Low

Reduction of Odometry Error in a two Wheeled Differential Drive Robot (TECHNICAL NOTE)

Volume 27, Issue 3, March 2014, Pages 359-366

R. Saravanan; T. Ravikumar

Influence of Glycerol and Clay Contents on Biodegradability of Corn Starch Nanocomposites

Volume 27, Issue 2, February 2014, Pages 203-214

M. Vossoughi; Iran Alemzadeh; Amir Heydari

Solving a Redundancy Allocation Problem by a Hybrid Multi-objective Imperialist Competitive Algorithm

Volume 26, Issue 9, September 2013, Pages 1031-1042

Reza Tavakkoli-Moghaddam; Maghsood Amiri; Roozbeh Azizmohammadi

Journal Archive

Volume 36 (2023)

Volume 35 (2022)

Volume 34 (2021)

Volume 33 (2020)

Volume 32 (2019)

Volume 31 (2018)

Volume 30 (2017)

Volume 29 (2016)

Volume 28 (2015)

Volume 27 (2014)

Volume 26 (2013)

Volume 25 (2012)

Volume 24 (2011)

Volume 23 (2010)

Volume 22 (2009)

Volume 21 (2008)

Volume 20 (2007)

Volume 19 (2006)

Volume 18 (2005)

Volume 17 (2004)

Volume 16 (2003)

Volume 15 (2002)

Volume 14 (2001)

Volume 13 (2000)

Volume 12 (1999)

Volume 11 (1998)

Volume 10 (1997)

Volume 9 (1996)

Volume 8 (1995)

Volume 7 (1994)

Volume 6 (1993)

Volume 5 (1992)

Volume 4 (1991)

Volume 3 (1990)

Volume 2 (1989)

Volume 1 (1988)