Optimal Policy of Condition-Based Maintenance Considering Probabilistic Logistic Times and the Environmental Contamination Issues

Authors

1 Departement of Industrial Engineering, K.N. Toosi University,Tehran, Iran

2 Departement of Industrial Engineering, Science and Technology University,Tehran, Iran

Abstract

One important issue in using the industrial and manufacturing facilities is to consider their impacts on the environment. Many of these equipment have negative effects on the environment when operated for sometimes. In this research the probabilistic logistic times and the destructive effects for maintenance are studied and appropriate model is suggested and evaluated. The aim of the proposed model is to optimize the total costs by determining the optimal inspection times by means of genetic algorithm. The results indicate that the proposed model improves the costs of maintenance.

Keywords

References

1.     Chouikhi, H., Khatab, A. and Rezg, N., "A condition-based maintenance policy for a production system under excessive environmental degradation", Journal of Intelligent Manufacturing,  Vol. 25, No. 4, (2014), 727-737.
2.     Bloch, H.P. and Geitner, F.K., "Machinery failure analysis and troubleshooting: Practical machinery management for process plants, Butterworth-Heinemann,  (2012).
3.     Perez-Ocon, R. and Montoro-Cazorla, D., "Transient analysis of a repairable system, using phase-type distributions and geometric processes", IEEE Transactions on Reliability,  Vol. 53, No. 2, (2004), 185-192.
4.     Cassady, C.R., Iyoob, I.M., Schneider, K. and Pohl, E.A., "A generic model of equipment availability under imperfect maintenance", IEEE Transactions on Reliability,  Vol. 54, No. 4, (2005), 564-571.
5.     Wang, D. and Trivedi, K.S., "Computing steady-state mean time to failure for non-coherent repairable systems", IEEE Transactions on Reliability,  Vol. 54, No. 3, (2005), 506-516.
6.     Chen, D. and Trivedi, K.S., "Optimization for condition-based maintenance with semi-markov decision process", Reliability Engineering & System Safety,  Vol. 90, No. 1, (2005), 25-29.
7.     Wu, S. and Clements-Croome, D., "Optimal maintenance policies under different operational schedules", IEEE Transactions on Reliability,  Vol. 54, No. 2, (2005), 338-346.
8.     Zheng, Z., Cui, L. and Hawkes, A.G., "A study on a single-unit markov repairable system with repair time omission", IEEE Transactions on Reliability,  Vol. 55, No. 2, (2006), 182-188.
9.     Tang, Y.-y. and Lam, Y., "A δ-shock maintenance model for a deteriorating system", European Journal of Operational Research,  Vol. 168, No. 2, (2006), 541-556.
10.   Liao, H., Elsayed, E.A. and Chan, L.-Y., "Maintenance of continuously monitored degrading systems", European Journal of Operational Research,  Vol. 175, No. 2, (2006), 821-835.
11.   Chien, Y.-H. and Sheu, S.-H., "Extended optimal age-replacement policy with minimal repair of a system subject to shocks", European Journal of Operational Research,  Vol. 174, No. 1, (2006), 169-181.
12.   Chien, Y.-H., Sheu, S.-H., Zhang, Z.G. and Love, E., "An extended optimal replacement model of systems subject to shocks", European Journal of Operational Research,  Vol. 175, No. 1, (2006), 399-412.
13.   Jardine, A.K., Lin, D. and Banjevic, D., "A review on machinery diagnostics and prognostics implementing condition-based maintenance", Mechanical systems and signal processing,  Vol. 20, No. 7, (2006), 1483-1510.
14.   Wang, H. and Pham, H., "Availability and maintenance of series systems subject to imperfect repair and correlated failure and repair", European Journal of Operational Research,  Vol. 174, No. 3, (2006), 1706-1722.
15.   Zhang, Y.L., "A bivariate optimal replacement policy for a repairable system", Journal of Applied Probability,  Vol. 31, No. 4, (1994), 1123-1127.
16.   Deltas, G., Harrington, D.R. and Khanna, M., "Green management and the nature of technical innovation", Urbana,  Vol. 51, (2007), 61801.
17.   RABANI, M., Manavizadeh, N. and Balali, S., "A stochastic model for indirect condition monitoring using proportional covariate model", International Journal of Engineering Transactions A: Basics Vol. 21, No. 1 (2008), 45-56.
18.   Quan, G., Greenwood, G.W., Liu, D. and Hu, S., "Searching for multiobjective preventive maintenance schedules: Combining preferences with evolutionary algorithms", European Journal of Operational Research,  Vol. 177, No. 3, (2007), 1969-1984.
19.   Crowder, M. and Lawless, J., "On a scheme for predictive maintenance", European Journal of Operational Research,  Vol. 176, No. 3, (2007), 1713-1722.
20.   Peng, Y., Dong, M. and Zuo, M.J., "Current status of machine prognostics in condition-based maintenance: A review", The International Journal of Advanced Manufacturing Technology,  Vol. 50, No. 1-4, (2010), 297-313.
21.   Tian, Z., Jin, T., Wu, B. and Ding, F., "Condition based maintenance optimization for wind power generation systems under continuous monitoring", Renewable Energy,  Vol. 36, No. 5, (2011), 1502-1509.
22.   Wang, W., "A simulation-based multivariate bayesian control chart for real time condition-based maintenance of complex systems", European Journal of Operational Research,  Vol. 218, No. 3, (2012), 726-734.
23.   Mishra, A. and Jain, M., "Maintainability policy for deteriorating system with inspection and common cause failure", Int J Eng Trans C Basics,  Vol. 26, No. 6, (2013), 371-380.
24.   Le, M.D. and Tan, C.M., "Optimal maintenance strategy of deteriorating system under imperfect maintenance and inspection using mixed inspectionscheduling", Reliability Engineering & System Safety,  Vol. 113, (2013), 21-29.
25.   Do, P., Voisin, A., Levrat, E. and Iung, B., "A proactive condition-based maintenance strategy with both perfect and imperfect maintenance actions", Reliability Engineering & System Safety,  Vol. 133, (2015), 22-32.
26.   Chen, N., Ye, Z.-S., Xiang, Y. and Zhang, L., "Condition-based maintenance using the inverse gaussian degradation model", European Journal of Operational Research,  Vol. 243, No. 1, (2015), 190-199.
27.   Mokhtari, H., Noroozi, A. and MOLLA, A.Z.S., "A reliability based modelling and optimization of an integrated production and preventive maintenance activities in flowshop scheduling problem",  International Journal of Engineering Transactions C: Aspects,. Vol. 28, No. 12, (2015) 1774-1781.
28.   Sarker, B.R. and Faiz, T.I., "Minimizing maintenance cost for offshore wind turbines following multi-level opportunistic preventive strategy", Renewable Energy,  Vol. 85, (2016), 104-113.
International Journal of Engineering
Volume 31, Issue 2
TRANSACTIONS B: Applications
February 2018
Pages 357-364

Files

Share

How to cite

Statistics