IJE TRANSACTIONS A: Basics Vol. 31, No. 7 (July 2018) 1152-1158    Article in Press

PDF URL: http://www.ije.ir/Vol31/No7/A/21-2852.pdf  
downloaded Downloaded: 50   viewed Viewed: 651

V. Morenov, E. Leusheva and A. Martel
( Received: November 19, 2017 – Accepted in Revised Form: January 29, 2018 )

Abstract    The article considers the issue of reducing the influence of clayless mud components on the filtration parameters of the reservoir. In the composition of such solutions, calcium carbonate of various fractions is often added as a weighting and colmatizing additive. It is generally accepted that weighting bridging agents are sufficiently inert substances and their addition does not affect the rheological parameters of drilling fluids. Assessment of the fractional composition effect of carbonate weighting agents on the structural-rheological parameters of the biopolymer drilling mud used for drilling productive reservoirs was made in the paper. Six types of carbonate weighting agents with an average particle size of 5 to 150 μm were evaluated during the study. Rheological curves were constructed and the obtained results are analyzed. Also the article reviews four main methods for selecting fractional composition of the weighting agents. doi: 10.5829/ije.2018.31.07a.21


Keywords    Bridging Agent; Drilling Mud; Rheological Properties; Weighting Agent


چکیده    در مقاله مسأله کاهش تاثیر گل حفاری بدون کانی رسی بر خواص فیلتراسیون مخزن، مورد توجه قرار گرفته است. در ترکیب این گونه گل ها، کلسیم کربنات اغلب به عنوان عامل وزنی با اندازه ذرات مختلف استفاده می گردد. به طور کلی مشخص است که عوامل وزنی مواد خنثی هستند که خواص رئولوژیکی گل حفاری را تحت تاثیر قرار نمی دهند. در این مقاله تاثیر عوامل وزنی کربناته بر خواص ساختاری و رئولوژیکی گل بیوپلیمری که برای حفاری لایه تولیدی توسعه یافته است، مورد بررسی قرار می گیرد. در طول مطالعه شش نوع ماده وزنی کربناته با سایز میانگین ذرات 5 تا 150 میکرومتر مورد ارزیابی قرار گرفته اند. منحنی های رئولوژیکی ترسیم و نتایج مورد بررسی قرار گرفته اند. در مقاله هم چنین چهار روش برای انتخاب اندازه مناسب عوامل وزنی مطرح شده اند.


1.     Ishbaev, G., Dilmiev, М., Khristenko, А. And Mileyko, А., "Bridging theories of particle size distribution", Drilling and Oil,  Vol., No. 6, (2011), 16-18.

2.     Abrams, A., "The influence of fluid viscosity, interfacial tension, and flow velocity on residual oil saturation left by waterflood", Society of Petroleum Engineers Journal,  Vol. 15, No. 05, (1975), 437-447.

3.     Abrams, A., "Mud design to minimize rock impairment due to particle invasion", Journal of Petroleum Technology,  Vol. 29, No. 05, (1977), 586-592.

4.     Kaeuffer, M., "Determination de l’optimum de remplissage granulometrique et quelques proprietes s’y rattachant", in Congres de I’AFTPV, Rouen., (1973).

5.     Vickers, S., Cowie, M., Jones, T. and Twynam, A.J., "A new methodology that surpasses current bridging theories to efficiently seal a varied pore throat distribution as found in natural reservoir formations", Wiertnictwo, Nafta, Gaz,  Vol. 23, No. 1, (2006), 501-515.

6.     Dick, M., Heinz, T., Svoboda, C. and Aston, M., "Optimizing the selection of bridging particles for reservoir drilling fluids", in SPE international symposium on formation damage control, Society of Petroleum Engineers., (2000).

7.     Belton, V. and Vickers, S., Use of a simple multi-attribute value function incorporating visual interactive sensitivity analysis for multiple criteria decision making, in Readings in multiple criteria decision aid. 1990, Springer.319-334.

8.     Whitfill, D., "Lost circulation material selection, particle size distribution and fracture modeling with fracture simulation software", in IADC/SPE Asia Pacific drilling technology conference and exhibition, Society of Petroleum Engineers., (2008).

9.     Lamb, K.F., Harper, B.F., Ali, S.A., Darring, M.T., Marine, H.C. and Foxenberg, W.E., "Fluid-loss pills control losses through sand-control screens without damage or cleanup treatment", in Asia Pacific Oil and Gas Conference and Exhibition, Society of Petroleum Engineers., (2007).

10.   Moradi, S.S.T. and Nikolaev, N.I., "Considerations of well cementing materials in high-pressure, high-temperature conditions", International Journal of Engineering, Transactions C: Aspectos,  Vol. 29, No. 9, (2016), 1214-1218.

11.   Morenov, V. and Leusheva, E., "Energy delivery at oil and gas wells construction in regions with harsh climate", International Journal of Engineering-Transactions B: Applications,  Vol. 29, No. 2, (2016), 274-279.

12.   Moradi, S.T. and Nikolaev, N., "Optimization of cement spacer rheology model using genetic algorithm", IJE Trans. A Basics,  Vol. 29, No. 1, (2016), 127-131.

13.   Moradi, S.T. and Nikolaev, N.I., "Sedimentation stability of oil well cements in directional wells", International Journal of Engineering-Transactions A: Basics,  Vol. 30, No. 7, (2017), 1105-1109.

14.   Morenov, V. and Leusheva, E., "Development of drilling mud solution for drilling in hard rocks", International Journal of Engineering,  Vol. 30, No. 4, (2017), 620-626.

15.   Nikolaev, N. and Leusheva, E., "Development of drilling fluids composition for efficiency increase of hard rocks drilling", Journal of Mining Institute,  Vol. 219, (2016), 412-420.

16.   Huang, X. and Garcia, M.H., "A herschel–bulkley model for mud flow down a slope", Journal of fluid mechanics,  Vol. 374, (1998), 305-333.

17.   Moradi, S., Nikolaev, N. and Leusheva, E., "Improvement of cement properties using a single multi-functional polymer", International Journal of Engineering,  Vol. 31, No. 1, (2018), 181-187.

18.           Nikolaev, N.I. and Haoya, L., "Results of cement-to-rock contact study", Записки Горного института,  Vol. 226, No., (2017), DOI: 10.25515/PMI.2017.4.428.

Download PDF 

International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir